Timco

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

• 34° collation angle
• Diamond point for maximum penetration
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times
• Suitable for indoor applications
• Conforms to Eurocode 5 and Service Class 1
• Ring shank type

Manufactured to European standards<br>
Cleaned propane and butane gas for cleaner combustion and to improve the working environment<br>
Fully synthetic oil for reduced carbon deposition<br>
High quality propellant to prevent leakage and increase shelf life<br>
Gas filled in accordance with European Regulations (75/324/EWG)<BR>
Fuel Cell Quantity: 2<BR>
UFI Number: TVFS-62M4-J10Q-5PHF<BR>
First Fix

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

• 20° collation angle
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

• Straight collation
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials

**Sold Individually**

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Included Items: M12 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 120
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

**Sold Individually**

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 50
Screw Size mm: M5 x 50
Substrates: Plasterboard, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 50
Thread Type: Metric
Wall and Fixture Thickness mm: 20

**Sold Individually**

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 50)
M10 Hex Full Nuts (Qty 25)
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 70
Nut Size mm: M10
Nut Socket Size mm: 17
Point Type: B Point
Shield Length mm: 60
Stud Length mm: 130
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Projecting
Washer Size mm: M10

**Sold Individually**

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 50)
M10 Hex Full Nuts (Qty 25)
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 70
Nut Size mm: M10
Nut Socket Size mm: 17
Point Type: B Point
Shield Length mm: 60
Stud Length mm: 100
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Projecting
Washer Size mm: M10

**Sold Individually**

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.
<p>
TECHNICAL DATA:
Bolt Length mm: 75
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Edge Distance mm: 75
Fixture Hole Diameter mm: 10
Included Items: M8 Form A Washers (Qty 50)
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Point Type: B Point
Shield Length mm: 50
Socket Size mm: 13
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M8
Thread Type: Metric
Type: Loose
Washer Size mm: M8