Electrical Fittings

This high quality robust ceiling accessory from British General offers durability reliability and ease of installation, and is supplied with approximately 1.8 metres of cord. The 3/80mm ceiling rose has a white satin finish spin on cover, with smooth cable entry for maximum protection of the pendant conductor insulation, and the wiring aperture in the base has an extra knockout for ease of wiring.

Supplied with approximately 1.5 metres of cord

Base incorporates two + loop-in + earth terminals

Spin-on cover with smooth cable entry for maximum protection of pendant conductor insulation

Eight “in-line” terminals all with captive screws

Wiring aperture in base with extra knockout for ease of wiring

Large capacity earth terminal with locking terminal screw

Cover moulded in satin finish urea

Base moulded in clear polycarbonate

3" diameter

This 1.5m pull cord can be used to replace the cord in any ceiling operated switch

This 6A 2 way ceiling switch from British General is supplied with approximately 1.8 metres of cord and comes with a white, satin finish round rose and screw cover caps for a sleek finish. The 2 way switch allows for a second switch position in the circuit, and is ideal for lighting in bathrooms.

Easy to install, supplied with fixing screws and installation instructions

Supplied with approximately 1.5 metres of cord

Suitable for lighting

Choice of cable entries

2 way switching allows for a second switch position in a circuit

Earth terminal in base

This high quality batten holder from British General offers durability reliability and ease of installation. With a white satin finish backplate and skirt mouldings, this 3 terminal T2 rated lamp holder for B22 bayonet cap light bulbs has knock-outs around the circumference to allow for surface wiring. Supplied with a short skirt to hold a lampshade in place.

Easy to install, supplied with fixing screws and installation instructions

Knock outs to allow for surface wiring

3 Terminal, T2 rated

Captive screws prevent screw loss

For B22 bayonet cap lamps

This high quality enclosed batten holder from British General is T2 rated and supplied with heat resistant wire and is suitable use with for B22 Bayonet cap light bulbs. The wiring aperture in the base has an extra knockout for ease of wiring, and incorporates L, N and Loop-in terminals with 8 individual cable entries and captive screws. The base can be removed without removing the HO skirt, and has alternative fixing holes for off centre mounting and ease of installation. The HO skirt is ideal for use in bathrooms and other rooms where moisture is present as it prevents the metal cap of the lamp being touched in damp situations.

Easy to install, supplied with fixing screws and installation instructions

Wiring aperture in base with extra knockout for ease of wiring

Base incorporates L, N and Loop-in terminals with 8 individual cable entries

large capacity Earth terminal with locking terminal screw.

Wired with heat resistant wire

Base cover can be removed without removing HO skirt

Captive screws prevent screw loss

3 Terminal, T2 rated

HO skirt ideal for use in damp rooms such as bathrooms and kitchens as it prevents the metal cap of the lamp being touched in damp situations

For B22 bayonet cap lamps

This classic white pendant set from British General has a 6/150mm flex and 3"/80mm base with a lamp holder to fit B22 Bayonet cap light bulbs. the lamp holder is pre-wired to the cable ready to be fitted to the ceiling rose. Designed with ease of installation in mind.

Easy to fit - supplied with fixings and fitting instructions

Large capacity earth terminal with locking terminal screw

Wiring aperture in base with extra knockout for ease of wiring

Base incorporates L, N and Loop-in terminals with 8 individual cable entries and captive screws

Spin-on-cover with smooth cable entry for maximum protection of pendant conductor insulation

Alternative fixing holes allow for off centre mounting

0.75mm² two core circular cable

Cover moulding produced in satin finish urea

Base moulding produced in clear polycarbonate

Lampholder prewired to cable ready to be fitted to ceiling rose

13 Amp fuses are for appliance plugs rated between 700 watts and 3000 watts. SIZE: 13 AMP Pack of 3 Pre-packed British Made Conforms to BS132/ASTA approved

BS1361 fuses are designed for use in consumer units, the 15 amp version most often being used for heating circuits and immersion water heaters. SIZE: 15 AMP 240 volts Pack of 2 Pre-packed BS1361

6 way terminal blocks used to secure and or terminate wires, useful for connecting electrical switches and outlets to the mains. SIZE: 15 AMP

BS1361 fuses are designed for use in consumer units, the 20 amp version most often being used for heating circuits and immersion water heaters. SIZE: 20 AMP 240 volts Pack of 2 Pre-packed BS1361

3 Amp fuses are commonly found in plugs for appliances rated up to about 700 watts. SIZE: 3 AMP Pack of 3 Pre packed British Made Conforms to BS132/ASTA approved

6 way terminal blocks used to secure and or terminate wires, useful for connecting electrical switches and outlets to the mains. SIZE: 3 AMP

BS1361 fuses are designed for use in consumer units, the 30 amp version most often being used for protecting plug sockets (ring main) and cooker circuits. SIZE: 30 AMP 240 volts Pack of 2 Pre-packed BS1361

6 way terminal blocks used to secure and or terminate wires, useful for connecting electrical switches and outlets to the mains. SIZE: 30 AMP

BS1361 fuses are designed for use in consumer units, the 45 amp version most often being used for protecting electric shower circuits. SIZE: 45 AMP 240 volts Pack of 2 Pre-packed BS1361

BS1361 fuses are designed for use in consumer units, the 5 amp version most often being used for lighting circuits. SIZE: 5 AMP 240 volts Pack of 2 Pre-packed BS1361

5 Amp consumer unit fuses (also known as a Cartridge fuse) are shorter than a standard plug top fuse and are mainly used for lighting circuits.
SIZE: 5 AMP
Pack of 3
Pre-packed
British Made
Conforms to BS132/ASTA approved

6 way terminal blocks used to secure and or terminate wires, useful for connecting electrical switches and outlets to the mains. SIZE: 5 AMP

6mm Flat T+E Grey Cable Clip (Pack of 10)

Assorted box of 3 Amp and 14 Amp fuses. SIZE: Assorted Pack of 3 Pre-packed British Made Conforms to BS132/ASTA approved

Neatly and securely holds wires in place. SIZE: 7mm round COLOUR: Brown Pack of 12

Flat plate wall mounted single coaxial socket, perfect for TV or radio aerial feeds. Surface fix ROHS compliant Complete with fixing screw Pre packed

High quality connectors offer reliable, long-lasting connections. Nickel plated Used for TV aerial connectors Easy to install Female Screw type Direct replacements

Handy pack of assorted fuse wire for a variety of applications.

Neatly and securely holds wires in place. SIZE: 1.00/1.5mm round COLOUR: Grey Pack of 14 Good quality nail Weather and impact resistant

Neatly and securely holds wires in place. SIZE: 2.5mm round COLOUR: Grey Pack of 12 Good quality nail Weather and impact resistant

High quality connectors offer reliable, long-lasting connections. Nickel plated Used for TV aerial connectors Easy to install Male Screw type Direct replacements

This adaptor converts a single socket into a double socket and can be plugged into any BT line jack. White Connects 2 Uk telephones into one socket High quality double telephone adaptor Easy to install

Neatly and securely holds wires in place. BELLWIRE T+E COLOUR: White Pack of 14 Good quality nail Weather and impact resistant

Neatly and securely holds wires in place. SIZE: 4mm round COLOUR: White Pack of 18 Good quality nail Weather and impact resistant

Neatly and securely holds wires in place. SIZE: 6mm round COLOUR: White Pack of 16 Good quality nail Weather and impact resistant

Neatly and securely holds wires in place. SIZE: 7mm round COLOUR: White Pack of 14 Good quality nail Weather and impact resistant

Neatly and securely holds wires in place. SIZE: 8mm round COLOUR: White Pack of 14 Good quality nail Weather and impact resistant

Neatly and securely holds wires in place. SIZE: 1.00/1.5mm round COLOUR: White Pack of 14

Neatly and securely holds wires in place. SIZE: 2.5mm round COLOUR: White Pack of 12 Good quality nail Weather and impact resistant

Allows the power on the input port and splits equally among the output ports to split signal between two or more devices. Audio / Video / TV Male to two female connections Pre packed

This single coaxial socket from British General can be used for TV or FM aerial connections. This socket has a premium black nickel finish a sleek and slim profile and softly rounded edges to add a touch of luxury to your decor.

