Screws

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 25
Thread Length mm: 20
Size mm: 4.0 x 25
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 30
Thread Length mm: 25
Size mm: 4.0 x 30
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 35
Thread Length mm: 30
Size mm: 4.0 x 35
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 45
Thread Length mm: 40
Size mm: 4.0 x 45
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 50
Thread Length mm: 45
Size mm: 4.0 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 60
Thread Length mm: 55
Size mm: 4.0 x 60
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 70
Thread Length mm: 65
Size mm: 4.0 x 70
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 80
Thread Length mm: 70
Size mm: 4.0 x 80
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 3
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 100
Thread Length mm: 70
Size mm: 5.0 x 100
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 4
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 40
Thread Length mm: 35
Size mm: 5.0 x 40
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 50
Thread Length mm: 45
Size mm: 5.0 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 60
Thread Length mm: 55
Size mm: 5.0 x 60
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 70
Thread Length mm: 65
Size mm: 5.0 x 70
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 80
Thread Length mm: 70
Size mm: 5.0 x 80
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 3
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 90
Thread Length mm: 70
Size mm: 5.0 x 90
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.7
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 10
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 3
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 6
Length mm: 100
Thread Length mm: 70
Size mm: 6.0 x 100
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 11.65
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 12
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 4
Driver Bit Size: PZ3
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 6
Length mm: 120
Thread Length mm: 70
Size mm: 6.0 x 120
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 11.65
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 12
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 4
Driver Bit Size: PZ3
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 6
Length mm: 150
Thread Length mm: 70
Size mm: 6.0 x 150
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 11.65
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 12
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 6
Driver Bit Size: PZ3
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 6
Length mm: 50
Thread Length mm: 45
Size mm: 6.0 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 11.65
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 12
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ3
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 6
Length mm: 60
Thread Length mm: 55
Size mm: 6.0 x 60
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 11.65
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 12
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ3
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 6
Length mm: 80
Thread Length mm: 70
Size mm: 6.0 x 80
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 11.65
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 12
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 3
Driver Bit Size: PZ3
Thread Type: 40° Single
Point Type: Twin-Cut

Specially designed for attaching tongue and groove floorboards and panelling. Provides a secure hidden fixture without causing damage, allowing a flush fit with the next board. Reduced head for concealed countersinking.
Plain shank for pulling the two substrates together without manual clamping.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 30
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 4.66
Substrates: Hardwood, Softwood, Chipboard
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Included Items: TX10 Impact Bit (Qty 1)
Shank Type: Plain
Length inch: 1
Driver Bit Size: TX10
Thread Type: 40° Single
Point Type: Twin-Cut

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. NOTE: Sharp point only.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 20
Thread Length mm: 15
Size mm: 3.5 x 20
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.68
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 6
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp
Size imp.: 6 x 3/4

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 40
Thread Length mm: 35
Size mm: 3.5 x 40
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.68
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 6
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 6 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 25
Thread Length mm: 20
Size mm: 4.0 x 25
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 30
Thread Length mm: 25
Size mm: 4.0 x 30
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 40
Thread Length mm: 35
Size mm: 4.0 x 40
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 50
Thread Length mm: 45
Size mm: 4.0 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 2
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 2

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 50
Thread Length mm: 45
Size mm: 5.0 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.74
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 10
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 2
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 10 x 2

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 5
Length mm: 80
Thread Length mm: 70
Size mm: 5.0 x 80
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 9.74
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 10
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 3
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 10 x 3

Used to secure plasterboard to timber stud work.
The collated strips are specifically designed to be compatible with all leading power tool brands.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 38
Thread Length mm: 33
Size mm: 3.5 x 38
Pack Quantity Unit: Pieces
Recess Type: Phillips
Substrates: Softwood, Drywall
Salt Spray Resistance BS EN 9227 Hrs: 48
Corrosion Rating: 1 - Clean, dry; low humidity environments
Screws Per Strip: 50
Length inch: 1
Driver Bit Size: PH2
Thread Type: Coarse
Point Type: 25° Sharp

Used to secure plasterboard to timber stud work.
The collated strips are specifically designed to be compatible with all leading power tool brands.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 40
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: Phillips
Substrates: Softwood, Drywall
Salt Spray Resistance BS EN 9227 Hrs: 48
Corrosion Rating: 1 - Clean, dry; low humidity environments
Screws Per Strip: 50
Length inch: 1
Driver Bit Size: PH2
Thread Type: Coarse
Point Type: 25° Sharp

Used to secure plasterboard to timber stud work.
The collated strips are specifically designed to be compatible with all leading power tool brands.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 55
Thread Length mm: 50
Size mm: 3.5 x 55
Pack Quantity Unit: Pieces
Recess Type: Phillips
Substrates: Softwood, Drywall
Salt Spray Resistance BS EN 9227 Hrs: 48
Corrosion Rating: 1 - Clean, dry; low humidity environments
Screws Per Strip: 50
Length inch: 2
Driver Bit Size: PH2
Thread Type: Coarse
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 60
Thread Length mm: 50
Size mm: 3.5 x 60
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 25
Thread Length mm: 20
Size mm: 3.5 x 25
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 32
Thread Length mm: 27
Size mm: 3.5 x 32
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 32
Thread Length mm: 27
Size mm: 3.5 x 32
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 38
Thread Length mm: 33
Size mm: 3.5 x 38
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 38
Thread Length mm: 33
Size mm: 3.5 x 38
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 42
Thread Length mm: 37
Size mm: 3.5 x 42
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 42
Thread Length mm: 37
Size mm: 3.5 x 42
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 40
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 40
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 50
Thread Length mm: 45
Size mm: 3.5 x 50
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 50
Thread Length mm: 45
Size mm: 3.5 x 50
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 60
Thread Length mm: 50
Size mm: 3.5 x 60
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 4.2
Length mm: 75
Thread Length mm: 50
Size mm: 4.2 x 75
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 4.8
Length mm: 100
Thread Length mm: 63
Size mm: 4.8 x 100
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 4
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 50
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 100
Plug Size mm: 10.0 x 100
Recess Type: Pozi
Screw Size mm: 5.5 x 105
Size Dia. x L mm: 10.0 x 100
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 8
Driver Bit Size: PZ3
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 50
Plug Dia. mm: 8
Plug Length mm: 100
Plug Size mm: 8.0 x 100
Recess Type: Pozi
Screw Size mm: 4.8 x 105
Size Dia. x L mm: 8.0 x 100
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 8
Driver Bit Size: PZ3
Max Fixture Thickness mm: 40
Min Drill Hole Depth mm: 50
Plug Dia. mm: 8
Plug Length mm: 80
Plug Size mm: 8.0 x 80
Recess Type: Pozi
Screw Size mm: 4.8 x 85
Size Dia. x L mm: 8.0 x 80
Substrates: Concrete, Brick, Block

**Sold Individually**

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 110
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 160
Plug Size mm: 10.0 x 160
Recess Type: Pozi
Screw Size mm: 5.5 x 165
Size Dia. x L mm: 10.0 x 160
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 70
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 120
Plug Size mm: 10.0 x 120
Recess Type: Pozi
Screw Size mm: 5.5 x 125
Size Dia. x L mm: 10.0 x 120
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 90
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 140
Plug Size mm: 10.0 x 140
Recess Type: Pozi
Screw Size mm: 5.5 x 145
Size Dia. x L mm: 10.0 x 140
Substrates: Concrete, Brick, Block

**Sold Individually**

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 80
Plug Size mm: 10.0 x 80
Recess Type: Pozi
Screw Size mm: 5.5 x 85
Size Dia. x L mm: 10.0 x 80
Substrates: Concrete, Brick, Block

**Sold Individually**

A light duty hammer-set through fixing for masonry.
Quick and easy fixing.
Strong collar to support drive nail.
Tough durable nylon plug.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: PZ2
Max Fixture Thickness mm: 35
Min Drill Hole Depth mm: 35
Plug Dia. mm: 6
Plug Length mm: 60
Plug Size mm: 6.0 x 60
Recess Type: Pozi
Screw Size mm: 3.5 x 65
Size Dia. x L mm: 6.0 x 60
Substrates: Concrete, Brick, Block

**Sold Individually**

A light duty hammer-set through fixing for masonry.
Quick and easy fixing.
Strong collar to support drive nail.
Tough durable nylon plug.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 8
Driver Bit Size: PZ3
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 50
Plug Dia. mm: 8
Plug Length mm: 100
Plug Size mm: 8.0 x 100
Recess Type: Pozi
Screw Size mm: 5.0 x 105
Size Dia. x L mm: 8.0 x 100
Substrates: Concrete, Brick, Block

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded. Double countersunk head reduces the likelihood of head shear and assists completion of countersinking. Partially threaded from 1 1/4 and above. Made from C10-18 steel to ensure consistent quality. 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance. Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 3.9
Length mm: 33
Thread Length mm: 21.8
Size mm: 3.9 x 33
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.45
Substrates: Softwood
Gauge: 7
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp
Size imp.: 7 x 1

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.
Double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Partially threaded from 1 1/4 and above.
Made from C10-18 steel to ensure consistent quality.
60° twin-threads with parallel shank for faster insertion and greater pull-out resistance .
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 12
Thread Length mm: 7
Size mm: 4.0 x 12
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 8.06
Substrates: Softwood
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Wafer head countersunk and TX40 recess.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 8
Driver Bit Type: TX Drive
Length mm: 200
Thread Length mm: 70
Size mm: 8.0 x 200
Fixed Washer Dia. mm: 21
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 20.84
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX40 S2 Bit (Qty 1)
Shank Type: Helix
Driver Bit Size: TX40
Thread Type: 50° Single Deep
Point Type: 25° Sharp with Single Slash
Pack Dimensions L x W x H mm: 230 x 90 x 90
Pack Weight kg: 2.38
Application: Framing, Landscaping, Decking, Fencing, Stairs, Roofing, Gazebos, Pergolas, Sleepers

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Wafer head countersunk and TX40 recess.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 8
Driver Bit Type: TX Drive
Length mm: 200
Thread Length mm: 70
Size mm: 8.0 x 200
Fixed Washer Dia. mm: 21
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 20.84
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX40 S2 Bit (Qty 1)
Shank Type: Helix
Driver Bit Size: TX40
Thread Type: 50° Single Deep
Point Type: 25° Sharp with Single Slash
Pack Dimensions L x W x H mm: 230 x 90 x 90
Pack Weight kg: 2.38
Application: Framing, Landscaping, Decking, Fencing, Stairs, Roofing, Gazebos, Pergolas, Sleepers