Roofing & Ventilation

110mm Flexi-Pipe kits for connection to ventilation duct or soil vent pipe

Uses:
To connect Timloc Roof Tile Vents to 110mm ventilation duct or soil vent pipe

"Quick & Easy to install. Durable and lightweight. UV resistant. Conforms to EN 1329-1"

"Dry Fix F Plus forms a ridge that is resistant to water, whilst allowing the roof to breathe. Offers quick and simple mechanical fixing of almost all ridge tiles and guaranteed for 20 years. Quick and easy to fit - no special tools or skills required Allows the roof to breathe - provides a ventilated ridge Fully serviceable - easy to maintain even after many years Glass filled nylons - increased strength, resistance and stability Discreet design - provides a more streamlined appearance Can also be used on hips - requires dedicated Hip Trays Long-life durable fixings - Stainless Steel and Nylon"

Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system

Uses:
On roofs with Mini Castellated roof tiles
Enables ventilation directly into a roof space
Can also be connected to a ducted ventilation system inside the building

Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system

Uses:
On roofs with Mini Castellated roof tiles
Enables ventilation directly into a roof space
Can also be connected to a ducted ventilation system inside the building

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

Installation

Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.
A single strip of roofing underlay should be laid up the centre of the valley.
Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.
The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.
The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.
Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar. Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed.

Properties

LEAD REPLACEMENT
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request).

DURABILITY
Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years.

MANUFACTURED IN UK
Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site.

NO MAINTENANCE
The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.

Valley Weights

Standard valley troughs: 1.64kg/m²

Heavy Duty valley troughs: 2.10kg/m²


Valley Thicknesses

Standard valley troughs: 1.3mm

Heavy Duty troughs: 1.6mm

UV resistant for durability
Durable and hardwearing

Bostik Bituminous Mastic for Roofs is a multi-purpose trowel grade bituminous material for waterproofing, stopping, bedding, pointing and sealing. With added fibres for reinforcement. Forms a surface skin, but the mass below remains soft to allow for moderate movement. Perfect for sealing and filling holes in mastic asphalt, roofing felt, corrugated iron, metal guttering and downpipes. Suitable for use for waterproofing, bedding, pointing, sealing and stopping. It can be applied to mastic asphalt, roofing felt, corrugated iron, cast iron, fibre cement, slates, lead, copper, zinc, concrete and timber.

Quick & easy to install.

"Gloss effect uPVC 65mm square downpipe compatible with Brett Martin's 106mm Prostyle and 114mm Squarestyle gutter systems. Quick & easy to install. Lightweight. UV Resistant."

"Designed to allow the continuation of the 115mm Deepstyle gutter system at 135° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

Installation

Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.
A single strip of roofing underlay should be laid up the centre of the valley.
Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.
The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.
The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.
Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar.Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed.

Properties

LEAD REPLACEMENT
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request).

DURABILITY
Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years.

MANUFACTURED IN UK
Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site.

NO MAINTENANCE
The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.

Valley Weights

Standard valley troughs: 1.64kg/m²

Heavy Duty valley troughs: 2.10kg/m²


Valley Thicknesses

Standard valley troughs: 1.3mm

Heavy Duty troughs: 1.6mm

"Gloss uPVC downpipe compatible with Brett Martin's 112mm Roundstyle, 114mm Squarestyle and 115mm Deepstyle gutter systems. Quick & easy to install. Lightweight. UV Resistant."

"Gloss uPVC downpipe compatible with Brett Martin's 112mm Roundstyle, 114mm Squarestyle and 115mm Deepstyle gutter systems. Quick & easy to install. Lightweight. UV Resistant."

"Bostik Flashband Original is a self-adhesive bitumen sealing strip which bonds instantly to provide a permanent watertight seal. It has excellent adhesion to a wide range of building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, glass, roofing felt, and rigid plastics.Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering and repairing roofing felt joints on flat roofs. Provides an instant watertight seal. For new build or emergency repairs. Quick and easy application."

UV resistant for durability
Durable and hardwearing

Non-Profile Profiled Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.

Uses:
On roofs with Non-Profile roof tiles
Enables ventilation directly into a roof space
Can also be connected to a ducted ventilation system inside the building

Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.

Uses
• On roofs with Double Pantile profile roof tiles
• Enables ventilation directly into a roof space
• Can also be connected to a ducted ventilation system inside the building

Lightweight Crysta-Glas is perfect for DIY and replacement glass in the garden. Crysta-glass must be cleaned with warm soap water and a sponge or soft cloth. Do NOT use proprietary glass cleaning products as they may affect the appearance of the product.