Screw terminals

Easy to install, supplied with fixing screws and installation instructions

Used for TV or FM coaxial aerial connection

Sleek and slim premium metal with softly rounded edges

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS3041 and BS5733

This single coaxial socket from British General can be used for TV or FM aerial connections. This socket has a premium brushed steel finish with anti-fingerprint lacquer a sleek and slim profile and softly rounded edges to add a touch of luxury to your decor.

Screw terminals

Easy to install, supplied with fixing screws and installation instructions

Used for TV or FM coaxial aerial connection

Sleek and slim premium metal with softly rounded edges

Moisture control gasket, prevents tarnishing from new plaster

Anti-fingerprint lacquer reduces unsightly fingerprints

Minimum mounting box depth 25mm

Certified to BS3041 and BS5733

This single coaxial socket from British General can be used for TV or FM aerial connections. This socket has a premium polished chrome finish a sleek and slim profile and softly rounded edges to add a touch of luxury to your decor.

Screw terminals

Easy to install, supplied with fixing screws and installation instructions

Used for TV or FM coaxial aerial connection

Sleek and slim premium metal with softly rounded edges

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS3041 and BS5733

This 900 series white moulded single co-axial socket from British General can be used for TV or FM aerial connections. Its moulded white front-plate has a high resistance to fading, discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Finished with classic square edges and screw caps for a sleek appearance.

Screw terminal

Easy to install, supplied with fixing screws and installation instructions

Used for TV or FM co-axial aerial connection

Screw covers for sleek appearance

Minimum mounting box depth 25mm

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases, including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS3041 and BS5733

This 900 series white moulded 45A flex outlet plate from British General has cable entry at the lower edge with removable reducer and reversible cord-grip. Ideal for wiring cookers and ovens under a unit or worktop where the isolator is located elsewhere. The outlet plate has a high resistance to fading, discolouration and scratches, with anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed captive screws for ease of installation, and finished with classic square edges and screw caps for a sleek appearance.

45A Rated

Easy to install supplied with fixing screws and installation instructions

Ideal for cookers and ovens

cable entry slot at the lower edge of the faceplate

Reversible cord grip and removable reducer to accommodate different flex sizes

In-line terminals with captive screws provide easy access for quick installation

Screw covers for sleek appearance

Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection Ref. BS 7671:2008

Minimum mounting box depth 47mm

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

This 900 series white moulded double blank plate from British General is ideal for safely covering unused electrical connections. This plate has a high resistance to fading discolouration and scratches, with anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed with classic square edges and screw caps for a sleek appearance.

Ideal for safely covering unused electrical connections

Easy to install, supplied with fixing screws and installation instructions

Suitable for use with double boxes

Screw covers for sleek appearance

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases, including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

ASTA Licence number 1020

This double dry lining box is ideal for mounting electrics into dryline cavity walls partitions and plasterboard walls. The PVC box is 35mm deep, chemical resistant and has a 25mm circular knockout in the base. Quick and easy to install, suitable for everyday use in commercial and industrial environments.

Quick and easy to install

Suitable for mounting electrics into dryline cavity walls, partitions and plasterboard walls

Manufactured from PVC

Chemical resistant

Compatible with double plate accessories

Circular base knockout size = 25mm

Suitable for everyday use in commercial and industrial environments.

Mounting box depth: 35mm

This double dry lining box is ideal for mounting electrics into dryline cavity walls partitions and plasterboard walls. The PVC box is 47mm deep, chemical resistant and has a 25mm circular knockout in the base. Quick and easy to install, suitable for everyday use in commercial and industrial environments.

Quick and easy to install

Suitable for mounting electrics into dryline cavity walls, partitions and plasterboard walls

Manufactured from PVC

Chemical resistant

Compatible with double plate accessories

Circular base knockout size = 25mm

Suitable for everyday use in commercial and industrial environments.

