Floor & Wall Tile Adhesives

Everbuild 703 Fix & Grout Tile Adhesive is a premium grade adhesive, which has been formulated to be used as both an adhesive and grout. The product contains a fungicide to prevent mould growth and dries to a brilliant white finish.
Tested to EN 12004 type D2T.

BENEFITS:
- Excellent water resistance
- Extremely high bond strength - over double the B. S. minimum requirement in wet shear (7 days drying, 7 days water immersion followed for slight thermal movement
- Dries brilliant white
- Contains a fungicide - prevents mould growth
- Ready mixed formula - no mixing, no mess. Apply straight from the tub
- Easier to apply than most competitive adhesives
- Extended open time

AREAS FOR USE:
- Kitchen/Bathroom walls
- Shower areas
- Communal and power showers
- Work tops subject to water contact

Everbuild 711 TileSet Flexiplus Tile Adhesive is a quick setting floor and wall tile mortar with added latex powder for improved flexibility. Can be used on prepared wooden floors, interior and exterior use where same day fixing and grouting is required.

Tested to EN12004 Class C2FTE S1

SURFACES/ PREPARATION

Concrete/Screeds/Renders/unskimmed plasterboard/blockwork- Allow fresh concrete etc to dry for at least 4 weeks before tiling. Ensure floors are free from rising damp. Prime surfaces with EVERBUILD PVA BOND diluted 4 parts water to 1 part PVA Bond and allow to dry.

Timber Floors - Suitable for interior timber floors only. Ensure adequate ventilation beneath floors. Cover wooden floors with moisture resistant exterior grade (marine) plywood, which must be at least 12mm thick. Secure with screws, not nails, at 300mm centres. Prime with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allow to dry.

Softwood tongue and groove boarding- Boards must be screwed (not nailed) down to joists at 300mm centres and surfaces sealed with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allowed to dry.

Existing tiling. Ensure tiles are securely bonded to wall or floor. Roughen surface of glazed tiles with sander. Apply a bonding coat of neat EVERBUILD PVA BOND. Apply mixed adhesive whilst bonding coat is still tacky.

"Essential Tile Adhesive is a standard-setting floor and tile adhesive perfect for fixing ceramics or mosaics on most backgrounds. A slow setting adhesive – with an 5 hour pot life and 20 minute open time – it is ideal for fixing large areas or tiles which are difficult to fix Water and frost resistant, it can be used externally and is suitable for most commercial and domestic environments For ceramic and mosaic tiles Excellent Non-Slip Easy to Use Interior and Exterior Use Available in Grey and White At 3mm thickness: 2kg/m2 for dry wall areas, 3.5kg/m2 for floors, exterior and wet areas"

"A flexible wall and floor grout available in eight colours for use with ceramic, porcelain, natural stone and mosaic tiles. Water and frost-resistant powder-based grout suitable for use with both wall and floor tiles Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration Also suitable for use with brick slips Smooth but hardwearing finish 1-15mm Joint Widths All tile types Reduced efflorescence Matching FX-90 Silicone Sealant Available in 8 colours Tile Size: 200x300x7mm, Joint Width: 2mm, Approx Coverage: 0.20 kg/m2; Tile size: 300x600x10mm, Joint Width: 5mm, Approx Coverage: 0.42 kg/m5"

"A flexible wall and floor grout available in eight colours for use with ceramic, porcelain, natural stone and mosaic tiles. Water and frost-resistant powder-based grout suitable for use with both wall and floor tiles Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration Also suitable for use with brick slips Smooth but hardwearing finish 1-15mm Joint Widths All tile types Reduced efflorescence Matching FX-90 Silicone Sealant Available in 8 colours Tile Size: 200x300x7mm, Joint Width: 2mm, Approx Coverage: 0.20 kg/m2; Tile size: 300x600x10mm, Joint Width: 5mm, Approx Coverage: 0.42 kg/m9"

"A flexible wall and floor grout available in eight colours for use with ceramic, porcelain, natural stone and mosaic tiles. Water and frost-resistant powder-based grout suitable for use with both wall and floor tiles Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration Also suitable for use with brick slips Smooth but hardwearing finish 1-15mm Joint Widths All tile types Reduced efflorescence Matching FX-90 Silicone Sealant Available in 8 colours Tile Size: 200x300x7mm, Joint Width: 2mm, Approx Coverage: 0.20 kg/m2; Tile size: 300x600x10mm, Joint Width: 5mm, Approx Coverage: 0.42 kg/m11"