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Fits to the base of the 68mm cast iron effect round downpipe to direct rainwater into the gully or other soakaway Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

fitted to the roof edge to prevent water run off.

"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings. The half round gutter is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant."

"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings. The half round gutter is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant."

"Gloss uPVC downpipe compatible with Brett Martin's 112mm Roundstyle, 114mm Squarestyle and 115mm Deepstyle gutter systems. Quick & easy to install. Lightweight. UV Resistant."

"Bostik Feltfix Bituminous Roof Felt Adhesive is a cold applied solvent-based bituminous adhesive. It has high initial grab for bonding bituminous roofing felts to asphalt, felt, metal, timber and concrete. It is also suitable for sealing laps on roofing felt and for bonding mineral chippings to bituminous surfaces. It produces a strong, flexible bond, which hardens and softens with changes of temperature. This adhesive must not be used with or over tar based products. its product should be applied to a clean, dry and dust free surface using a mop, squeegee or stiff brush. Dusty or porous surfaces should be primed with a penetration primer. It is recommended that when laying felt onto timber or wood substrates, the first layer of felt is nailed with galvanised clout head nails, subsequent layers can be bonded with this product. Size - 2.5ltr. Colour - Black. "

"Designed to allow the continuation of the 115mm Deepstyle gutter system at 90° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Bostik Aquaprufe Damp-Proofer & Waterproofer is a solvent free rubber enriched bitumen emulsion for use both internally and externally on floors and walls. It can be applied to damp surfaces and there is no need for a separate primer. The waterproofer must be over coated with plaster or flooring screed. Can be applied to damp surfaces. No need for a separate primer. For use on wood, plaster and cement. Suitable for interior and exterior use."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

fitted to the roof edge to prevent water run off.

"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant. 4 colour options."

"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant."

Bostik Bituminous Black Paint is a solvent-based protective coating for external waterproofing and weather protection of ferrous and non-ferrous metals, concrete, roofing felt, fibre cement, corrugated iron, asphalt and wood. It dries to form an odourless and taint-free bitumen film. It is ready to use, no thinning is necessary.

"Bostik Solvent Free Waterproofer for Roofs is a non-fibrates, flexible bitumen emulsion of medium brushing consistency for use on all common roof surfaces. It is dark brown in colour but dries to form a black finish.Bostik Solvent Free Waterproofer for Roofs provides a long lasting waterproof treatment, under good drying conditions on fibre/cement, roofing felt, mastic asphalt, corrugated iron, slates, tiles, lead, copper and zinc roof surfaces. For wood, metal and cement. Dries to form a long lasting waterproof coating. Can be applied to damp surfaces."

"Quick & easy to install. Lightweight. UV Resistant."

"Quick & easy to install. Lightweight. UV Resistant."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

Inline lever with finger grips for optimum comfort when in use. Spur secures into wedge on the frame to seal and secure the window. A choice of 3 spur wedges enable the handle to be used on a range of rebate heights - 9mm, 13mm, 17mm and 21mm. Locking function for enhanced safety. Supplied with two elongated slots which enable replacement of the majority of old cockspur handles supplied in the last 30 years.

Inline lever with finger grips for optimum comfort when in use. Spur secures into wedge on the frame to seal and secure the window. A choice of 3 spur wedges enable the handle to be used on a range of rebate heights - 9mm, 13mm, 17mm and 21mm. Locking function for enhanced safety. Supplied with two elongated slots which enable replacement of the majority of old cockspur handles supplied in the last 30 years.

"This allows rainwater to leave the gutter and flow into the downpipe. It features integral seals and clips at each side for connecting to the gutter as well as pre-drilled holes for fixing to the fascia board. It also features an outlet for connecting to the 68mm Downpipe. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

UV resistant for durability
Durable and hardwearing

fitted to the roof edge to allow rainwater drainage to flow into the gutter

"This is commonly used to allow the downpipe to connect to the running outlet on the gutter and return to the wall to continue the downpipe. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

for use against a butting wall or parapet.

UV resistant for durability
Durable and hardwearing

Universal espag handle supplied with 5 interchangeable spindle lengths, from 15mm - 55mm. Spindles locate into the back of the handle rose via a click-fit rosette which ensures that only the correct end of the spindle can be inserted into the rose for a secure fit. An edge-to-edge screw cover cap is supplied to enhances aesthetics on the rose. Finger-grips on the lever provide optimum comfort when the handle is in use and an ergonomic button assembly is easy to operate.

Designed to allow the continuation of the 112mm Roundstyle gutter system at 135° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter.

Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

Solid zinc arm turns 90 to prevent sash opening. this product is face fix and us a simple and secure operation - the window can easily be opened from inside by turning the arm into the open position. Supplied with plastic cover caps and conceal screw fixings, and a compression adjustment supplied to suit a range of profile systems.

"Quick & easy to install. Lightweight. UV Resistant. Universal design"

"Quick & easy to install. Lightweight. UV Resistant. Universal design fits 68mm round & 65mm square downpipes"

Designed to allow the continuation of the 112mm Roundstyle gutter system at 90° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter.

Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.

"Gloss uPVC downpipe compatible with Brett Martin's 112mm Roundstyle, 114mm Squarestyle and 115mm Deepstyle gutter systems. Quick & easy to install. Lightweight. UV Resistant."

"Gloss uPVC downpipe compatible with Brett Martin's 112mm Roundstyle, 114mm Squarestyle and 115mm Deepstyle gutter systems. Quick & easy to install. Lightweight. UV Resistant. 6 colour options."

The design of the 112mm running outlet allows it to be converted into a stopend outlet. Simply trim off the exposed fixing lug and insert an internal stopend, thus preventing the need for handed stopend outlet components.

Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Allows the 68mm cast iron effect round downpipe to continue via a 92½° bend. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

Lightweight Crysta-Glas is perfect for DIY and replacement glass in the garden. Crysta-glass must be cleaned with warm soap water and a sponge or soft cloth. Do NOT use proprietary glass cleaning products as they may affect the appearance of the product.

"Bostik Flashband Original is a self-adhesive bitumen sealing strip which bonds instantly to provide a permanent watertight seal. It has excellent adhesion to a wide range of building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, glass, roofing felt, and rigid plastics.Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering and repairing roofing felt joints on flat roofs. Provides an instant watertight seal. For new build or emergency repairs. Quick and easy application."

"Gloss effect uPVC 65mm square downpipe compatible with Brett Martin's 106mm Prostyle and 114mm Squarestyle gutter systems. Quick & easy to install. Lightweight. UV Resistant."

"A continuous verge system, for slate and flat tiles, that presents a clean flush finish and an effective and virtually maintenance free alternative to wet mortar bedding. Long lasting, reliable and virtually maintenance free Protects against wind uplift, water ingress and general deterioration Easy, fast, clean and generally safer mortar free installation Allows virtually all weather installation Integral internal channel collects and discharges rainwater to the gutter Helping to meet BS 5534 Code of practice for slating and tiling Complies with all other relevant regulations and standards Manufactured to BS EN ISO 9001 and BS EN ISO 14001 Independently tested and complies with BS8612"

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Used to join two lengths of 115mm Deepstyle gutter. It features integral seals to ensure water tightness and pre-drilled fixing holes for easy fixing. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings and is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant.."

"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings and is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant.."

This metal rafter side bracket is used in conjunction with the 112mm fascia bracket to fix Brett Martin’s 112mm Roundstyle gutter system to buildings where there is no fascia board, commonly found on barns and country houses.

Quick & easy to install.
Lightweight.

Soudal Soudagum Hydro - 1kg Soudagum Hydro kit, contains two foil bags of 500g Soudagum Hydro, a small bucket, application brush, small reinforcing non-woven fleece (15cm x 30cm) and a pair of disposable gloves. The solvent free Waterproof Protective Coating is suitable for a broad range of applications from roof & gutter repair to general sealing and protection of interior and exterior joints, gaps and cracks.

"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant."

"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant."

Used to join two lengths of gutter together. It features integral seals to ensure water tightness and pre-drilled fixing holes for easy fixing.

Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.

Manufactured from high grade Ferritic (430) stainless steel, Suitable for 13mm and 17mm stack heights and ideal for PVC windows.

A bubble buster with ribbed metal rollers for eliminating bubbles, helps to ensure an even resin to mat ratio.

"This fits to the end of the 115mm Deepstyle gutter run, on the outside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"This fits to the end of the 115mm Deepstyle gutter run, on the inside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative."

"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative."

"Bostik Flashband Original is a self-adhesive bitumen sealing strip which bonds instantly to provide a permanent watertight seal. It has excellent adhesion to a wide range of building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, glass, roofing felt, and rigid plastics.Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering and repairing roofing felt joints on flat roofs. Provides an instant watertight seal. For new build or emergency repairs. Quick and easy application."

Everbuild Black Jack® 903 Bitumen Trowel Mastic is a black, heavily filled, bituminous compound with added fibres for reinforcement, that is applied by trowel. It is used primarily for patching holes in roofs and bituminous coatings. The product forms a surface skin, but the mass below remains soft to allow for moderate movement.