Mounting box depth: 47mm

This 45A double pole ceiling switch from British General has an LED and mechanical on/off indicator and comes supplied with 1.8m of cord. Ideal for safe electrical isolation of shower units in bathrooms.

Easy to install, supplied with fixing screws and installation instructions

Suitable for safe electrical isolation of shower units.

Supplied with approximately 1.5 metres of cord

Earth terminal in base

Choice of cable entries

LED and mechanical indicators

Double pole switch for peace of mind of safer electrical installation

This Nexus 800 series white moulded 13A double switched socket from British General is double pole for additional safety and has a high resistance to fading, discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed with angled in-line terminals and captive screws for ease of installation, and finished with softly rounded edges and screw caps for a sleek appearance.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Angled in-line terminals with captive screws provide easy access for quick installation

Screw covers for sleek appearance

Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection Ref. BS 7671:2008

Double pole switching for the peace of mind of a safer installation

Minimum mounting box depth 25mm

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases, including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS1363-2

ASTA Licence number 1013

This black nickel finish 13A double switched socket from British General has a sleek and slim profile with softly rounded edges and no visible plastic around the switches to add a touch of luxury to your decor. This socket has been designed with angled in line colour coded terminals and backed out captive screws for ease of installation, and fits a 25mm back box making it an ideal retro-fit replacement for existing sockets.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Angled, colour coded in-line terminals provide easy access for quick installation

Twin earth fitted as standard for high integrity circuits

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switch

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

This brushed steel finish 13A double switched socket from British General has a sleek and slim profile with softly rounded edges, anti-fingerprint lacquer and no visible plastic around the switches for a luxurious finish. This socket has been designed with angled in line colour coded terminals and backed out captive screws for ease of installation, and fits a 25mm back box making it an ideal retro-fit replacement for existing sockets.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Angled, colour coded in-line terminals provide easy access for quick installation

Twin earth fitted as standard for high integrity circuits

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switch

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Grey insert

This polished chrome finish 13A double switched socket from British General has a sleek and slim profile, with softly rounded edges and no visible plastic around the switch to add a touch of luxury to your decor. This socket has been designed with angled in line colour coded terminals and backed out captive screws for ease of installation, and fits a 25mm back box making it an ideal retro-fit replacement for existing sockets.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Angled, colour coded in-line terminals provide easy access for quick installation

Twin earth fitted as standard for high integrity circuits

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switch

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

White insert

This Nexus 800 series white moulded 13A double socket from British General comes with two USB charging ports allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. Its moulded white front-plate has a high resistance to fading, discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. With its rounded edge finish, the white moulded wall plate will seamlessly fit with any style or décor in your home, and fits a 25mm backbox, ideal for retro-fit.

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled in-line colour coded terminals with captive screws provide easy access for quick installation

Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection Ref. BS 7671:2009

Minimum mounting box depth 25mm

Certified to BS1363-2:2016

ASTA Licence number 1182

This 13A double power socket from British General comes with two USB charging ports allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. The Nexus Metal range has a sleek and slim profile with softly rounded edges and a black nickel finish to add a touch of luxury to your decor.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - Ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled colour coded terminals for easy identification and captive screws to prevent screw loss

Sleek and slim premium metal with softly rounded edges

Moisture control gasket prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS 5733 and BS EN 60930

This 13A double power socket from British General comes with two USB charging ports, allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. The Nexus Metal range has a sleek and slim profile with softly rounded edges and a brushed steel finish with anti-fingerprint lacquer to add a touch of luxury to your decor.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - Ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled colour coded terminals for easy identification and captive screws to prevent screw loss

Sleek and slim premium metal with softly rounded edges

Moisture control gasket prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS 5733 and BS EN 60930

This 13A double power socket from British General comes with two USB charging ports, allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. The Nexus Metal range has a sleek and slim profile with softly rounded edges and a polished chrome finish to add a touch of luxury to your decor.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - Ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled colour coded terminals for easy identification and captive screws to prevent screw loss

Sleek and slim premium metal with softly rounded edges

Moisture control gasket prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS 5733 and BS EN 60930

This double steel back box is ideal for the installation of electrical accessories and is designed to be fitted into a wall cavity for a flush to wall fitting. The 25mm depth is ideal for use with 13A sockets and 20A double pole switches.

Easy to fit

Manufactured from steel

Suitable for installation of double electrical accessories

2 fixing lugs

M20 knockouts in sides and base

Complete with earth bond terminal

25mm deep

This double steel back box is ideal for the installation of electrical accessories and is designed to be fitted into a wall cavity for a flush to wall fitting. The 35mm depth is ideal for use with fused connection units and other accessories that require a slightly deeper back box.

Easy to fit

Manufactured from steel

Suitable for installation of double electrical accessories

2 fixing lugs

M20 knockouts in sides and base

Complete with earth bond terminal

35mm deep

This double steel back box is ideal for the installation of electrical accessories and is designed to be fitted into a wall cavity for a flush to wall fitting. The 47mm depth is ideal for use with 45A double pole switches and cooker outlets that require a deeper back box.

Easy to fit

Manufactured from steel

Suitable for installation of double electrical accessories

2 fixing lugs

M20 knockouts in sides and base

Complete with earth bond terminal

47mm deep

This 900 series white moulded dual surface mounting box from British General is ideal for installing 2 single electrical outlets without the need to remove material from the wall. This box has classic square edges multiple knockouts for versatility, and an earth terminal fitted as standard. Ideal for use with electrical accessories from the BG 900 series range.

37mm Deep

Easy to install supplied with fixing screws and installation instructions

Rectangular pattress box for 2 electrical outlets

Multiple knock-outs

Earth terminal fitted as standard

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

ASTA Licence number 1020

This 900 series white moulded double surface mounting box from British General is ideal for installing power points without the need to remove material from the wall. This box has classic square edges multiple knockouts for versatility, and an earth terminal fitted as standard. Ideal for use with electrical accessories from the BG 900 series range.

32mm Deep

Easy to install supplied with fixing screws and installation instructions

Square pattress box for double outlets

Multiple knock-outs

Earth terminal fitted as standard

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

ASTA Licence number 1020

This Nexus 800 series white moulded 45A cooker control unit from British General includes a 13A socket for an additional appliance outlet and has flush LED indicators above the socket and switch. Its moulded white front-plate has a high resistance to fading, discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed with captive screws for ease of installation, and finished with softly rounded edges and screw caps for a sleek appearance.

45A and 13A Rated

Easy to install supplied with fixing screws and installation instructions

13A socket for additional appliance outlet

Double Pole switching for the peace of mind of a safer installation

Screw covers for sleek appearance

LED power Indicator reliable and low power

Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection Ref. BS 7671:2008

Minimum mounting box depth 47mm

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

This Nexus 800 series white moulded 45A double pole switch with indicator from British General is ideal for use with cookers and has a large mounting plate measuring 146mm high x 86mm wide. Its moulded white front-plate has a high resistance to fading discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed with colour coded terminals and captive screws for ease of installation, and finished with soft rounded edges and screw caps for a premium appearance.

45A Rated

Easy to install supplied with fixing screws and installation instructions

Angled colour coded terminals with captive screws provide easy access for quick installation

Screw covers for sleek appearance

LED power Indicator reliable and low power

Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection Ref. BS 7671:2008

Double Pole switching for the peace of mind of a safer installation

Minimum mounting box depth 47mm

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

ASTA Licence number 1012

This dual steel back box is ideal for the installation of electrical accessories and is designed to fit two single accessories side by side and to be fitted into a wall cavity for a flush to wall fitting. The 35mm depth is ideal for use with fused connection units and other accessories that require a slightly deeper back box.

Easy to fit

Manufactured from steel

Suitable for installation of 2 x single electrical accessories side by side

4 fixing lugs

M20 knockouts in sides and base

Complete with earth bond terminal

35mm deep

This Nexus 800 series white moulded 10A triple pole fan isolator from British General provides a safe and simple method of isolating mechanical fan units. Its moulded white front-plate has a high resistance to fading discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Finished with soft rounded edges and screw caps for a sleek appearance.

