Faithfull Tools

The Faithfull Flat Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. Manufactured from high-quality steel.

This Faithfull high-quality Foam (Spurt) Gun is designed for use with standard 500/750ml gun grade Polyurethane pressurised expanding foam canisters.

The gun has a sprung trigger mechanism and flow adjuster knob to ensure fine control over the foam output, and to provide a clean, even bead for the accurate installation of the foam which helps to reduce waste. The barrel is hermetically sealed once the trigger has been released to prevent the hardening of the foam when left in the gun.

The Foam Gun has non-stick coated needle and canisters fitting valve and a stainless steel barrel to help make cleaning the gun easier. It is supplied complete with two types of additional plastic extension barrels to give better access when used in certain applications.

Ideal for the following applications:
Installation of door and window frames.
Filling and sealing of cavities and joints.
Pipe or cable penetrations in walls.
Sealing joints in wall insulation sheets.

Supplied with:
2 x Long plastic extension barrels.
2 x Short plastic narrow access barrels.

The Faithfull 5 Piece Forstner Bit Set, used for drilling in woodworking in preference to drill bits and flat bits whenever a very clean and precise hole is required. They also enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole is required. Supplied in an aluminium storage case.

Sizes: 15, 20, 25, 30 and 35mm.

Shank Size: 8mm.

The Faithfull unvarnished Hand Scrubbing Brush has stiff, short bristles, is ideal for general cleaning and for removing stubborn marks on most surfaces.

Faithfull Replacement Pick Handle to fit standard pick axe or mattock eye. Made from straight grained hardwood with a waxed finish.

Made to BS 3823 BW/BR British Standard specification which governs density, moisture content, grain, twist, knotting, finish, and staining, etc.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions:
Size: 26mm diameter x 60mm long x 8mm shank.