Cements, Asphalt & Macadam

A superior Portland-limestone cement for general purpose work, Mastercrete has improved resistance to freeze/thaw attack when compared to traditional cement. It also has a lower water demand than traditional cement and produces a more cohesive mix.

Mastercrete is suitable for use in concretes, bricklaying, floor screeds and renders.

A pre-mixed general-purpose mortar mix, Blue Hawk sand and cement mortar is suitable for bricklaying, rendering, tile fixing, paths, rockeries, and general repairs on concrete, bricks, and masonry. This product offers an extended storage life with Blue Hawk Portland cement in a polythene bag and fine-washed sand in the tub. All Blue Hawk bags and tubs are weather-resistant, durable and made from at least 30% recycled plastic.

A pre-mixed general-purpose mortar mix, Blue Hawk sand and cement mortar is suitable for bricklaying, rendering, tile fixing, paths, rockeries, and general repairs on concrete, bricks, and masonry. This product offers an extended storage life with Blue Hawk Portland cement in a polythene bag and fine-washed sand in the tub. All Blue Hawk bags and tubs are weather-resistant, durable and made from at least 30% recycled plastic.

FP McCann General Purpose Concrete is a factory produced 25N General Purpose Concrete that is ready to use straight from the bag and suitable for a wide variety of uses.

Features

Available in 20kg bags
Produced in a factory controlled environment – consistent high level quality
Quick and convenient to use, just add water
All material required is contained with this bag. Adding additional material is not recommended
Can be mixed by hand or with tradition mechanical mixer

Typical Application

Repair & maintenance
Paths & Steps
Foundations and garden shed/greenhouse bases

FP McCann Postmix offers a factory produced product that is fast setting and ready to use. Contents of each bag consists of blended sand and aggregates, Portland cement and special additives.

Features

Available in 20kg bags
Produced in a factory controlled environment – consistent high level quality
All material required is contained with this bag. Adding additional material is not recommended
Can be mixed by hand or with tradition mechanical mixer

Typical Application

Gate Posts
Fence Posts
Line Posts
Rotary lines

Everbuild Jetcem Premix Sand and Cement is a premixed sand/cement based product which is easy-to-use and sets in approximately 30 min. Ideal for rapid patching or when a fast repair job is needed. Sets in the cold and wet.

Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes.

Rapid setting (30 minutes, depending on ambient temperature and conditions).
Easy mixing, just add water.
Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement)

Benefits:

Internal and external repairs to gaps and cracks and walls and floors.
Repairing flags, slabs, stones and bricks.
Patching steps and window sills.
Pointing brick and stone.
Jointing earthenware pipes and drains.
Repairs to ponds and pools.
Setting in W/Cs and sinks.
Leak sealing in concrete based surfaces.
Setting railings and posts.

Rugby® Black Bitumen Macadam is a cold lay deferred-set compound carefully formulated for ease of use and to give good results every time when repairing patches or refurbishing concrete.

Rugby Post Mix Professional is the ideal time and effort saving solution for domestic or commercial applications such as fixing posts, road signs or bollards where a smoother surface finish may be required. This is achieved by using a finer aggregate in the mix. As with Rugby Post Mix no mixing with water is required before placing.

Rugby® White is a white Portland cement with similar setting and hardening properties to standard grey cements. Colour-forming materials (principally oxides of iron) are excluded or minimised in the manufacturing process in order to produce a white cement. Rugby® White is suitable for production of attractive and durable visual concrete, mortars and renders

FP McCann General Purpose Mortar is a factory produced mortar consisting of blended sand, Portland cement and special additives that conforms to BS EN 998-2 and meets the requirements of a designation III strength category (M4) mortar.

Features

Available in 20kg bags
Produced in a factory controlled environment, ensuring a consistent and high-level quality
Quick and convenient to use – just add water
All material required is contained within this bag – adding additional material is not recommended

Typical Application

General repairs & maintenance
Brick & block laying
Pointing & patching