10A 10AX Rated

Easy to install, supplied with fixing screws and installation instructions

The Fan Isolator switch has a triple pole switching design, however can be used for double pole applications if required

Captive screws prevent screw loss

Screw covers for sleek appearance

Minimum mounting box depth: 16mm

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases, including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS60669-1

ASTA Licence number 1015

This 900 series white moulded 25A flex outlet plate from British General has cable entry at the lower edge with removable reducer and reversible cord-grip. Ideal for wiring fixed appliances such as fridges and water heaters under a unit or worktop where the isolator is located elsewhere. The outlet plate has a high resistance to fading, discolouration and scratches, with anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed captive screws for ease of installation, and finished with classic square edges and screw caps for a sleek appearance.

25A Rated

Easy to install supplied with fixing screws and installation instructions

Suitable for the connection of refrigerators water heaters, central heating and other fixed appliances

cable entry slot at the lower edge of the faceplate

Reversible cord grip and removable reducer to accommodate different flex sizes

Terminals have 2 cable apertures and screws for individual cables for ease of wiring

Screw covers for sleek appearance

Minimum mounting box depth 25mm

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

This Nexus 800 series white moulded 13A fused and unswitched connection unit with indicator from British General provides an outlet from the mains containing the fuse ideal for spur circuits and hardwired appliances. Its moulded white front-plate has a high resistance to fading, discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Finished with softly rounded edges and screw caps for a sleek appearance.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Ideal for spur circuits and hard wired power appliances

Angled colour coded terminals with captive screws provide easy access for quick installation

LED power Indicator reliable and low power

Screw covers for sleek appearance

Minimum mounting box depth 25mm

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 1363 Part 4

ASTA Licence number 1015

Outdoor sockets are an ideal option for managing outdoor or garden appliances and can be installed in gardens and patios, as well as in shed’s, outhouses and garages. This 13A double unswitched outdoor power socket from British General is IP55 rated with the cover closed, has 20mm and 25mm knock-outs in the supplied mounting box and fixing centres with horizontal and vertical adjustment.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

IP55 rated with cover closed

20mm and 25mm knock-outs in the supplied mounting box

Adjustable horizontal and vertical fixing centres

Minimum mounting box depth: 25mm

Angled colour coded terminals with captive screws

Durable see through cover

Suitable for installation in outdoor locations, garages and sheds

Twin earth fitted as standard for high integrity circuits

Outdoor switches are an ideal option for operating outdoor lighting or garden appliances. This 20A 16AX double switch from British General is housed in an IP55 rated weatherproof protective case which has multiple knockouts and fixing centres with horizontal and vertical adjustment for versatility. Suitable for installation in outdoor locations garages and sheds.

20A 16AX Rated

Easy to install, supplied with fixing screws and installation instructions

IP55 rated with the cover closed

4 x M20 cut-outs(1 each side), 1 x M25 cut-out on rear with sealant ring

Suitable for installation in outdoor locations, garages and sheds

Fixing centres with horizontal and vertical adjustment

Clearly marked terminals with backed out captive screws for easy installation

Outdoor switches are an ideal option for operating outdoor lighting or garden appliances. This 20A 16AX single switch from British General is housed in an IP55 rated weatherproof protective case which has multiple knockouts and fixing centres with horizontal and vertical adjustment for versatility. Suitable for installation in outdoor locations garages and sheds.

20A 16AX Rated

Easy to install, supplied with fixing screws and installation instructions

IP55 rated with the cover closed

4 x M20 cut-outs(1 each side), 1 x M25 cut-out on rear with sealant ring

Suitable for installation in outdoor locations, garages and sheds

Fixing centres with horizontal and vertical adjustment

Clearly marked terminals with backed out captive screws for easy installation

Outdoor sockets are an ideal option for managing outdoor or garden appliances and can be installed in gardens and patios, as well as in shed’s, outhouses and garages. This 13A single unswitched outdoor power socket from British General is IP55 rated with the cover closed, has 20mm and 25mm knock-outs in the supplied mounting box and fixing centres with horizontal and vertical adjustment.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

IP55 rated with cover closed

20mm and 25mm knock-outs in the supplied mounting box

Adjustable horizontal and vertical fixing centres

Minimum mounting box depth: 25mm

Angled colour coded terminals with captive screws

Durable see through cover

Suitable for installation in outdoor locations, garages and sheds

Twin earth fitted as standard for high integrity circuits

This easy to install outdoor power kit is IP66 Rated and ideal for temporary installations. Designed to protect against water and dust ingress in the most arduous of conditions, Outdoor sockets are an ideal option for managing outdoor or garden appliances, providing protection from the impact of water and dust. This kit includes a pre-wired double 13A socket and easy to wire RCD plug.

