Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Clearance
Centurion Drawing Pins, Gold
27063
A short flat-headed pin. Used for fastening paper, thin cardboard etc to a wall or other surface.
£0.72
De-icer Spray 500ml
38046
Decosol Car Windscreen De-icer Spray makes screen cleaning easy on frosty mornings. Trigger spray means no accelerants are used.
Size: 500ml
Size: 500ml
£3.67
Ready Mixed Screenwash All Seasons Formula 5 litre
37091
This ready mixed screenwash solution in a 5 litre plastic container. This screenwash is ideal for removing traffic film and road dirt without smearing.
Used as supplied will give protection to -3°.
Used as supplied will give protection to -3°.
£6.17
Milwaukee Jigsaw Metal Traditional Blades 55 X 1.2 MM T 118 A - 5 PCS
04137
FEATURES
Blade reference 4939274652 is especially suited to cutting very thin sheet material because of its low 0.7 mm tooth pitch.
For those professionals desiring extra lifetime and durability we recommend the use of Bi-Metal blades in conjunction with a suitable cooling lubricant, the blades lifetime is double that of non Bi-Metal blades.
Blade reference 4939274652 is especially suited to cutting very thin sheet material because of its low 0.7 mm tooth pitch.
For those professionals desiring extra lifetime and durability we recommend the use of Bi-Metal blades in conjunction with a suitable cooling lubricant, the blades lifetime is double that of non Bi-Metal blades.
£4.41
Milwaukee Jigsaw Wood & Plastic Clean & Splinter Free Cutting Blades 75 X 2.5 MM T 101 B - 5 PCS
020725
FEATURES
The following blades have diagonally sharpened side teeth resulting in a very clear splinter free cut.
The following blades have diagonally sharpened side teeth resulting in a very clear splinter free cut.
£3.84
Milwaukee Jigsaw Wood & Plastic Special Application Laminated Parquet Flooring 50 X 1.35 MM T 101 AO - 5 PCS
020715
FEATURES
Blade 4932373392 is ideally suited for cutting curves and irregular shapes. Use blade 4932373083 for straight cuts.
Blade 4932373392 is ideally suited for cutting curves and irregular shapes. Use blade 4932373083 for straight cuts.
£3.84
Milwaukee Jingsaw Wood & Plastic Traditional Blades 75 X 3 MM T 111 C - 5 PCS
020745
FEATURES
Traditional blades that deliver good and solid performance.
Traditional blades that deliver good and solid performance.
£2.05
Milwaukee Red Hex - Shockwave™ HSS-TIN Metal Drill Bit SHOCKWAVE HSS-G TIN RED HEX 10 MM - 1 PC
03028
FEATURES
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
£16.95
Milwaukee Red Hex - Shockwave™ HSS-TIN Metal Drill Bit SHOCKWAVE HSS-G TIN RED HEX 2 MM - 2 PCS
03021
FEATURES
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
£2.89
Milwaukee Red Hex - Shockwave™ HSS-TIN Metal Drill Bit SHOCKWAVE HSS-G TIN RED HEX 3.2 MM - 2 PCS
03024
FEATURES
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
£4.04
Milwaukee Red Hex - Shockwave™ HSS-TIN Metal Drill Bit SHOCKWAVE HSS-G TIN RED HEX 4.5 MM - 1 PC
03025
FEATURES
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
£5.08
Milwaukee Red Hex - Shockwave™ HSS-TIN Metal Drill Bit SHOCKWAVE HSS-G TIN RED HEX 5 MM - 1 PC
03026
FEATURES
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
£5.10
Milwaukee Red Hex - Shockwave™ HSS-TIN Metal Drill Bit SHOCKWAVE HSS-G TIN RED HEX 6 MM - 1 PC
03027
FEATURES
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
£6.92
Milwaukee SHOCKWAVE™ Impact Duty Locking Bit Holder
04139
FEATURES
Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
Optimised SHOCK ZONE™ absorbs up to 3X more torque.
Dual internal magnets ensure magnetism to fasteners.
Auto-Locking - One handed bit release.
¼″ Hex reception (DIN 3126 - E 6.3). Very suitable for high torque and impact applications.
Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
Optimised SHOCK ZONE™ absorbs up to 3X more torque.
Dual internal magnets ensure magnetism to fasteners.
Auto-Locking - One handed bit release.
¼″ Hex reception (DIN 3126 - E 6.3). Very suitable for high torque and impact applications.
£7.27
Milwaukee SHOCKWAVE™ Impact Duty Magnetic Bit Holder
04138
FEATURES
Custom engineered steel and heat treatment for maximum strength and flexibility.
Optimised SHOCK ZONE™ absorbs up to 3X more torque for more resistance to shock from impacting.
Strong magnetic tip for secure grip.
¼″ Hex reception (DIN 3126 - E 6.3). Very suitable for high torque and impact applications.
Custom engineered steel and heat treatment for maximum strength and flexibility.
Optimised SHOCK ZONE™ absorbs up to 3X more torque for more resistance to shock from impacting.
Strong magnetic tip for secure grip.
¼″ Hex reception (DIN 3126 - E 6.3). Very suitable for high torque and impact applications.
£6.93
Milwaukee Thunderweb - HSS-GROUND Metal Drill Bit - DIN338 TW 10.0 X 133 - 1 PC
03034
FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
£8.47
Milwaukee Thunderweb - HSS-GROUND Metal Drill Bit - DIN338 TW 12.0 X 151 - 1 PC
03035
FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
£9.20
Milwaukee Thunderweb - HSS-GROUND Metal Drill Bit - DIN338 TW 3.0 X 61 - 2 PCS
03029
FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
£3.33
Milwaukee Thunderweb - HSS-GROUND Metal Drill Bit - DIN338 TW 3.2 X 65 - 2 PCS
03030
FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
£3.55
Milwaukee Thunderweb - HSS-GROUND Metal Drill Bit - DIN338 TW 5.0 X 86 - 1 PC
03032
FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
£2.55
Milwaukee Thunderweb - HSS-GROUND Metal Drill Bit - DIN338 TW 6.0 X 93 - 1 PC
03033
FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
135° Split point - Precision starting, drill bit won't walk on material surface.
Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.
£3.46
Milwaukee Torx Shockwave Impact Duty Screwdriving Bits TX15 X 25 MM - 2 PCS
04135
FEATURES
Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.
Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
SHOCK ZONE™ Geometry - designed to flex:
SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.
Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
SHOCK ZONE™ Geometry - designed to flex:
SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
£0.82
Milwaukee Torx Shockwave Impact Duty Screwdriving Bits TX30 X 25 MM - 2 PCS
04134
FEATURES
Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.
Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
SHOCK ZONE™ Geometry - designed to flex:
SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.
Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
SHOCK ZONE™ Geometry - designed to flex:
SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
£0.82
Timloc InvisiWeep White
M9087
**Sold Individually**
"Multi-function product for discharging water from external walls
Integral 4mm vermin barrier and rainwater baffle as recommended by BS5250, to reduce ingress of large nest building insects, mammals, and rainwater penetration to the cavity.
External ribs & tapered profile, to key into mortar for secured fixing
Full height upstand to cavity side, to maintain drainage and minimise the impact on blockage from cavity cement build up
Discrete water outlet, to minimise the impact and reduce visibility for a truly concealed wall weep
Venturi effect outlet tube to reduce pressure, allowing for optimal water drainage
Manufactured to BS EN ISO 9001 and BS EN ISO 14001
Meets British standards; BS5250, BS8000, BS5628, BS8215
Satisfies all NHBC requirements
Complies with all relevant Building Regulations"
"Multi-function product for discharging water from external walls
Integral 4mm vermin barrier and rainwater baffle as recommended by BS5250, to reduce ingress of large nest building insects, mammals, and rainwater penetration to the cavity.
External ribs & tapered profile, to key into mortar for secured fixing
Full height upstand to cavity side, to maintain drainage and minimise the impact on blockage from cavity cement build up
Discrete water outlet, to minimise the impact and reduce visibility for a truly concealed wall weep
Venturi effect outlet tube to reduce pressure, allowing for optimal water drainage
Manufactured to BS EN ISO 9001 and BS EN ISO 14001
Meets British standards; BS5250, BS8000, BS5628, BS8215
Satisfies all NHBC requirements
Complies with all relevant Building Regulations"
£0.36
Zinc Protected Hose Clip 30 - 40mm
49155
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001.
Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.
Size 1X
Adjustment 30 - 40mm.
Adjustment. 1.1/8 - 1.5/8in
Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.
Size 1X
Adjustment 30 - 40mm.
Adjustment. 1.1/8 - 1.5/8in
£1.73
Soudal Solvent Free Grab Adhesive White
41058
Soudal Trade Solvent Free Grab Adhesive is a solvent free high performance, fast curing, gap filling grab adhesive. The high strength construction adhesive has good initial grab in both vertical and horizontal positions.
£3.31
Centurion 27mm White Nylon Rocker Catch (Pack of 2)
27006
Our catches aid you in various closure and holding applications such as cupboards, doors and gates. - Ideal for cupboards and cabinet doors - Spring loaded
£0.63
Centurion 25mm EB Unshouldered Cup Hook (Pack of 5)
27047
Our range of hooks enable items to be rested upon them, - These Cup Hooks are ideal for hanging keys, cups and jewellery. - They have the added advantage as being unshouldered allowing to screw further without obstruction.
£0.41
Centurion Twin Roller Catches, 33mm x 27mm, Zinc Plated
28045
Our catches aid you in various closure and holding applications such as cupboards, doors and gates. - Ideal for doors, cupboards, caravans and boats. - Simply fix one side to the frame and the other to the door.
£0.16
Forgefix ForgePack Wood Screw - Black Japanned - 1 1/2" x 8 - Pack of 10
32040
"A traditional woodscrew ideally suited for fixing wrought iron ironmongery. Used to fix hinges, door handles, latches and other ironmongery. An attractive choice for use with wrought iron and other black ironmongery thanks to black japanned finish. Black japanned finish also offers increased durability and reduced weathering."
£0.69
Centurion Telephone Double Adaptor
S094
This adaptor converts a single socket into a double socket and can be plugged into any BT line jack. White Connects 2 Uk telephones into one socket High quality double telephone adaptor Easy to install
£1.50
Butane/Propane Gas Cartridge 190g
06049
The Campingaz C206GLS Gas Cartridge contains a mixutre of Butane/Propane. It is fitted with a Gas Lock System to prevent the majority of residual gas escaping from the cartridge if accidentally disconnected.
Caution: This Product is Highly Flammable.
Caution: This Product is Highly Flammable.
£2.96
Soudal Soudabond Easy Handheld Foam Adhesive 750ML
41050
Soudals Soudabond Easy is is a high performance polyurethane adhesive foam. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces.
£14.50
Centurion Push-In Shelf Supports, 5mm, Brown
27018
For light duty or narrow span shelving. Especially good for fitting in cupboards. Use in chipboard, plywood, thin batten etc. Made of plastic. To fit 5mm hole.
£0.37
Centurion Steel Screw Eyes, 30mm x 6mm, Zinc Plated
27035
Hooks and Eyes that can be used with a variety of internal threaded fixings for static loads. - Ideal for screwing into Timber and similar materials. - Practical for attaching wires, cables and twine.
£0.39
Hozelock AquaStop Plus Hose Connector for 19mm (3/4in) Hose
46010
The AquaStop Plus Connector has an internal valve that stops the water flow when an accessory (e.g. a spray gun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden by stopping the water flow, thus preventing water from being wasted.
All internal parts are made from ultra-tough engineering plastics for a long leak free life and the connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet due to the twin soft touchpads and the hose remains securely connected via the barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting are virtually eliminated due to the ingenious flexible hose-tail on the nut. This fitting is best used at the gun end of the hosepipe.
Suitable for use with all 19mm / 3/4in and 15mm / 5/8in hose.
All internal parts are made from ultra-tough engineering plastics for a long leak free life and the connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet due to the twin soft touchpads and the hose remains securely connected via the barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting are virtually eliminated due to the ingenious flexible hose-tail on the nut. This fitting is best used at the gun end of the hosepipe.
Suitable for use with all 19mm / 3/4in and 15mm / 5/8in hose.
£5.98
Brett Martin 112mm Roundstyle to Half Round Adaptor - Black
16026
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£8.85
Centurion Fuse Wire on Card 5 Amp, 15 Amp and 30 Amp
35099
Handy pack of assorted fuse wire for a variety of applications.
£0.76
DART PZ1 50mm Impact Driver Bit - Pack 10
02102
"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."
£4.68
Brett Martin Paving Collar - Black
57057
"For use with square hopper (B1006).
Lightweight.
Easy to install.
Durable.
Manufactured in the UK."
Lightweight.
Easy to install.
Durable.
Manufactured in the UK."
£12.10
TIMCO 65 x 3.35 Round Wire Nails - Bright 2.5kg
32065
General use with full round head for clamping. Bright nails are self coloured and have no plating.
• Suitable for indoor applications
• Conforms to Eurocode 5 and service class 1
• Suitable for indoor applications
• Conforms to Eurocode 5 and service class 1
£5.30
Centurion White Bellwire T+E Cable Clips
35075
Neatly and securely holds wires in place. BELLWIRE T+E COLOUR: White Pack of 14 Good quality nail Weather and impact resistant
£0.54
Dormer A100 HSS Jobber Drill Bit 11.50mm
53041
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.
They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.
DIN338RN
BS328
ISO235
Tip diameter: 11.00mm.
Working length: 94mm.
Overall length: 142mm.
They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.
DIN338RN
BS328
ISO235
Tip diameter: 11.00mm.
Working length: 94mm.
Overall length: 142mm.
£14.76
42mm White Pipe Collar
11040
Avoids the need to make good around pipework
Can be fitted onto existing pipework
Manufactured from high grade polypropylene
Simple click together system
Can be fitted onto existing pipework
Manufactured from high grade polypropylene
Simple click together system
£0.39
Centurion 20 Amp Consumer Unit Fuse, Pack of 2
35102
BS1361 fuses are designed for use in consumer units, the 20 amp version most often being used for heating circuits and immersion water heaters. SIZE: 20 AMP 240 volts Pack of 2 Pre-packed BS1361
£2.16
Centurion 30 Amp Consumer Unit Fuse, Pack of 2
35103
BS1361 fuses are designed for use in consumer units, the 30 amp version most often being used for protecting plug sockets (ring main) and cooker circuits. SIZE: 30 AMP 240 volts Pack of 2 Pre-packed BS1361
£2.16
Centurion Assorted Fuses
35098
Assorted box of 3 Amp and 14 Amp fuses. SIZE: Assorted Pack of 3 Pre-packed British Made Conforms to BS132/ASTA approved
£0.88
Forgefix ForgePack Wing Nuts & Flat Washers - M6 - Pack of 10
32014
"Wing Nuts and Washers. Mild Steel. Finish: Zinc Plated. Wings enable easy fastening without the use of tools. Wing nuts and washers together offering total fastening solution."
£1.09
Dormer A100 HSS Jobber Drill Bit 11.00mm
53040
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.
They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.
DIN338RN
BS328
ISO235
Tip diameter: 11.00mm.
Working length: 94mm.
Overall length: 142mm.
They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.
DIN338RN
BS328
ISO235
Tip diameter: 11.00mm.
Working length: 94mm.
Overall length: 142mm.
£14.40
Brett Martin 110mm x 112½° Single Socket Offset Bend - Grey
56010
"Quick & Easy to install. Durable and lightweight. UV resistant. Conforms to EN 1329-1"
£15.22
Brett Martin 114mm Squarestyle to 112mm Roundstyle Adaptor - Black
16024
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£9.26
TIMCO 125 x 5.60 Round Wire Nails - Bright 2.5kg
32066
General use with full round head for clamping. Bright nails are self coloured and have no plating.
• Suitable for indoor applications
• Conforms to Eurocode 5 and service class 1
• Suitable for indoor applications
• Conforms to Eurocode 5 and service class 1
£5.91
Centurion Coaxial Socket
35085
Flat plate wall mounted single coaxial socket, perfect for TV or radio aerial feeds. Surface fix ROHS compliant Complete with fixing screw Pre packed
£1.18
Brett Martin 112mm Roundstyle to Half Round Adaptor - White
16027
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£8.85
TIMCO 50 x 2.65 Round Wire Nails - Bright 2.5kg
32064
General use with full round head for clamping. Bright nails are self coloured and have no plating.
• Suitable for indoor applications
• Conforms to Eurocode 5 and service class 1
• Suitable for indoor applications
• Conforms to Eurocode 5 and service class 1
£5.44
Centurion Bales Catch, 13mm, Brassed
27007
Allows doors to be pulled open or pushed closed with ease, - Securely fastens cupboards. - Spring loaded ball bearing for strong hold.
£0.78
Centurion Brass Turn Buttons, 40mm, Polished Brass
27020
Used for securing doors and drawers that are flush with the cabinet. - Suitable for a wide range of diy projects - Ideal for pet and rabbit hutches. - Can be fixed in place using a screw or bolt.
£0.60
Centurion Mirror Corners, Nickel Plated
27049
Ideal for mounting pictures or mirrors. Will hold a mirror up to 6mm deep
£0.68
Forgefix ForgePack Wing Nuts & Flat Washers - M8 - Pack of 8
32015
"Wing Nuts and Washers. Mild Steel. Finish: Zinc Plated. Wings enable easy fastening without the use of tools. Wing nuts and washers together offering total fastening solution."
£1.04
Dormer A100 HSS Jobber Drill Bit 9.50mm
53037
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.
They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.
DIN338RN
BS328
ISO235
Tip diameter: 9.50mm.
Working length: 81mm.
Overall length: 125mm.
They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.
DIN338RN
BS328
ISO235
Tip diameter: 9.50mm.
Working length: 81mm.
Overall length: 125mm.
£8.16
Brett Martin 114mm Squarestyle to 112mm Roundstyle Adaptor - Arctic White
16025
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£9.26
Brett Martin 50mm x 92½° Solvent Cross Tee - White
21013
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£4.35
Min: £0.00 Max: £253.00
£0 £253
Payment options
