John Guest

Quickly and securely connects equally sized pipe to form a 90° pipe bend JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. Features and benefits • 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) • Maintains structural integrity of the pipe connection • Helps make the pipe more rigid when a side load is applied • Suitable for hot and cold water and central heating systems • Suitable for Speedfit pipes and fittings only

Quickly and securely connects equally sized pipe to form a 90° pipe bend JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems