Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Plumbing & Heating
Brett Martin 21.5mm Straight Compression Socket Tank Connector - White Polar
50117
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£3.00
Brett Martin 21.5mm Bent Compression Socket Tank Connector - White
50116
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£3.00
Brett Martin 50mm / 32mm Solvent Socket Reducer - Black
20009
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£3.03
Brett Martin 50mm / 32mm Solvent Socket Reducer - White
20002
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£3.03
TIMCO Sanitary Fixing Kit for Pan/Bidet 6mm x 80mm Hex Head Screw BZP
28009
Designed for floor fixing pan/bidets into a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Flat caps for a concealed finish. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Pan/Bidet Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Pan/Bidet Fixings
£3.21
Speedfit Reducing Straight Connector 15 × 10MM
48001
JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£3.22
Speedfit Brass Male Coupler 22mm × 3⁄4″ BSP
48044
A durable brass adaptor for connecting Metric to FBSP type fittings
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection and durable male thread
• Safe flame-free installation, with no hot works, glue or flux
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection and durable male thread
• Safe flame-free installation, with no hot works, glue or flux
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£3.31
Speedfit Equal Elbow 15MM
48015
Quickly and securely connects equally sized pipe to form a 90° pipe bend
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£3.34
Brett Martin 50mm / 40mm Solvent Socket Reducer - Black
21008
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£3.35
Speedfit Tank Connector 22mm
48012
Directly connects a tank to a mains supply simply and securely
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only
£3.46
Talon Snappit Radiator Snap 15 x 200mm Chrome Effect
11012
**Sold Individually**
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
£3.46
Speedfit Stop End 10mm
48007
Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£3.70
Speedfit Stop End 15mm
48019
Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£3.79
Speedfit Straight Connector 10MM
48009
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£3.79
Brett Martin 40mm x 2½° Angled Solvent Waste Adaptor - Grey
20028
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£3.81
Brett Martin 40mm x 2½° Angled Waste Adaptor - White
20019
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.00
Brett Martin 40mm x 2½° Angled Waste Adaptor - Black
20026
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.00
Brett Martin 40mm x 2½° Angled Waste Adaptor - Grey
20027
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.00
Brett Martin 32mm x 2½° Angled Waste Adaptor - Grey
19024
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.00
Brett Martin 32mm x 2½° Angled Waste Adaptor - Black
19014
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£4.00
Brett Martin 32mm x 2½° Angled Waste Adaptor - White
19015
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£4.00
Brett Martin 32mm Push-Fit Rubber Waste Adaptor - Black
20014
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.15
Brett Martin 40mm Push-Fit Rubber Waste Adaptor - Black
20015
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.15
Brett Martin 50mm Push-Fit Rubber Waste Adaptor - Black
20016
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.15
Speedfit Reducer 22 × 15MM
48023
Quickly and securely connects two unequal sized Speedfit fittings to reduce a line size
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
£4.22
6 Hose Clip - Zinc MSZP 110 - 140mm
M8301
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required.
The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes.
* The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions.
Screw head size: 7mm.
Size: 6.
Adjustment: 110 - 140mm.
The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes.
* The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions.
Screw head size: 7mm.
Size: 6.
Adjustment: 110 - 140mm.
£4.28
Payment options