Weather and dust protection - IP66 (with cover closed)

Fast fix - no separate screws, no screw covers, 150º rotation

For temporary installation only

3m cable with prepared wires to plug

Pre-wired 13A switched socket

Easy to wire RCD plug, non-latching, 30mA trip current, 40ms trip

Patented cable entry - prevents accidental opening

Double pole switching for the peace of mind of a safer installation

Large open/closer paddles for easier operation

Multiple knockouts for versatility when installing - 8 x 20mm

Made to safeguard from moisture, this IP66 rated junction box will provide a weatherproof connection point outside. With a 5 pole terminal block, earth terminal and multiple knockouts, this junction box is ideal for outdoor electricals and for garden patio lights.

Weather and dust protection - IP66 (with cover closed)

Fast fix - no separate screws no screw covers, 150º rotation

Robust construction - high impact polycarbonate housing

5-pole terminal block

Ideal for outdoor lighting and power supplies

Multiple knockouts for versatility when installing - 5 x 20mm

Earth terminal in mounting box

Max load 57A

Outdoor switches are ideal for managing outdoor lighting or garden appliances. This robust 20A weatherproof single switch is IP66 rated, and has a LED indicator that can be wired to illuminate when on or off, whilst the 2 way switching allows a second switch to be added to the circuit to operate the same light or appliance from another location. The wide rocker makes this easy to use in all weather, and all cable entries in the 4 sides of the mounting box have removable blanking caps for versatility.

Weather and dust protection - IP66

Easy to install, supplied with fixing screws and installation instructions

Robust and high impact outdoor power switch, for safe electricity supply outdoors

2 way switching allows for a second switch position in a circuit

LED indicator that can be wired to illuminate when off or on

All cable entries in the 4 sides of the mounting box have removable blanking caps

Fast fix - no separate screws, no screw covers, 150º rotation

Clearly marked terminals with backed out captive screws for easy installation

Earth terminal in mounting box

Outdoor switches are ideal for managing outdoor lighting or garden appliances. This robust 20A weatherproof double switch is IP66 rated, and has a LED indicator that can be wired to illuminate when on or off, whilst the 2 way switching allows a second switch to be added to the circuit to operate the same light or appliance from another location. The wide rocker makes this easy to use in all weather, and all cable entries in the 4 sides of the mounting box have removable blanking caps for versatility.

Weather and dust protection - IP66

Easy to install, supplied with fixing screws and installation instructions

Robust and high impact outdoor power switch, for safe electricity supply outdoors

2 way switching allows for a second switch position in a circuit

LED indicator that can be wired to illuminate when off or on

Multiple knockouts for versatility when installing - 5 x 20mm

Fast fix - no separate screws, no screw covers, 150º rotation

Clearly marked terminals with backed out captive screws for easy installation

Earth terminal in mounting box

white 4 way 20A junction box has a 2.5"/64mm diameter and knockout entries, and is primarily used to extend power and lighting circuits. This can also be used to repair damaged cables, preventing a full re-wiring of the circuit.
BG Electrical are confident in the quality of our workmanship and materials, the guarantee stated applies from the date of delivery. Please see our terms and conditions for more details

Junction box with cable entries in the side wall that are selectable by alignment of symbols and text on the cover

Slotted terminals allowing for unbroken ring wiring

Robust generous capacity slot terminals with large grub screws

Small and unobtrusive

4 knockouts in side wall

Captive cover fixing screw

Moulded in white urea

2.5/57mm diameter

This white 3 way 30A selective entry junction box has a 3.5/89mm diameter base and is primarily used to extend power and lighting circuits. The 4 selective entries in the side wall with knockouts will allow the apertures to be enlarged if required. This junction box can also be used to repair damaged cables preventing a full re-wiring of the circuit.

