Nails

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

Suitable for standard number 1, 2 or 3 picture hooks. Not suitable for use in hard wall surfaces

Extremely tough pins Can be used by themselves or with picture hooks. Suitable for use in normal and plasterboard walls or wooden beams.

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish. • 20° collation angle • T Head to give a concealed fixing • Shank Design: Low penetration resistance into all materials

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish. • 20° collation angle • T Head to give a concealed fixing • Shank Design: Low penetration resistance into all materials

34° collation angle
Diamond point for maximum penetration
Clipped head to increase the number of nails per strip and therefore reduce tool loading times
Suitable for indoor and covered outdoor applications
Conforms to Eurocode 5 and Service Class 2
Ring shank type
Substrates: Timber Structure
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Nails Per Strip: 44
Collation Angle: 34°
Point Type: Diamond
Fuel Cell Quantity: 3
Fuel Cell Volume ml: 80
Service Class: 2
Shank Type: Ring
CE Standard Web: BS EN 14592:2008
Shank Dia. mm: 2.8
Eurocode: 5
Thread Length mm: 37.1
Type: Trade Pack
First Fix

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor applications • Conforms to Eurocode 5 and Service Class 1 • Ring shank type

34° collation angle
Diamond point for maximum penetration
Clipped head to increase the number of nails per strip and therefore reduce tool loading times
Suitable for indoor and covered outdoor applications
Conforms to Eurocode 5 and Service Class 2
Ring shank type
Substrates: Timber Structure
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Nails Per Strip: 44
Collation Angle: 34°
Point Type: Diamond
Fuel Cell Quantity: 3
Fuel Cell Volume ml: 80
Service Class: 2
Shank Type: Ring
CE Standard Web: BS EN 14592:2008
Shank Dia. mm: 3.1
Eurocode: 5
Thread Length mm: 43.9
Type: Trade Pack
First Fix

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor applications • Conforms to Eurocode 5 and Service Class 1 • Plain shank type

34° collation angle
Diamond point for maximum penetration
Clipped head to increase the number of nails per strip and therefore reduce tool loading times
Suitable for indoor and covered outdoor applications
Conforms to Eurocode 5 and Service Class 2
Part ring shank type
Substrates: Timber Structure
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Nails Per Strip: 44
Collation Angle: 34°
Point Type: Diamond
Service Class: 2
Shank Type: Part Ring
CE Standard Web: BS EN 14592:2008
Shank Dia. mm: 3.1
Eurocode: 5
Thread Length mm: 40.8
Type: Trade Pack
First Fix

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor applications • Conforms to Eurocode 5 and Service Class 1 • Ring shank type

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor applications • Conforms to Eurocode 5 and Service Class 1 • Ring shank type

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor applications • Conforms to Eurocode 5 and Service Class 1 • Ring shank type

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish. • Straight collation • T Head to give a concealed fixing • Shank Design: Low penetration resistance into all materials

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish. • Straight collation • T Head to give a concealed fixing • Shank Design: Low penetration resistance into all materials

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 440 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 50 Size mm: 50 x 2.65 Weight kg: 25 Type: Round Wire

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 65 Size mm: 65 x 2.65 Weight kg: 0.5 Type: Round Wire

"38mm Electro Galvanised Angled Brads. The stronger, stiffer 16 gauge nail ensures consistent drivability. 17 gauge size creates smaller hole to provide excellent finishing."

"3.1 x 63mm Galv-Plus® Ring Shank Nail. Paslode nailing system provides the highest level of safety & local technical support. Paslode provides a suitable nail for every application. Service Class 2 - Indoors, Not Heated, Outdoors Protected. Best driveability coating for increased driveability. Paslode nails are CE marked & EC5 compliant."

"3.1 x 90mm Galv-Plus® Smooth Nail. Paslode nailing system provides the highest level of safety & local technical support. Paslode provides a suitable nail for every application. Service Class 2 - Indoors, Not Heated, Outdoors Protected. Best driveability coating for increased driveability. Paslode nails are CE marked & EC5 compliant."

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 1100 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 38 Size mm: 38 x 3.35 Weight kg: 1 Type: Clout

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 620 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 65 Size mm: 65 x 3.35 Weight kg: 1 Type: Clout

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 2.36 Approx. Pcs Per 1kg: 750 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 40 Size mm: 40 x 2.36 Weight kg: 1 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 2.36 Approx. Pcs Per 1kg: 750 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 40 Size mm: 40 x 2.36 Weight kg: 2.5 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 440 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 50 Size mm: 50 x 2.65 Weight kg: 1 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 230 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 1 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 230 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 2.5 Type: Annular Ringshank

Oval head for a concealed finish. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Approx. Pcs Per 1kg: 940 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 40 Size mm: 40 Weight kg: 1 Type: Oval

