Plumbing & Heating

For 19mm riser rail

1/2" BSP Male inlet 1/2"BSP Male Hose Outlet

This traditional toilet syphon easily adjusts from 7.5" - 9.5” in height to allow it to fit in most toilets. Its internal overflow means you don’t need to worry about your bathroom flooding, and the dual flush function and multiple flushing volumes gives you greater control over your water. With this syphon servicing is a breeze, simply unclip the side clip and remove the syphon.

Easy to Service
Adjustable Height from 7.5" - 9.5”
Dual Flush
Multiple Full Flush Volumes
Internal Overflow

Specifications
Size 1 1/2"
Working Temperature 1 - 48°C

The Skylo traditional bottom entry ball valve, can be used to replace cistern valves that has a similar item already. For this valve to function correctly a ball float is screwed to the threaded tail. The valve has an easy operating adjustable arm and a pivoting thread for the ball float.

Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.167 L/S

The Skylo bottom entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a float shield meaning it can squeeze into the tightest cisterns. It can adjust in height from 8" to 12".

Compact
Telescopic
Water Saving Delayed Fill
Quiet Fill
Heavy Duty Brass Threads
Supplied With Double Check Filter

Specifications:

Height Adjustable 8" - 12"
Working Pressure 0.25 - 16bar
Thread Size ½" (UK)
Thread Material Brass
Flow Rate (2 Bar) 0.208 L/S

A compact button or handle cable operated flush valve, that can cater for both 11/2" and 2" outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit uni-button allowing quick access to a cistern for maintenance purposes.

Supplied with Lever & Button
Dual Flush
Universal Button Fits all 40mm, 50mm & 60mm Holes
Supplied with Universal Cradles
Adjustable Flushing Volumes
Internal Adjustable Overflow

Specifications:
Flush Rate 2.1 Litres Per Second
Size Universal
Working Temperature 1 - 30°C

A revolutionary dual entry toilet fill valve that can easily switch between a bottom or side entry valve. No need to worry about those tight spaces either as the float can rotate 180 degrees. It's also kitted out with a delayed fill, lowering water bills and keeping your cistern eco-friendly.

Bottom or Side Entry
Supplied with 1/2" (UK) & 3/8" (Euro) Threads
Water Saving Delayed Fill
180 Degree Rotation Float
Telescopic
Quiet Fill
Supplied With Double Check Filter

Specifications
Height Adjustable 9" - 14"
Working Pressure 0.25 - 16bar
Thread Size ½" (UK) & ⅜" (Euro)
Thread Material Plastic
Flow Rate (2 Bar) 0.153 L/S

A revolutionary dual entry toilet fill valve that can easily switch between a bottom or side entry valve. No need to worry about those tight spaces either as the float can rotate 180 degrees. It's also kitted out with a delayed fill, lowering water bills and keeping your cistern eco-friendly.

Bottom or Side Entry
Supplied with 1/2" (UK) & 3/8" (Euro) Threads
Water Saving Delayed Fill
180 Degree Rotation Float
Telescopic
Quiet Fill
Heavy Duty Brass Threads
Supplied With Double Check Filter

Specifications:

Height Adjustable 9" - 14"
Working Pressure 0.25 - 16bar
Thread Size ½" (UK) & ⅜" (Euro)
Thread Material Brass
Flow Rate (2 Bar) 0.157 L/S

A universal slimline concealed cistern complete with universal float valve which can switch between bottom or side entry. The kit also contains a water saving dual flush valve with a 570mm cable, blanking plugs, flush pipe and flush cone.

Compact Cistern
Supplied with Dual Entry Fill Valve
Easy Install Mounting Bracket
Easy Twist & Remove Dual Flush Valve
Water Saving Adjustable Flushing Volumes
Flushpipe, Fittings & Pan Seal All Included

Specifications:

Flush Rate 2.1 Litres Per Second
Size (H) 320mm x (W) 350mm x (D) 140mm

This traditional toilet syphon easily adjusts from 7.5" - 9.5” in height to allow it to fit in most toilets. Its internal overflow means you don’t need to worry about your bathroom flooding, and the dual flush function and multiple flushing volumes gives you greater control over your water.

Adjustable Height from 7.5" - 9.5”
Dual Flush
Multiple Full Flush Volumes
Internal Overflow

Specifications:
Size 1 1/2"
Working Temperature 1 - 48°C

A compact cable operated flush valve, that can cater for both 11/2" and 2" outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit uni-button allowing quick access to a cistern for maintenance purposes.

Dual Flush
Universal Button Fits all 40mm, 50mm & 60mm Holes
Supplied with Universal Cradles
Adjustable Flushing Volumes
Internal Adjustable Overflow

Specifications:

Flush Rate 2.1 Litres Per Second
Size Universal
Working Temperature 1 - 30°C

A compact cable operated flush valve, that can cater for both 11/2" and 2" outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit uni-button allowing quick access to a cistern for maintenance purposes.

Long Cable
Dual Flush
Supplied with Universal Cradles
Adjustable Flushing Volumes
Internal Adjustable Overflow

Specifications:

Flush Rate 2.1 Litres Per Second
Size Universal
Working Temperature 1 - 30°C

The Skylo traditional side entry ball valve, can be used to replace cistern valves that has a similar item already. For this valve to function correctly a ball float is screwed to the threaded tail. The valve has an easy operating adjustable arm and a pivoting thread for the ball float.

Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.158 L/S

The Skylo side entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a rotating float protected by a float shield meaning it can squeeze into the tightest cisterns.

Compact
180 Degree Rotation Float
Water Saving Delayed Fill
Quiet Fill
Heavy Duty Brass Threads
Supplied With Double Check Filter

Specifications:

Working Pressure 0.3 - 16bar
Thread Size ½" (UK)
Flow Rate (2 Bar) 0.178 L/S
Thread Material Brass

Connects a supply to a tap or other fixture or appliance
JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits

• An alternative to hard piping to a tap or fixture
• Flexible design makes installation hassle free
• Safe flame-free installation, with no hot works, glue or flux
• Braided stainless steel outer layer protects the internal feed from damage
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits

• An alternative to hard piping to a tap or fixture
• Flexible design makes installation hassle free
• Safe flame-free installation, with no hot works, glue or flux
• White PVC design stops the pipe kinking and makes cleaning easier
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance
JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits

• An alternative to hard piping to a tap or fixture
• Flexible design makes installation hassle free
• Safe flame-free installation, with no hot works, glue or flux
• Braided stainless steel outer layer protects the internal feed from damage
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance
JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits

• An alternative to hard piping to a tap or fixture
• Flexible design makes installation hassle free
• Safe flame-free installation, with no hot works, glue or flux
• Braided stainless steel outer layer protects the internal feed from damage
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance
JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits

• An alternative to hard piping to a tap or fixture
• Flexible design makes installation hassle free
• Safe flame-free installation, with no hot works, glue or flux
• Braided stainless steel outer layer protects the internal feed from damage
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance
JG Speedfit x union with service valve and metal connectors (braided) for the connection to a male thread appliance, such as a tap. Ideal for bathroom basin and bath taps, the valve enables water to be isolated in the event of an emergency or for maintenance work using a ¼ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit x union with service valve and metal connectors (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits

• An alternative to hard piping to a tap or fixture
• Integral service valve for isolation with 1/4 turn screwdriver slot
• Flexible design makes installation hassle free
• Safe flame-free installation, with no hot works, glue or flux
• Braided stainless steel outer layer protects the internal feed from damage
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water only (6 Bar @ 65 °C)

Tool-free isolation valve for appliances
JG Speedfit appliance tap allows isolation of appliances such as a washing machines or dishwashers for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit appliance tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.

Features and benefits

• Quickly connects an appliance to the water supply
• Integrated 1/4 turn shut off valve
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water (not suitable for central heating systems)

Easily connects to a tap connections with horizontal feeds (washer included)

JG Speedfit bent tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit bent tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.

Features and benefits

Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems

A durable brass adaptor for connecting Metric to FBSP type fittings
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.

Features and benefits

• Instant push-fit connection and durable male thread
• Safe flame-free installation, with no hot works, glue or flux
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects equally sized pipe to form a 90° pipe bend
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects equally sized pipe to form a 90° pipe bend
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects equally sized pipe to form a 90° pipe bend
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects three pipes of equal size
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects three pipes of equal size
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects three pipes of equal size
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Simply connects pipework to a fixture or appliance without tools (hand-tighten to tap)
JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit and hand-tighten connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects two unequal sized Speedfit fittings to reduce a line size

JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.

Features and benefits

Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems

JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and securely connects three pipes of unequal size
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Plastic service valve allows isolation of a fixture or appliance for emergency or maintenance work
JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.

Features and benefits

• Instant push-fit service valve with 1/4 turn isolation screwdriver slot
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water (not suitable for central heating)

Plastic service valve allows isolation of a fixture or appliance for emergency or maintenance work
JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.

The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.

Features and benefits

• Instant push-fit service valve with 1/4 turn isolation screwdriver slot
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water (not suitable for central heating)

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.

The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.

The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.

The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems