Building Adhesives Ltd - Dunlop

"Flexible and protein free, Dunlop LX-200 Flex Leveller is perfect for smoothing to a feather edge up to 5mm and 5mm-20mm. Thanks to its increased flexibility it is suitable for use with existing underfloor heating (following commissioning of the underfloor heating screed). Single-part floor leveller with built-in polymer for increased flexibility Suitable for preparing interior floors prior to laying sheet and tile soft floor coverings, natural stone, porcelain and ceramic tiles It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement:sand screeds, terrazzo, asphalt, quarry tiles and old but sound adhesive residues It can be laid at depths from a feather edge up to 5mm and from 5mm-20mm with the addition of 3mm granite chippings Smooths to a feather edge For use on underfloor heating Protein free Foot traffic in 3 hours"

"A ready-mixed all-in-one tile adhesive and grout specially formulated for fixing ceramic or mosaic wall tiles in showers, bathrooms, toilet areas and kitchens. It may also be used just as an adhesive in power showers if a suitable grout is used. All-in-one Non slip Easy to use For walls Approximately 1.3 l/m2 in dry areas, depending on flatness of surface, or 2.6 l/m2 in wet areas Grout coverage varies according to tile size and joint width As a guide Multipurpose FIX ‘N’ GROUT is sufficient to grout at approximately 0.3 l/m2 when using 200mm x 200mm x 8mm tiles with 3mm joints, or at approximately 0.8 l/m2 when using 20mm x 20mm x 5mm tiles with 2mm joints"

"A ready-mixed, high performance ceramic wall tile adhesive specially formulated for fixing ceramic or mosaic wall tiles in wet areas such as showers, power showers, bathrooms and wet rooms, as well as kitchens and other areas. The excellent non-slip characteristics reduce the need for battens Ideal for fixing to flat internal wall surfaces such as plaster, plasterboard, cement: sand rendering and existing tiles Ready mixed Waterproof Instant grab Approximately 2kg/m2 in dry areas, depending on flatness of surface, or 3kg/m2 in wet areas"

"A mix-with-water powder grout suitable for use in both interior and exterior areas including showers. Also suitable for use in swimming pools, when mixed with Dunlop Flexible Adhesive Smooth finish For Cermaic and Mosaic Tiles up to 3mm wide Interior and Exteriro use Available in white and Ivory It varies :- Tile Size: 150x150x6mm, Joint Width: 2mm Approx. Coverage: 0.21 kg/m²; Tile Size: 250x200x7.5m, Joint Width: 3mm Approx. Coverage: 0.26 kg/m²; Tile Size: 50x50x5.5mm, Joint Width: 2mm Approx. Coverage: 0.54 kg/m²"

"A mix-with-water powder grout suitable for use in both interior and exterior areas including showers. Also suitable for use in swimming pools, when mixed with Dunlop Flexible Adhesive Smooth finish For Cermaic and Mosaic Tiles up to 3mm wide Interior and Exteriro use Available in white and Ivory It varies :- Tile Size: 150x150x6mm, Joint Width: 2mm Approx. Coverage: 0.21 kg/m²; Tile Size: 250x200x7.5m, Joint Width: 3mm Approx. Coverage: 0.26 kg/m²; Tile Size: 50x50x5.5mm, Joint Width: 2mm Approx. Coverage: 0.54 kg/m²"