Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Plumbing & Heating
Corner Joint Matt Silver 40mm x 640mm
16022
Aluminium Matt Silver Trim For Corner Jointing Of All 40mm Up To 640mm Wide Worktop Installations (Rounded Front & Pre-Drilled)
£5.88
Worktop End Cap Matt Silver 30mm x 640mm
16023
Aluminium Matt Silver Trim For End Capping All 40mm Up to 640mm Wide Worktop Installations (Rounded Front & Pre-Drilled)
£5.85
TIMCO Sanitary Fixing Kit for WC & Bidet 5mm x 40mm Screw Plastic
280135
Designed to fix WC pan/bidets to a variety of solid building materials. Fully adjustable for a quick and easy installation. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Type: WC/Bidet Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Type: WC/Bidet Fixings
£5.84
Brett Martin 50mm x 92½° Solvent Cross Tee - White
21013
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.81
Skylo Bottom Entry Ball Valve
13040
The Skylo traditional bottom entry ball valve, can be used to replace cistern valves that has a similar item already. For this valve to function correctly a ball float is screwed to the threaded tail. The valve has an easy operating adjustable arm and a pivoting thread for the ball float.
Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.167 L/S
Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.167 L/S
£5.69
Speedfit Straight Tap Connector 15MM × 1⁄2″
48026
Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£5.61
Brett Martin 50mm x 90° Solvent Conversion Bend - Black
21020
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 90° Solvent Conversion Bend - White
210205
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 90° Solvent Knuckle Bend - White
21003
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 135° Solvent Obtuse Bend - White
21004
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 92½° Solvent Swept Bend - White
21005
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 90° Solvent Knuckle Bend - Black
21009
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 135° Solvent Obtuse Bend - Black
21010
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Brett Martin 50mm x 92½° Solvent Swept Bend - Black
21011
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.58
Plasson 25 x 20 Reducing Set
520305
The PLASSON WRAS approved reducing set is designed for use within compression fittings to reduce the size of MDPE water pipe.
WRAS Approved Product - will be accepted by water companies as suitable for drinking water systems.
Adapts fittings - increases flexibility of use of standard fittings and reduces fitting usage.
Connects different pipe sizes - allowing fittings to be adapted to accept smaller Metric PE pipes.
Kit of parts - fit within the fitting nut/body to save space required to install.
A reliable and durable way of jointing water supply pipes, requiring no special tools to use effectively.
WRAS Approved Product - will be accepted by water companies as suitable for drinking water systems.
Adapts fittings - increases flexibility of use of standard fittings and reduces fitting usage.
Connects different pipe sizes - allowing fittings to be adapted to accept smaller Metric PE pipes.
Kit of parts - fit within the fitting nut/body to save space required to install.
A reliable and durable way of jointing water supply pipes, requiring no special tools to use effectively.
£5.53
Speedfit Equal Elbow 22MM
48016
Quickly and securely connects equally sized pipe to form a 90° pipe bend
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£5.46
Brett Martin 50mm Solvent Straight Connector - Black
21007
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.26
Brett Martin 50mm Solvent Straight Connector - White
21001
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.26
Brett Martin 50mm / 40mm Solvent Socket Reducer - White
21002
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.26
Speedfit Equal Tee 15MM
48017
Quickly and securely connects three pipes of equal size
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£5.24
Brett Martin 50mm Solvent Expansion Coupling - White
21019
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£5.17
Croydex Mild Steel Corner Soap Dish
13082
• Screw to wall fixings
• Wall plugs and screws included
• Maximum load: 2kg
• Wall plugs and screws included
• Maximum load: 2kg
£5.10
Speedfit Stop End 22mm
48020
Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£4.97
Copper Tube 15MM - Per Metre
61043
**PLEASE NOTE 15MM, 22MM, 28MM COPPER TUBE ONLY COMES IN 1,2,3 METRE LENGTHS IF YOU ORDER OVER 3METRES YOU WILL RECEIVE 3MTR LENGTH/S PLUS THE ADDED METERAGE**
£4.90
40mm End Worktop End Cap - Matt Silver
160235
Suitable for covering raw ends of chipboard worktops.
Strong, versatile and easy to fit.
Colour: Matt Silver.
Strong, versatile and easy to fit.
Colour: Matt Silver.
£4.85
Speedfit Equal Elbow 10MM
48010
Quickly and securely connects equally sized pipe to form a 90° pipe bend
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£4.80
Straight Running Joint M/Silver 40mmx640mm
16021
Aluminium Matt Silver Trim For Straight Running Joints Of All 40mm Up To 640mm Wide Worktop Installations (Rounded Front & Pre-Drilled)
£4.77
Brett Martin 32mm Push-Fit Rubber Waste Adaptor - Black
20014
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.74
Brett Martin 40mm Push-Fit Rubber Waste Adaptor - Black
20015
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.74
Brett Martin 50mm Push-Fit Rubber Waste Adaptor - Black
20016
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.74
Skylo Side Entry Ball Valve
13039
The Skylo traditional side entry ball valve, can be used to replace cistern valves that has a similar item already. For this valve to function correctly a ball float is screwed to the threaded tail. The valve has an easy operating adjustable arm and a pivoting thread for the ball float.
Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.158 L/S
Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.158 L/S
£4.71
Brett Martin 40mm x 2½° Angled Waste Adaptor - White
20019
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.57
Brett Martin 32mm x 2½° Angled Waste Adaptor - Grey
19024
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.57
Brett Martin 32mm x 2½° Angled Waste Adaptor - Black
19014
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£4.57
Brett Martin 32mm x 2½° Angled Waste Adaptor - White
19015
"Quick & easy to install. Lighweight and robust. Easy to joint. Impact resistant. Made in the UK."
£4.57
Brett Martin 40mm x 2½° Angled Waste Adaptor - Black
20026
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.57
Brett Martin 40mm x 2½° Angled Waste Adaptor - Grey
20027
"Quick & easy to install. Durable. Lightweight. UV Resistant."
£4.57
Speedfit Straight Connector 22MM
48014
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£4.53
8-28mm Aero Disposable Freeze Jacket
11080
Arctic Hayes insulated Arctic Spray freezing jacket, intended for use with Arctic Spray Freeze Kits. Suitable for 8-28mm pipes in all materials. Can be re-used when thawed and stored correctly.
Suitable for 8-28mm pipes. Designed for use with ZEK1 or ZEK2 Arctic Aero Disposable Pipe Freeze Kits.
Includes:
1 x 20cm insulated pipe jacket
2 x cable ties
Suitable for 8-28mm pipes. Designed for use with ZEK1 or ZEK2 Arctic Aero Disposable Pipe Freeze Kits.
Includes:
1 x 20cm insulated pipe jacket
2 x cable ties
£4.50
Speedfit Reducer 22 × 15MM
48023
Quickly and securely connects two unequal sized Speedfit fittings to reduce a line size
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
£4.33
6 Hose Clip - Zinc MSZP 110 - 140mm
M8301
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required.
The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes.
* The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions.
Screw head size: 7mm.
Size: 6.
Adjustment: 110 - 140mm.
The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes.
* The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions.
Screw head size: 7mm.
Size: 6.
Adjustment: 110 - 140mm.
£4.28
Payment options
