Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Plumbing & Heating
Speedfit Straight Connector 22MM
48014
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£4.42
Speedfit Straight Tap Connector 15MM × 1⁄2″
48026
Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£5.66
Speedfit Straight Tap Connector 15MM × 3⁄4″
48034
Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£6.26
Speedfit Straight Tap Connector 22MM × 3⁄4
48028
Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems
£17.21
Speedfit Superseal Pipe Insert 10MM
48002
Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only
£0.55
Speedfit Superseal Pipe Insert 15MM
48024
Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only
£0.58
Speedfit Superseal Pipe Insert 22MM
48025
Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only
£0.74
Speedfit Tank Connector 15mm
48011
Directly connects a tank to a mains supply simply and securely
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only
£2.69
Speedfit Tank Connector 22mm
48012
Directly connects a tank to a mains supply simply and securely
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only
£3.46
Straight Running Joint M/Silver 40mmx640mm
16021
Aluminium Matt Silver Trim For Straight Running Joints Of All 40mm Up To 640mm Wide Worktop Installations (Rounded Front & Pre-Drilled)
£4.66
Talon 10mm White Pipe Collar
11008
Avoids the need to make good around pipework
Can be fitted onto existing pipework
Manufactured from high grade polypropylene
Simple click together system
Can be fitted onto existing pipework
Manufactured from high grade polypropylene
Simple click together system
£0.94
Talon 15mm 1 Metre Length Chrome Snappit
11001
**Sold Individually** "
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
£9.90
Talon 15mm 1 Metre Length White Snappit
11002
**Sold Individually** UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
£7.57
Talon 22mm Gold Effect Pipe Collar
110425
Avoids the need to make good around pipework
Can be fitted onto existing pipework
Manufactured from high grade polypropylene
Simple click together system
Can be fitted onto existing pipework
Manufactured from high grade polypropylene
Simple click together system
£2.09
Talon Snappit Radiator Snap 15 x 200mm Chrome Effect
11012
**Sold Individually**
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
£3.46
Talon Snappit Radiator Snap 15 x 200mm White
11011
**Sold Individually**
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
£1.94
Thermocouple - Honeywell style
13056
OEM style thermocouple 900mm will fit Honeywell Q309A type thermocouple applications.
Manufactured to be dimensionally equivalent to the original thermocouple but employs a modern tip structure to give faster hold-in and drop-out times.
Manufactured in Europe by a world leading gas safety company.
Manufactured to be dimensionally equivalent to the original thermocouple but employs a modern tip structure to give faster hold-in and drop-out times.
Manufactured in Europe by a world leading gas safety company.
£8.66
Thomas Dudley CP Round Dualflush Pushbutton
13029
Our CP Round Dualflush button is compatible with furniture, tiles, partitioning and walls. For use with Vantage and Miniflo cisterns and Illusion A and V frames.
£43.18
Thomas Dudley Hydroflo Airgap Side Inlet Compact Float Valve
13123
Designed for use as a replacement in most plastic and ceramic exposed and concealed cisterns. Compact delay fill models save water and support BREEAM by only allowing a cistern to start refilling once flushing is complete. The unique side inlet float arm makes it impossible for the float to become detached. This high quality side inlet valve has a built in backflow prevention device making it one of the safest valves available. Hydroflo side inlet compact float valve with brass tail.
£22.75
Thomas Dudley Hydroflo Telescopic Bottom Inlet Standard Fill Brass Tail
13031
udley Hydroflo Float Valves are Equilibrium Quiet Filling Part 4 Valves, manufactured to BS1212 standards. These are available in side or adjustable bottom inlet from 8″ to 11.1/2″, with either a plastic or brass tail option to help prevent cross-threading. The unique float arm makes it impossible for the float to become detached. Filter removal is made quick and simple by providing a key attached to every diverter, without causing any damage to the valve. Simple and easy to install, this valve is a great replacement for any cistern. Hydroflo Telescopic bottom inlet valve with brass tail.
Telescopic valves can have a joint beneath the waterline when installed. To ensure full compliance to water regulations when fitting, please ensure the joint is above the critical waterline.
Telescopic valves can have a joint beneath the waterline when installed. To ensure full compliance to water regulations when fitting, please ensure the joint is above the critical waterline.
£27.65
TIMCO Sanitary Fixing Kit for Cloakroom Basin 7mm x 65mm Screw BZP
28010
Designed to fix cloakroom basins to a variety of solid building materials. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Cloakroom Basin Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Cloakroom Basin Fixings
£6.60
TIMCO Sanitary Fixing Kit for Heavy Duty Basin M10 x 140mm Stud Screw BZP
280085
Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 14
Max Recommended Load kg: 50
Type: Heavy Duty Basin Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 14
Max Recommended Load kg: 50
Type: Heavy Duty Basin Fixings
£2.55
TIMCO Sanitary Fixing Kit for Light Duty Basin M8 x 100mm Stud Screw BZP
28007
Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Light Duty Basin Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Light Duty Basin Fixings
£2.68
TIMCO Sanitary Fixing Kit for Pan/Bidet 6mm x 80mm Hex Head Screw BZP
28009
Designed for floor fixing pan/bidets into a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Flat caps for a concealed finish. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Pan/Bidet Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Max Recommended Load kg: 50
Type: Pan/Bidet Fixings
£3.36
TIMCO Sanitary Fixing Kit for WC & Bidet 5mm x 40mm Screw Plastic
280135
Designed to fix WC pan/bidets to a variety of solid building materials. Fully adjustable for a quick and easy installation. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Type: WC/Bidet Fixings
TECHNICAL DATA:
Drill Hole Dia. mm: 10
Type: WC/Bidet Fixings
£5.73
Vado Ava Mono Basin With Waste
M1033
mono basin mixer
single lever
deck mounted
smooth bodied
with Neoperl easy clean directional aerator
with push basin waste
2 x 1/2" nut x 400mm flexipipe connections
ceramic cartridge W-001-N35
minimum operating pressure 0.2 bar LP
single lever
deck mounted
smooth bodied
with Neoperl easy clean directional aerator
with push basin waste
2 x 1/2" nut x 400mm flexipipe connections
ceramic cartridge W-001-N35
minimum operating pressure 0.2 bar LP
£120.18
Vado Celsius 1/2" Deck Mounted Thermo BSM Pillar Mounted
M1030
Celsius
2 hole thermostatic bath shower mixer
deck mounted
with water flow aerator
with integrated diverter
thermostatic cartridge V-001C-PLA
diverter cartridge CEL-001G-V2-DIV
3/4” x 50mm threaded connection on legs
deck mount drill hole diameter 28mm
minimum operating pressure 1.5 bar MP
2 hole thermostatic bath shower mixer
deck mounted
with water flow aerator
with integrated diverter
thermostatic cartridge V-001C-PLA
diverter cartridge CEL-001G-V2-DIV
3/4” x 50mm threaded connection on legs
deck mount drill hole diameter 28mm
minimum operating pressure 1.5 bar MP
£193.22
Vado Eris Single Function Slide Rail Kit
M1035
Eris
slide rail shower kit
with single function handset
rub-clean
566mm slide rail
700mm overall rail length
with 150cm shower hose and hose retainer
minimum operating pressure 0.2 bar LP
slide rail shower kit
with single function handset
rub-clean
566mm slide rail
700mm overall rail length
with 150cm shower hose and hose retainer
minimum operating pressure 0.2 bar LP
£55.01
Vado Exposed Thermostatic Shower Valve
M1034
exposed thermostatic shower valve, 1/2"
wall mounted
thermostatic cartridge V-001C-PLA
flow cartridge CEL-002B-1/2
3/4" x 1/2" x 50mm male eccentrics
minimum operating pressure 0.2 bar LP
wall mounted
thermostatic cartridge V-001C-PLA
flow cartridge CEL-002B-1/2
3/4" x 1/2" x 50mm male eccentrics
minimum operating pressure 0.2 bar LP
£183.46
Vado Shower Elbows With Shroud
M1027
pair of easy-fix shower brackets with shrouds
wall mounted
15mm compression connection
wall mounted
15mm compression connection
£37.04
Vado Vecta Bath Lever Pillars
M1029
bath pillar taps
deck mounted
with water flow straightener
cold ceramic cartridge C-201-RTC
hot ceramic cartridge C-201-LTC
3/4" x 50mm male threaded connections
deck mount drill hole diameter 27mm
minimum operating pressure 0.2 bar LP
deck mounted
with water flow straightener
cold ceramic cartridge C-201-RTC
hot ceramic cartridge C-201-LTC
3/4" x 50mm male threaded connections
deck mount drill hole diameter 27mm
minimum operating pressure 0.2 bar LP
£90.30
Waterproof Abrasive Cloth Strips (Pack of 10)
11013
Pack of 10 long-lasting, waterproof, non clogging, silicone carbide abrasive strips, perfect for cleaning copper tubes before soldering, or roughing up plastic pipes before jointing.
Webbed design to increase effectiveness
180 grit, medium grade
Size: 38mm x 250mm
Webbed design to increase effectiveness
180 grit, medium grade
Size: 38mm x 250mm
£6.48
Wirquin Slim+ Shower Waste
M1003
SLIM+ is an extra flat shower waste with SMART MEMBRANE TECHNOLOGY. Quick and easy to install in all configurations, extra reliable without any risk of leaks and easy to clean, SLIM+ is guaranteed to meet all the installers and end users expectations.
Available in a range of finishes, the SLIM+ will compliment any bathroom design.
10 year guarantee
Available in a range of finishes, the SLIM+ will compliment any bathroom design.
10 year guarantee
£59.23
Worktop End Cap Matt Silver 30mm x 640mm
16023
Aluminium Matt Silver Trim For End Capping All 40mm Up to 640mm Wide Worktop Installations (Rounded Front & Pre-Drilled)
£5.71
ZE Spray Pipe Freezer Aero Small Kit
11079
The Arctic Hayes ZE Spray Aero, Small Freeze Kit is suitable for 1 x 8-15mm pipe freeze. The safe and professional way to extend or repair pipework in minutes, without draining down or turning off the mains. Allows you to freeze pipes in as little as 2 minutes. Suitable for copper, steel, stainless steel, plastic, lead and iron pipes.
It has a non-flammable formula that is also kinder to the environment, with low global warming potential gas. Saves time and money.
It has a non-flammable formula that is also kinder to the environment, with low global warming potential gas. Saves time and money.
£28.34
Zinc Protected Hose Clip 30 - 40mm
49155
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001.
Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.
Size 1X
Adjustment 30 - 40mm.
Adjustment. 1.1/8 - 1.5/8in
Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.
Size 1X
Adjustment 30 - 40mm.
Adjustment. 1.1/8 - 1.5/8in
£1.73
Vado ARRONDI Mono Basin Mixer Tap
ARR-100/SB-CP
Mono Basin Mixer Tap, finished in a high-shine polished chrome
**This product is not a stocked item and would need to be ordered in especially for you, Please contact us on 02380843787 or onlinesales@pcbuildingsupplies.co.uk**
**This product is not a stocked item and would need to be ordered in especially for you, Please contact us on 02380843787 or onlinesales@pcbuildingsupplies.co.uk**
Call for pricing
Payment options
