Timco

**Sold Individually**

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 50
Screw Size mm: M5 x 50
Substrates: Plasterboard, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 50
Thread Type: Metric
Wall and Fixture Thickness mm: 20

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 75
Screw Size mm: M5 x 75
Substrates: Drywall, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 75
Thread Type: Metric
Wall and Fixture Thickness mm: 45

For use with all types of builders metal work.
The twisted shank gives an enhanced pull-out resistance. For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3.75
Approx. Pcs Per 1kg: 357
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Metal
Length mm: 30
Size mm: 30 x 3.75
Weight kg: 1
Type: Square Twist

For use with all types of builders metal work.
The twisted shank gives an enhanced pull-out resistance.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3.75
Approx. Pcs Per 1kg: 357
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Metal
Length mm: 30
Size mm: 30 x 3.75
Weight kg: 2.5
Type: Square Twist

**Sold Individually**

Slotted holes to allow for adjustments when strengthening draws and kitchen fittings.
Zinc plated steel for internal applications.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Size H x L x W mm: 29 x 25 x 38

**Sold Individually**

A T joint for strengthening and repairing.
Countersunk holes for a flush finish.
Zinc plated steel for internal applications.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Fixing Hole Dia. mm: 4
No. of Screw Holes: 5
Size W x L x A x A mm: 76 x 76 x 16 x 16

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 140
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 10
Edge Distance mm: 70
Fixture Hole Diameter mm: 12
Max Fixture Thickness mm: 55
Min Drill Hole Depth mm: 50
Nut Size mm: M10
Nut Socket Size mm: 17
Nut Type: Hex Full
Size Thread Dia. x L mm: M10 x 120
Substrates: Concrete
Thread Dia. mm: M10
Thread Type: Metric
Washer Size mm: M10 x 21
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 100
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

**Sold Individually**

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Included Items: M12 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 120
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A