Ronseal

Ronseal Interior Varnish is a quick drying varnish with Diamond Hard protection. It delivers superior protection against heat, scratches and water. Quick drying, touch dry in 20 minutes. Recoat after 2 hours. Protects all interior wood with a beautiful fade resistant finish.

Ronseal Interior Varnish is a quick drying varnish with Diamond Hard protection. It delivers superior protection against heat, scratches and water. Quick drying, touch dry in 20 minutes. Recoat after 2 hours. Protects all interior wood with a beautiful fade resistant finish.

A next generation lightweight interior and exterior filler based on acrylic polymer and hollow ceramic microspheres.
Robust macromolecular structure which gives virtually no shrinkage. Filling deep holes without sagging isn't easy but with Ronseal BHF12L Big Hole Smooth Finish Filler it is.

Specially designed to fill any hole up to 50mm deep, it's a high performance filler that's easy to apply and gives a perfectly smooth finish.

When dry, it can be drilled, screwed or nailed.

For use in repairing plaster, stone concrete or wood.
Long lasting tough repair.
Extremely smooth finish.
Ronseal applicator included.
Very good adhesion.
Easy to sand.
Application: Filling Knife.
Surface dry in 1 to 2 hours.
Fills holes up to 50mm deep.
Will accept drills, screws and nails when fully dry.
Protection level: High.

The Ronseal Multi Purpose Wall Filler is a general purpose filler, based on Acrylic Polymer and fine Dolomite fillers, for interior and exterior use, and Surface dry in 1 to 2 hours.

Ronseal multi-purpose produces an extremely smooth finish and has excellent application properties coupled with strength and flexibility. Ideal for making repairs to plaster, stone, concrete or wood.

It is easy to sand and gives excellent adhesion, also gives a long lasting repairs that won't shrink or crack.

Available in Tub or Tube format.
Ronseal applicator included.
Can be drilled once dried hard.

Areas of use: Interior walls and ceilings.
Application: Filling Knife.
Drying Time: approx. 2 hours.
Protection Level: High.

Need to make strong repairs to plaster, stone, concrete or wood? Ronseal Multi-Purpose Powder Smooth Finish Filler is the ultimate, high performance filler.

This filler gives excellent adhesion, fills gaps up to 40mm deep.

A blend of superfine chalk and white plaster with added powdered polymer.

Areas of use: Walls and ceilings.
Application: Filling Knife.
Drying time: 1-2 hour.
Protection level: High.
Can be drilled once dried hard.
Comes in air tight bag.
Easy to mix.
Buttery texture when mixed.
Extremely easy to sand.

Ronseal Ultimate Protection Decking Oil provides superior, natural looking protection, for a longer lasting finish. The unique formula penetrates deeper into the wood to provide increased durability. Providing a lightly tinted finish it will give double the weather resistance and foot traffic protection versus standard decking oils. Unique, new to the market, water-based Linseed Oil technology, colours and waterproofs your deck in one easy step.

Gives a more natural look to your deck and is rainproof in 90 minutes, recoat in 4 hours. Primarily for use on pre-treated decking.

Preparation -

Untreated, weathered decking:
For untreated grey and weathered wood, use Ronseal Decking Restorer to restore the deck's natural colour and provide a sound base for application which ensures the oil penetrates effectively.

Previously finished decking:
Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. To avoid patchiness, and if using a contrasting colour, make sure you remove all previous finishes using Ronseal Decking Stripper. Ensure cut ends are adequately protected using Ronseal Decking End Grain Preserver.

New wood:
New decking should be allowed to weather naturally (usually 6 months). This will make sure any pre-treatment has eroded allowing the stain to penetrate and adhere to the deck. Clean the deck with Ronseal Decking Cleaner and Reviver using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the timber. Rinse thoroughly with clean water ideally using a pressure washer. Allow to dry fully before over coating.

Test effectiveness of the cleaning by splashing the deck with water. If beading occurs, re-clean. Retest before applying any oil. The shade label indicates approximate colour only. It is recommended that you test a small area to determine the final colour which may be influenced by the texture, grain, colour, porosity, type of wood and any previous treatment.