Faithfull Tools

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 6mm. Working Length: 52mm. Overall Length: 92mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 8mm. Working Length: 75mm. Overall Length: 120mm.

A range of straight wooden broom handles supplied in a variety of lengths and diameters to fit most broom heads. Length: 1525 cm (60in) Diameter: 28 mm (1.1/8in) Fits the following Faithfull brooms: FAIBRBC13FL - BASSINE FLAT 325mm FAIBRBC13SA - BASSINE SADDLEBACK 325mm FAIBRPVC13FL - PVC FLAT 325mm FAIBRPVC13SA - PVC SADDLEBACK 325mm FAIBRSQUE18 - SQUEEGEE 450mm FAIBRSQUE24 - SQUEEGEE 600mm

Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.

Faithfull Lightweight Aviation Tinsnips manufactured to a high specification which includes a safety locking latch, strong opening spring and slip guards for protection on each handle. Designed to cut up to 1. 2mm sheet steel, non-ferrous material, vinyls, plastic and rubber. Formed blades in satin finish are serrated to prevent sheet metal slipping. Specification Length: 250mm (10in). Cutting Capacity: Sheet Steel: 1.2mm. These Faithfull ;Compound Aviation Snips ;have the following specification: Cut Type: Straight. Length: 250mm (10in). Cutting Capacity: Sheet Steel: 1.2mm.

Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions.