Power Tools & Accessories

The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts.

Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Bare Unit, No Battery or Charger Supplied.

Specifications:

Strokes at No Load: 0-3,200/min.
Stroke Length: 26mm.
Bevel Capacity: 0-45°.
Capacity: Metal 10mm, Wood 135mm.

The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools.

The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work.

Specifications:

No Load Speed: 0-20,000/min.
Length: 310mm.

DEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit.

Supplied WITHOUT batteries or a charger.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall.

The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

Specifications:

No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle.

The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

Specifications:

No Load Speed: 5,500/min.
Max Cutting Depth @90º: 64mm.
Blade: 184mm, 16mm Bore.
Bevel Capacity: 57°.

The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following:

1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving.

Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/34,000/bpm.
Torque: 27/70Nm, 15 Settings.
Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in).
No Load Speed: 0-1,000/0-2,800/0-3,250/min.
Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.
Max. Torque: 26/80/205Nm.
Weight: 1.56kg.

1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools.

No Load Speed: 0-20,000/min.
Length: 310mm.
Weight: 1.06kg.

1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

Modes: Rotary, SDS Hammer, Chisel Only.
No Load Speed: 0-1,100/min.
Impact Rate: 0-4,600/bpm with 2.1 joules
Capacity: Wood 26mm, Metal 13mm, Masonry 24mm
Weight: 3.1kg

1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle
Weight: 1.75kg

1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

No Load Speed: 5,500/min.
Max. Cutting Depth: @90º 64mm
Blade: 184 x 16mm Bore
Bevel Capacity: 57°

1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Strokes No Load: 0-3,200/min.
Stroke Length: 26mm
Bevel Capacity: 0-45°
Capacity: Wood 135mm, Metal 10mm
Weight: 2.1kg

Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK™ VI Deep Toolboxes (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Carrier Base (171229)

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T119BO) Wood Jigsaw Blades are specially designed for curved cutting and ideal for epoxy, hardwood, softwood, laminated boards, insulated and heat insulation materials and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T101B) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull T101DP Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics..

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull T144D Wood Jigsaw Blades provide fast straight cuts. Ideal for hardwood, softwood and laminated boards.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T111C) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T101D) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting.

Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 8 mm
Length 75 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 6 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 5 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 4 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 3 mm
Length 60 mm

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places.

The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use.

Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key.

Specifications:

Input Power: 200W.
No Load Speed: 30,000-42,000/min.
Oscillating Angle: 3°.
Sandpaper Size: 93 x 93 x 93mm.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete.

The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations.

Compatible with all other Power X-Change tools and batteries.

Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case.

Specifications:

Modes: Screwdriving, Drilling, Hammer Drilling In Concrete.
No Load Speed: 0-1,100/min.
Impact Rate: 0-5,700/bpm with 1.2 joules.
Capacity: Concrete 12mm.
Charging Time: 30 Minutes.

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application.

Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas.

The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family.

Supplied with:

2 x 18V 2.0Ah Power X-Change Li-ion Batteries.
1 x Power X-Change Li-ion Charger.
1 x Carry Case.

Specifications:

Drill Chuck: Single Sleeve 13mm.
No Load Speed: 0-400/0-1,500/min.
Impact Rate: 0-6,400/0-24,000/bpm.
Max. Torque: 48Nm.
Torque Settings: 23.
Charging Time: 80min..
Weight: 1.5kg.

Blade for cutting glass, Fibreglass and ceramic tiles

Type: Tungsten Carbide ('T' Shaft)

Cutting length: 50mm

Pack Qty: 5

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools.

For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices.

Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger.

Specifications:

Strokes at No Load: 0-2,700/min.
Stroke Length: 20mm.
Bevel Capacity: 0-45°.
Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide.
The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided.

Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor.

Specifications:

Input Power: 1,230 Watt.
No Load Speed: 5,000/min.
Blade: 160 x 16mm Bore, 24 Tooth TCT.
Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch.

Input Power: 25W.
Glue Sticks: 11.3mm Dual Melt.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The STA1GS10DT Dual Temp Glue Sticks have the following specifications:

Length: 100mm (4 inches).
Diameter: 7mm.

Pack of 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use.

Sold singularly or as a box of 5 bits.

Length: 60mm

Vitrex Standard Diamond Blade with a continuous rim for a cleaner cut. Suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone.

Wheel supplied with 22mm dia bore, and is supplied with a 16mm brass reduction ring.

For use with Vitrex 103402NDE.

Diameter: 110mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit.

Bit Size: 8mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System.

Bit Size: 6mm.

These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.

To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Set of 4 Containing: No.6 (7mm), No.8 (8mm), No.10 (10mm), and No.12 (11.5mm).

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

Ideal for drilling, countersinking and counterboring in one operation.

This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.

Uses 7/64in Drill Bit.

To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.

For No 8 screw

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S811H Sabre Saw Blades are ideal for coarse wood, free of nails (5-100mm) and pruning green wood (up to 100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting.

Specification:

Length: 300mm (12in)
Teeth: 6 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1531L Sabre Saw Blades are ideal for coarse fast cuts in wood (tree cutting and pruning).

Specification:

Length: 240mm
Teeth: 5 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S617K Sabre Saw Blades are ideal for coarse wood, free of nails (20-100mm) and pruning green wood (up to100mm). Especially for curved cuts/plunge cuts.

Specification:

Length: 150mm (6in)
Teeth: 3 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S922BF Bi-Metal Sabre Saw Blades are ideal for thick sheet metal (3-8mm) and for solid pipes/profiles (10-100mm).

Specification:

Length: 150mm (6in)
TPI: 14 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S918H Sabre Saw Blades are ideal for medium to thick sheet metal (3-8mm) fine, closed pipes and profiles (10-100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1118BF Saber Saw Blades are ideal for pallet repair, with nails/metal (5-150mm), sheet metal, pipes, aluminium profiles (3-12mm). They have a flexible flush cut.

Specification:

Length: 200mm (8in)
Teeth: 10 TPI

Designed to meet the needs of both the professional tradesman and the home handyman.
All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.
This cutter is to be used for bevelling and chamfering.

Cutting Angle Length C 13.0mm
Overall Diameter D 19.1mm
Cutting Angle 45 °
Shank Diameter 1/4in

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 6.3 mm 1/4in.

Cutting Length: 16 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 15.9 mm 5/8in.

Cutting Length: 50 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 15.0 mm 19/32in.

Cutting Length 25 mm

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 63 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 50 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.0 mm 15/32in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 11.0 mm 7/16in.

Cutting Length: 25 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Cutting Diameter: 4.0 mm 5/32in.

Cutting Length: 11 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges are ideal for DIY and professional use. Produces the perfect radius groove on coving, fluting, picture frames and edge moulds when working with softwoods, hardwoods, MDF and plywood.

1/4in Shank.

Cutting Diameter: 10mm

Cutting Length: 18mm.

Radius: 5mm

Shank Diameter: 1/4in

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges and bearing guided, making these trimmers ideal for professional and DIY use. Used when trimming timber, lippings and plastic laminates.

Type: Flush Trimmer 2 flute

Cutting Diameter: 6.3 mm 1/4in

Cutting Length: 25.4 mm

Shank Diameter: 1/4in

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime.

Supplied with: 1 x Blade for Metal Cutting and 1 x Hex Key.

Specifications:

Input Power: 900W.
Strokes at No Load: 0-2,800/min.
Stroke Height: 20mm.
Max. Cutting Depth: Wood 115mm, Steel 8mm.

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand.

The set of 4 contains sizes No 6, 8, 10 and 12.

Set of Four - Cuts size 6 (7mm), 8 (8mm), 10 (10mm) and 12 (11.5mm) Plugs

The Olympia Tools® Planer has a powerful 650W motor. Its soft grip handle fits securely in the hand and helps prevent fatigue. Fitted with a removable dust bag which keeps your working area clean and free from debris.

Supplied with: 1 x Parallel Guide, 1 x Rebate Guide, 2 x Reversible TCT Blades, 1 x Hex Key, 1 x Spanner and 1 x Removable Dust Bag.

Specifications:

Input Power: 650W.
No Load Speed: 16,000/min.
Planing: Width 82mm, Depth 0-2mm.
Rebating Depth: 0-10mm.

FEATURES
8mm segment height.
Cuts all types of tiles, including granite and marble.

FEATURES
Guaranteed to cut all construction products including metal
Excellent fast cut on universal & hard materials
Reinforced flange
Cooling holes
Semi-transparent
Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES
• Guaranteed to cut all construction products including metal
• Excellent fast cut universal & hard materials
• Reinforced flange
• Cooling holes
• Semi-transparent
• Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES
Guaranteed to cut all construction products including metal
Excellent fast cut universal & hard materials
Reinforced flange
Cooling holes
Semi-transparent
Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES
The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES
The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES

The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES

• The general purpose blade with a 12mm segment
• All round performance
• Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES

Fast cutting universal blade, with 10mm segment
Features super fast turbo segment and cooling holes
Applications: concrete products, clay products, granite, engineering bricks, building products

FEATURES
6mm wide segment blade
Fantastic value for money product
Applications: mortar raking, brick raking, abrasive materials

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate. suitable for wet and dry cutting. Applications: guaranteed to cut porcelain, all hard stone and all ceramic tiles. Mesh segment design ensures minimal chipping of material during cutting. Cooling holes for fast effective heat reduction to ensure the stability of the centre plate whilst cutting extremely hard materials. Brand new ox photo quality screen-print ensures ultimate visibility on shelf and clear overview of blade usage.

FEATURES

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate
Suitable for wet and dry cutting of porcelain, stone and other hard tiles
Mesh segment design ensures minimal chipping of material during cutting

FEATURES

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate
Suitable for wet and dry cutting of porcelain, stone and other hard tiles
Mesh segment design ensures minimal chipping of material during cutting

Input Power: 300W.
No Load Speed: 15,000/22,000/min.
Oscillation Angle: 3.5°.

Input Power: 2,000W.
Heat Settings: 50/400/600°C.
Airflow: 500/250/500 L/min.

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime.

Supplied with: 1 x Hex Key.

Specifications:

Input Power: 900W.
Strokes at No Load: 0-2,800/min.
Stroke Height: 20mm.
Max. Cutting Depth: Wood 115mm, Steel 8mm.

he Olympia Tools® Multi-Sander has a powerful 130W motor and uses a hook & loop sanding sheet fastening system. Its ergonomic, soft grip handle makes it easy to hold and provides precise handling. Fitted with a dust collection box to keep your working area clean and free from debris.

Supplied with: 3 x Sanding Sheets and 1 x Removable Dust Box.

Specifications:

Input Power: 130W.
Oscillating Speed: 14,000/min.
Orbit Diameter: 1.6mm.
Sand Paper Size: 140 x 140 x 80mm.

The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC.

These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping.

Pack of 10 Faithfull Multi-Purpose Cutting Discs 115 x 1.0 x 22.23mm

The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications.

Compatible with many multi-function oscillating power tools.

This Faithfull diamond boot blade will remove tough grout from between tiled surfaces. Its efficient shape allows aggressive grinding without damaging the tile. A long lasting blade which enables continuous work on large projects.

Compatible with many multi-function oscillating power tools.

This 7 piece Faithfull Multi-Function Tool Blade Set contains a selection of the most popular blades for cutting wood, man-made boards and metal and removing grout. Compatible with many multi-function oscillating power tools.

The set comprises of:

3 x Multi-Function Tool CrV Flush Cut Wood Blades Side Set, 2 x 34mm and 68mm.
This fast-cutting saw blade has a broad range of applications with ground, side set hardened teeth. Quick cutting performance in softwood, plastics, plasterboard, plastic pipes and similar materials.

2 x Multi-Function Tool Bi-Metal Flush Cut Wood/Metal Blade 22mm.
The HSS wavy set teeth on this bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for many flush cutting applications and plunge cutting in plasterboard.

1 x Multi-Function Tool Bi-Metal Radial Blade Wood/Metal 87mm.
The HSS wavy set teeth on this bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications.

1 x Multi-Function Tool Radial Carbide Grit Blade 65mm.
Ideal for a broad range of applications with carbide grit edge. Cuts tiles, plaster, porous concrete and similar construction materials. Suitable for cutting out damaged tile joint and for cutting grooves in plaster, porous concrete and similar construction materials.

BLACK + DECKER Piranha Super Sanding Sheets are suitable for wood, paint and varnish, plastics, plaster and light metal sanding.

Fits the following BLACK + DECKER models:

MOUSE: KA150, KA150K, KA160, KA160K, KA161, KA161K, KA165GT, KA165GTK, and MT3000K.

QUATTRO: KC2000FK and KC2002FK.

SANDSTORM: KA250K and KA260GTK.

This pack of 5 BLACK + DECKER X31034 Mouse Sanding Sheets contains: 2 x 80 Grit, 2 x 180 Grit and 1 x 240 Grit.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 400 mm x 80mm.
For 5-10Kg.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 600 x 100mm.
For 10-20Kg.

The Olympia Tools® Mini Rotary Multi-Tool has a powerful 135W motor with a variable speed selection for more control. Fitted with an easy-to-use spindle lock, making it easy to switch between the different accessories. Its soft grip handle makes it easy to hold and provides precise handling.

Supplied in a handy carry case with the following accessories:

2 x Collets (2.3 & 3.2mm).
2 x HSS Drill Bits.
1 x Screw Type Mandrel.
1 x Tapered Screw Type Mandrel.
1 x Sanding Type Mandrel.
2 x Diamond Grinding Points.
10 x Grinding Stones.
3 x Sanding Discs Ø20mm/320 grit.
8 x Cut Off Wheels Ø22 x 1mm Thick.
4 x Sanding Drum Bands 16mm/120 grit.
4 x Polishing Wheels.
1 x Grinding Stone.
1 x Flexible Drive.

Specifications:

Input Power: 135W.
No Load Speed: 10,000-32,000/min.
Max. Collet Size: 3.2mm.

The Einhell TC-AG 115 Mini Grinder is suitable for DIY enthusiasts who want a lightweight, handy tool provides good service on cutting, grinding and roughing jobs in the garden, workshop and garage. Fitted with a disk guard for high safety during operation and a spindle lock for fast and easy tool change.

Equipped with a robust, flat metal gear head, which ensures good power transmission and is very helpful in places which are difficult to access. An additional handle that can be adjusted in two positions enables user-friendly and safe handling even during long work sessions. A flange nut wrench is also provided.

Cutting Disk NOT Included.

Specifications:

Input Power: 500 Watt.
No Load Speed: 12,000/min.
Disc Diameter: 115mm.

This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in.

The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe.

Specifications:

Measuring range: 0-75mm (0-3in).
Resolution: 0.01mm (0.0005in).
Accuracy: ± 0.02mm (0.001in).
Auto off: 5 minutes.
Display: LCD, character height 8mm.

FEATURES

Blade 4932373392 is ideally suited for cutting curves and irregular shapes. Use blade 4932373083 for straight cuts.

The Faithfull Straight Metal Cutting Jigsaw Blade are built for thick materials, ideal for thick sheet metals, non-ferrous metals, and aluminium.
The T118B come in a pack of 5 and their cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.

The Faithfull straight Metal Cutting Jigsaw Blade, for thin materials, is ideal for thin sheet metals, non-ferrous metals, and aluminium.
The 8009-HSS, coming in a pack of 5, the T118A is made of a good quality, for applications which include: Non-Ferrous Metals, Sheet Metal and Aluminium.

Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 21.
Pack Qty: 5.

The Faithfull Straight cutting jigsaw blade is ideal for very thin sheet metals, non-ferrous metals, and aluminium.
The cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.



Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 35.
Pack Qty: 5.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work