Bostik Fungicidal Wash has been formulated to kill moulds, lichen and algae on external surfaces such as brick, render, patios, paving and drives.This water-based solution is suitable for exterior use only. Powerful formulation. Kills moss. lichen and algae. For outdoor use only.
Everbuild Opti-Mix Mortar Plasticiser is the world’s first 1:25 plasticiser is just Pure Admix, smells and works like the best traditional Admix. Benefits include: superior plasticising action, controlled dosage, consistent mix design, easy to use, no waste. 1 litre is equivalent to 25 litres of standard product.
Everbuild Sika-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
DrySeal has a unique, thixotropic consistency and excellent water-repellent properties on a range of building materials. As opposed to conventional liquid products, Dryseal can be applied in one working operation to achieve the desired loading for maximum effectiveness. Dependent on porosity, the effective siloxane ingredient deeply penetrates the substrate within a short period of time (between 30 minutes to several hours) where it reacts to become a polymer silicone resin. DrySeal also protections against pollutants and damage from frost and salt, and prevents water penetration even under wind pressure. Typical Coverage: approx. 20 - 25 m² in a one coat application, dependent on substrate porosity
Enviroseal is a highly-effective, liquid based water repellent containing silicone emulsion for use above ground. It can be applied to multiple substrates, including porous brickwork, cement renderings, asbestos, cement or mineral boards, unglazed tiles, cast concrete, roughcast, stonework (including calcareous materials such as those containing limestone), wood, canvas and leather. Surfaces treated with Enviroseal remain permeable to vapour so that moisture within the structure does not remain trapped. Enviroseal is clear and colourless and will not normally alter the appearance of treated surfaces. In some cases, however, very slightly darkening may occur, so a small test area should be applied when appearance is critical. Depending upon the nature of the surface treated and conditions of exposure, two coats of Enviroseal can be effective for at least 10 years.