Bolts, Nuts & Washers

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

"Mild Steel. Finish: Zinc Plated. Bright zinc plated for increased corrosion resistance. 25mm outside diameter. Main purpose of washers is to distribute the load under a bolt head or nut face."

"Mild Steel. Finish: Zinc Plated. Bright zinc plated for increased corrosion resistance. 25mm outside diameter. Main purpose of washers is to distribute the load under a bolt head or nut face."

Square profile.
Steel.
Finish: Zinc Plated.
Split at one point and bent into a helical shape.

"Square profile. Steel. Finish: Zinc Plated. Split at one point and bent into a helical shape."

"Wing Nuts and Washers. Mild Steel. Finish: Zinc Plated. Wings enable easy fastening without the use of tools. Wing nuts and washers together offering total fastening solution."

"Wing Nuts and Washers. Mild Steel. Finish: Zinc Plated. Wings enable easy fastening without the use of tools. Wing nuts and washers together offering total fastening solution."

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

Gripit Plasterboard Fixings are designed for use with all types of plasterboard installation. The unique Gripit wings fold out in small cavity spaces to create a vice-like grip.

Gripit Yellow Fixings allow you to fix really heavy stuff, like curtain rails to plasterboard walls. They are strong enough for all of the swags and tails as well. One Gripit Yellow holds up to 71kg.

Easy to install, you will require a 15mm drill bit. They are also removable and reusable. Each Gripit Yellow is supplied with a 4.0 x 25mm screw.

This Pack of Gripit Yellow Plasterboard Fixings contains:

4 x Gripit Yellow Fixings
4 x Screws 4.0 x 25mm

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M10 x 1000
Thread Dia. mm: M10
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M12 x 1000
Thread Dia. mm: M12
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M6 x 1000
Thread Dia. mm: M6
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M8 x 1000
Thread Dia. mm: M8
Thread Type: Metric

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Bolt Length mm: 135
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Max Fixture Thickness mm: 75
Min Drill Hole Depth mm: 70
Point Type: B Point
Shield Length mm: 60
Socket Size mm: 17
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Loose
Washer Size mm: M10

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 225
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 20
Edge Distance mm: 120
Fixture Hole Diameter mm: 14
M12 Hex Full Nuts (Qty 10)
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 85
Nut Size mm: M12
Nut Socket Size mm: 19
Point Type: B Point
Shield Length mm: 75
Stud Length mm: 120
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M12
Thread Type: Metric
Type: Projecting
Washer Size mm: M12

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Edge Distance mm: 75
Fixture Hole Diameter mm: 10
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 60
Nut Size mm: M8
Nut Socket Size mm: 13
Point Type: B Point
Shield Length mm: 50
Stud Length mm: 120
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M8
Thread Type: Metric
Type: Projecting
Washer Size mm: M8

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 75
Screw Size mm: M5 x 75
Substrates: Drywall, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 75
Thread Type: Metric
Wall and Fixture Thickness mm: 45

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 140
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 10
Edge Distance mm: 70
Fixture Hole Diameter mm: 12
Max Fixture Thickness mm: 55
Min Drill Hole Depth mm: 50
Nut Size mm: M10
Nut Socket Size mm: 17
Nut Type: Hex Full
Size Thread Dia. x L mm: M10 x 120
Substrates: Concrete
Thread Dia. mm: M10
Thread Type: Metric
Washer Size mm: M10 x 21
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 100
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 110
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 8
Edge Distance mm: 55
Fixture Hole Diameter mm: 9
Included Items: M8 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 45
Nut Size mm: M8
Nut Socket Size mm: 13
Nut Type: Hex Full
Size Thread Dia. x L mm: M8 x 100
Substrates: Concrete
Thread Dia. mm: M8
Thread Type: Metric
Washer Size mm: M8 x 17
Washer Type: Form A