"A flexible wall and floor grout available in eight colours for use with ceramic, porcelain, natural stone and mosaic tiles. Water and frost-resistant powder-based grout suitable for use with both wall and floor tiles Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration Also suitable for use with brick slips Smooth but hardwearing finish 1-15mm Joint Widths All tile types Reduced efflorescence Matching FX-90 Silicone Sealant Available in 8 colours Tile Size: 200x300x7mm, Joint Width: 2mm, Approx Coverage: 0.20 kg/m2; Tile size: 300x600x10mm, Joint Width: 5mm, Approx Coverage: 0.42 kg/m13"

"A flexible wall and floor grout available in eight colours for use with ceramic, porcelain, natural stone and mosaic tiles. Water and frost-resistant powder-based grout suitable for use with both wall and floor tiles Ideal for grouting ceramic, porcelain, and mosaic tiles in interior and exterior locations including power showers (without body jets) and swimming pools The flexible nature of the product reduces the risk of cracking, leaving a super smooth but hard wearing finish without patchiness or surface discolouration Also suitable for use with brick slips Smooth but hardwearing finish 1-15mm Joint Widths All tile types Reduced efflorescence Matching FX-90 Silicone Sealant Available in 8 colours Tile Size: 200x300x7mm, Joint Width: 2mm, Approx Coverage: 0.20 kg/m2; Tile size: 300x600x10mm, Joint Width: 5mm, Approx Coverage: 0.42 kg/m15"

"A ready-mixed all-in-one tile adhesive and grout specially formulated for fixing ceramic or mosaic wall tiles in showers, bathrooms, toilet areas and kitchens. It may also be used just as an adhesive in power showers if a suitable grout is used. All-in-one Non slip Easy to use For walls Approximately 1.3 l/m2 in dry areas, depending on flatness of surface, or 2.6 l/m2 in wet areas Grout coverage varies according to tile size and joint width As a guide Multipurpose FIX ‘N’ GROUT is sufficient to grout at approximately 0.3 l/m2 when using 200mm x 200mm x 8mm tiles with 3mm joints, or at approximately 0.8 l/m2 when using 20mm x 20mm x 5mm tiles with 2mm joints"

"A ready-mixed, high performance ceramic wall tile adhesive specially formulated for fixing ceramic or mosaic wall tiles in wet areas such as showers, power showers, bathrooms and wet rooms, as well as kitchens and other areas. The excellent non-slip characteristics reduce the need for battens Ideal for fixing to flat internal wall surfaces such as plaster, plasterboard, cement: sand rendering and existing tiles Ready mixed Waterproof Instant grab Approximately 2kg/m2 in dry areas, depending on flatness of surface, or 3kg/m2 in wet areas"

"A mix-with-water powder grout suitable for use in both interior and exterior areas including showers. Also suitable for use in swimming pools, when mixed with Dunlop Flexible Adhesive Smooth finish For Cermaic and Mosaic Tiles up to 3mm wide Interior and Exteriro use Available in white and Ivory It varies :- Tile Size: 150x150x6mm, Joint Width: 2mm Approx. Coverage: 0.21 kg/m²; Tile Size: 250x200x7.5m, Joint Width: 3mm Approx. Coverage: 0.26 kg/m²; Tile Size: 50x50x5.5mm, Joint Width: 2mm Approx. Coverage: 0.54 kg/m²"

"A mix-with-water powder grout suitable for use in both interior and exterior areas including showers. Also suitable for use in swimming pools, when mixed with Dunlop Flexible Adhesive Smooth finish For Cermaic and Mosaic Tiles up to 3mm wide Interior and Exteriro use Available in white and Ivory It varies :- Tile Size: 150x150x6mm, Joint Width: 2mm Approx. Coverage: 0.21 kg/m²; Tile Size: 250x200x7.5m, Joint Width: 3mm Approx. Coverage: 0.26 kg/m²; Tile Size: 50x50x5.5mm, Joint Width: 2mm Approx. Coverage: 0.54 kg/m²"