Timco

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Comes complete with screws.
3 point tip for quick insertion.
Come with zinc plated pan headed cross recess 4.5 x 30mm screws.

Designed to give a small and economic light weight timber to timber connection such as loft hatches and decking. Timber to timber joist hangers are suitable for light duty applications such as ceiling joists, decking and trimmers. Manufactured from pre-galvanised steel to give a high level of corrosion resistance. NOTE: Tag on base of the hanger helps avoid rotation.

• Conforms to Eurocode 5 and service class 2

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

Unique design for improved mixing suitable for both 300ml and 410ml resins. Spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be reused for subsequent applications.
Low extrusion force.
Unique design for improved mixing.

TECHNICAL DATA:
To Fit Cartridge Size ml: 300ml & 410ml

**Sold Individually**

"Strengthening inside corners. Countersunk holes for a flush finish. Zinc plated steel for internal applications.
TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Fixing Hole Dia. mm: 5 No. of Screw Holes: 6 Size H x L x W mm: 100 x 100 x 22"

**Sold Individually**

Strengthening inside corners.
Countersunk holes for a flush finish.
Zinc plated steel for internal applications.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Fixing Hole Dia. mm: 5
No. of Screw Holes: 4
Size H x L x W mm: 50 x 50 x 16

**Sold Individually**

Strengthening inside corners.
Countersunk holes for a flush finish.
Zinc plated steel for internal applications.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Fixing Hole Dia. mm: 5
No. of Screw Holes: 6
Size H x L x W mm: 75 x 75 x 16

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M10 x 1000
Thread Dia. mm: M10
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M12 x 1000
Thread Dia. mm: M12
Thread Type: Metric