Oval head for a concealed finish. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Approx. Pcs Per 1kg: 470 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 50 Size mm: 50 Weight kg: 1 Type: Oval

A light weight nail, commonly used for cabinet making and light duty applications. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Shank Dia. mm: 1.6 Approx. Pcs Per 1kg: 2340 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 25 Size mm: 25 x 1.60 Weight kg: 1 Type: Panel Pin

A light weight nail, commonly used for cabinet making and light duty applications. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Shank Dia. mm: 1.6 Approx. Pcs Per 1kg: 1590 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 40 Size mm: 40 x 1.60 Weight kg: 0.5 Type: Panel Pin

A light weight nail, commonly used for cabinet making and light duty applications. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Shank Dia. mm: 2 Approx. Pcs Per 1kg: 770 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 50 Size mm: 50 x 2.00 Weight kg: 0.5 Type: Panel Pin

The head can be punched below the surface for a concealed finish. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 240 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 1 Type: Round Lost Head

The head can be punched below the surface for a concealed finish. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 240 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 2.5 Type: Round Lost Head

The head can be punched below the surface for a concealed finish. Bright nails are self coloured and have no plating. Suitable for indoor applications. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 240 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 0.5 Type: Round Lost Head

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 380 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 30 Size mm: 30 x 3.35 Weight kg: 2.5 Type: Clout

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 380 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 30 Size mm: 30 x 3.35 Weight kg: 0.5 Type: Clout

For fixing fibre cement slates. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 1.5 Head Dia. mm: 20 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Fibre Cement Slates Length mm: 20 Size mm: 20 x 1.50 Type: Disc Rivet

For fixing corrugated sheeting. The twisted shank gives an enhanced pull-out resistance. Commonly used in roofing applications. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 140 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 65 Size mm: 65 x 3.35 Weight kg: 1 Type: Spring Head

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 580 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 20 Size mm: 20 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 420 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 30 Size mm: 30 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 40 Size mm: 40 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 320 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 50 Size mm: 50 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

General use with full round head for clamping. • For medium duty rust protection • Conforms to Eurocode 5 and service class 2

General use with full round head for clamping. • For medium duty rust protection • Conforms to Eurocode 5 and service class 2

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 6 Approx. Pcs Per 1kg: 29 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 150 Size mm: 150 x 6.00 Weight kg: 1 Type: Round Wire

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 575 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 40 Size mm: 40 x 2.65 Weight kg: 1 Type: Round Wire

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 440 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 50 Size mm: 50 x 2.65 Weight kg: 1 Type: Round Wire

General use with full round head for clamping. • For medium duty rust protection • Conforms to Eurocode 5 and service class 2

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 65 Size mm: 65 x 2.65 Weight kg: 1 Type: Round Wire

General use with full round head for clamping. • For medium duty rust protection • Conforms to Eurocode 5 and service class 2

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3.75 Approx. Pcs Per 1kg: 154 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 75 Size mm: 75 x 3.75 Weight kg: 1 Type: Round Wire

General use with full round head for clamping. • For medium duty rust protection • Conforms to Eurocode 5 and service class 2

For use with all types of builders metal work. The twisted shank gives an enhanced pull-out resistance. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3.75 Approx. Pcs Per 1kg: 357 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Metal Length mm: 30 Size mm: 30 x 3.75 Weight kg: 1 Type: Square Twist

For use with all types of builders metal work. The twisted shank gives an enhanced pull-out resistance. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3.75 Approx. Pcs Per 1kg: 357 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Metal Length mm: 30 Size mm: 30 x 3.75 Weight kg: 2.5 Type: Square Twist

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 780 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 13 Size mm: 13 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 580 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 20 Size mm: 20 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 420 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 30 Size mm: 30 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 40 Size mm: 40 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 25 Size mm: 25 x 2.50 Weight kg: 0.1 Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 30 Size mm: 30 x 2.50 Weight kg: 0.1 Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 30 Size mm: 30 x 2.50 Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 40 Size mm: 40 x 2.50 Weight kg: 0.1 Type: Masonry

Used for fixing fencing and wire mesh. For medium duty rust protection. TECHNICAL DATA: Shank Dia. mm: 2 Approx. Pcs Per 1kg: 1000 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Wood Length mm: 20 Size mm: 20 x 2.00 Weight kg: 1 Type: Presser Point Staple

Used for fixing fencing and wire mesh. For medium duty rust protection. TECHNICAL DATA: Shank Dia. mm: 4 Approx. Pcs Per 1kg: 135 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Wood Length mm: 40 Size mm: 40 x 4.00 Weight kg: 1 Type: Presser Point Staple

A light weight nail, commonly used for cabinet making and light duty applications. For medium duty rust protection. TECHNICAL DATA: Shank Dia. mm: 1.6 Approx. Pcs Per 1kg: 1590 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 40 Size mm: 40 x 1.60 Weight kg: 0.5 Type: Panel Pin