Junction box with cable entries in the side wall that are selectable by alignment of symbols and text on the cover

4 selective entries in side wall with knockouts allowing for apertures to be enlarged

4 knockouts in the base to facilitate ease of wiring

Slotted terminals allowing for unbroken ring wiring

Lower lip of entries can easily be knocked out to take twin cables

Robust generous capacity slot terminals with large grub screws

Captive cover fixing screw

Moulded in white urea

This robust lamp holder for B22 bayonet light bulbs from British General has a cord grip to stop any pulling of the flex to ensure the wires are not pulled out of the terminals. Supplied with a short skirt to hold the lamp shade in place.

Easy to install

Moulded in robust fully insulating plastic

Positive cord-grip protects the integrity of wiring

Short skirt holds the lampshade in place

Heat resistant T2 rated lamp holder

Suitable for use with B22 bayonet cap bulbs

This Metal Clad 13A double switched socket from British General is made from a rugged scratch resistant heavy gauge steel and has multiple knock outs for versatility. This socket has twin earth for high integrity circuits and colour coded terminals with backed out captive screws for ease of installation. An ideal solution for commercial and industrial environments.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Multiple knock out metal box for versatility

Durable scratch resistant epoxy powder coated finish

No visible plastic around switch

Ideal for commercial and industrial environments

Colour coded terminals for easy identification

Captive screws prevent screw loss

Twin earth fitted as standard for high integrity circuits

White insert

This Metal Clad 13A single switched socket from British General is made from a rugged scratch resistant heavy gauge steel and has multiple knock outs for versatility. This socket has twin earth for high integrity circuits and colour coded terminals with backed out captive screws for ease of installation. An ideal solution for commercial and industrial environments.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Multiple knock out metal box for versatility

Durable scratch resistant epoxy powder coated finish

No visible plastic around switch

Ideal for commercial and industrial environments

Colour coded terminals for easy identification

Captive screws prevent screw loss

Twin earth fitted as standard for high integrity circuits

White insert

These white 7mm round cable clips come in a pack of 50pcs, and are ideal for the fast installation of cables. Made from impact resistant UV stabilised polypropylene with integrated hardened zinc coated safety nails, these clips are suitable for use on wood, masonry and compressed board, and can withstand high impact together with extremes of heat, cold and acid.

For fast installations of cables

Suitable for use wood, masonry and compressed board

White Colour

Manufactured from strong, impact resistant polypropylene

Each clip includes integrated zinc coated nail

Safety nail bends before breaking

Operating Temperature: -40°C to +80°C

This Nexus 800 series white moulded dual voltage shaver socket from British General is suitable for use with 240V and 115V shavers and electric toothbrushes.\nIts moulded white front-plate has a high resistance to fading discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases.\nDesigned with captive screws for ease of installation, and finished with softly rounded edges and screw caps for a sleek appearance.

This dual voltage shaver socket from British General is suitable for use with 240V and 115V shavers and electric toothbrushes. The socket has a brushed steel finish with anti-fingerprint lacquer and a sleek and slim profile with softly rounded edges to add a touch of luxury to your decor.

Dual volt 115 / 240 V

Easy to install, supplied with fixing screws and installation instructions

Suitable for shavers and electric toothbrushes

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

Sleek and slim premium metal with softly rounded edges

Grey insert

Minimum mounting box depth 47mm

Certified to BS EN 61558-1 and BS EN 61558-2-5

This dual voltage shaver socket from British General is suitable for use with 240V and 115V shavers and electric toothbrushes. \nThe socket has a polished chrome finish and a sleek and slim profile with softly rounded edges to add a touch of luxury to your decor.

Dual volt 115 / 240 V

Easy to install, supplied with fixing screws and installation instructions

Suitable for shavers and electric toothbrushes

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

Sleek and slim premium metal with softly rounded edges

White insert

Minimum mounting box depth 47mm

Certified to BS EN 61558-1 and BS EN 61558-2-5