Timco

Unique design for improved mixing suitable for both 300ml and 410ml resins. Spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be reused for subsequent applications.
Low extrusion force.
Unique design for improved mixing.

TECHNICAL DATA:
To Fit Cartridge Size ml: 300ml & 410ml

Designed for use when fixing with chemical resins.
Chisel point, prevents the rod turning when tightening.
External hex drive.
Embedment depth mark.
Manufactured from grade 5.8 carbon steel.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 12
Fixture Hole Diameter mm: 12
Hole Depth mm: 90
Max Fixture Thickness mm: 20
Nut Size mm: M10
Nut Type: Hex Full
Point Type: Chisel
Size Thread Dia. x L mm: M10 x 130
Thread Dia. mm: M10
Thread Type: Metric
Washer Size mm: M10
Washer Type: Form A

Designed for use when fixing with chemical resins.
Chisel point, prevents the rod turning when tightening.
External hex drive.
Embedment depth mark.
Manufactured from grade 5.8 carbon steel.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Fixture Hole Diameter mm: 14
Hole Depth mm: 110
Max Fixture Thickness mm: 25
Nut Size mm: M12
Nut Type: Hex Full
Point Type: Chisel
Size Thread Dia. x L mm: M12 x 160
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12
Washer Type: Form A

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. NOTE: Sharp point only.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 20
Thread Length mm: 15
Size mm: 3.5 x 20
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.68
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 6
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp
Size imp.: 6 x 3/4

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 40
Thread Length mm: 35
Size mm: 3.5 x 40
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.68
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 6
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 6 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 25
Thread Length mm: 20
Size mm: 4.0 x 25
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 30
Thread Length mm: 25
Size mm: 4.0 x 30
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 40
Thread Length mm: 35
Size mm: 4.0 x 40
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 1
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Double countersunk reduces the likelihood of head shear and assists completion of countersinking.
40° deep single thread to provide a secure fixing with high pull-out resistance.
Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 50
Thread Length mm: 45
Size mm: 4.0 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.87
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar)
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 1,008 +
Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere
Length inch: 2
Driver Bit Size: PZ2
Thread Type: Single Coarse 40°
Point Type: 25° Sharp with Single Slash
Size imp.: 8 x 2