Timco

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 110
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 8
Edge Distance mm: 55
Fixture Hole Diameter mm: 9
Included Items: M8 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 45
Nut Size mm: M8
Nut Socket Size mm: 13
Nut Type: Hex Full
Size Thread Dia. x L mm: M8 x 100
Substrates: Concrete
Thread Dia. mm: M8
Thread Type: Metric
Washer Size mm: M8 x 17
Washer Type: Form A

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded. Double countersunk head reduces the likelihood of head shear and assists completion of countersinking. Partially threaded from 1 1/4 and above. Made from C10-18 steel to ensure consistent quality. 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance. Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 3.9
Length mm: 33
Thread Length mm: 21.8
Size mm: 3.9 x 33
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.45
Substrates: Softwood
Gauge: 7
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp
Size imp.: 7 x 1

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.
Double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Partially threaded from 1 1/4 and above.
Made from C10-18 steel to ensure consistent quality.
60° twin-threads with parallel shank for faster insertion and greater pull-out resistance .
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 12
Thread Length mm: 7
Size mm: 4.0 x 12
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 8.06
Substrates: Softwood
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance