Timco

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating.
Suitable for indoor applications.
Conforms to Eurocode 5 and service class 1.

TECHNICAL DATA:
Shank Dia. mm: 2.36
Approx. Pcs Per 1kg: 750
Service Class 1
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 40
Size mm: 40 x 2.36
Weight kg: 2.5
Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.
Conforms to Eurocode 5 and service class 1.

TECHNICAL DATA:
Shank Dia. mm: 2.65
Approx. Pcs Per 1kg: 440
Service Class 1
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 50
Size mm: 50 x 2.65
Weight kg: 1
Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.
Conforms to Eurocode 5 and service class 1.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 230
Service Class 1
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 65
Size mm: 65 x 3.35
Weight kg: 1
Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating.
Suitable for indoor applications.
Conforms to Eurocode 5 and service class 1.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 230
Service Class 1
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 65
Size mm: 65 x 3.35
Weight kg: 2.5
Type: Annular Ringshank

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Strengthened head to prevent shearing when installed with an impact tool.
Ribs under the head for improved countersinking.
Helix shank for removing debris and to improve clamping.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 4.5
Driver Bit Type: TX Drive
Length mm: 65
Thread Length mm: 42
Size mm: 4.5 x 65
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 7.98
Gauge: 9
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX20 S2 Bit (Qty 1)
Shank Type: Helix
Length inch: 2
Driver Bit Size: TX20
Thread Type: 40° Single Deep
Point Type: Twin-Cut
Size imp.: 9 x 2

A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Strengthened head to prevent shearing when installed with an impact tool.
Ribs under the head for improved countersinking.
Helix shank for removing debris and to improve clamping.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 4.5
Driver Bit Type: TX Drive
Length mm: 75
Thread Length mm: 50
Size mm: 4.5 x 75
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 7.98
Gauge: 9
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX20 S2 Bit (Qty 1)
Shank Type: Helix
Length inch: 2
Driver Bit Size: TX20
Thread Type: 40° Single Deep
Point Type: Twin-Cut
Size imp.: 9 x 2

Designed for use in man-made boards such as MDF and Chipboard. The C2 twin-cut tip gives rapid pickup and reduces the likelihood of splitting, whilst the steep head design finishing teeth and self-countersinking ribs ensure a flush finish. Specifically designed dual action head - finishing teeth and self-countersinking ribs ensures a flush finish.
Plain shank for pulling the two substrates together without manual clamping.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 4.2
Length mm: 55
Thread Length mm: 30
Size mm: 4.2 x 55
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 8.2
Substrates: Hardwood, Softwood, Chipboard, MDF
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Included Items: TX20 Impact Bit (Qty 1)
Shank Type: Plain
Length inch: 2
Driver Bit Size: TX20
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 16
Thread Length mm: 11
Size mm: 3.5 x 16
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Sharp