Timco

Designed for use in man-made boards such as MDF and Chipboard. The C2 twin-cut tip gives rapid pickup and reduces the likelihood of splitting, whilst the steep head design finishing teeth and self-countersinking ribs ensure a flush finish. Specifically designed dual action head - finishing teeth and self-countersinking ribs ensures a flush finish. Plain shank for pulling the two substrates together without manual clamping. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 4.2 Length mm: 55 Thread Length mm: 30 Size mm: 4.2 x 55 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 8.2 Substrates: Hardwood, Softwood, Chipboard, MDF Gauge: 8 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Included Items: TX20 Impact Bit (Qty 1) Shank Type: Plain Length inch: 2 Driver Bit Size: TX20 Thread Type: 40° Single Point Type: Twin-Cut

Specially designed for attaching tongue and groove floorboards and panelling. Provides a secure hidden fixture without causing damage, allowing a flush fit with the next board. Reduced head for concealed countersinking. Plain shank for pulling the two substrates together without manual clamping. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 30 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 4.66 Substrates: Hardwood, Softwood, Chipboard Gauge: 6 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Included Items: TX10 Impact Bit (Qty 1) Shank Type: Plain Length inch: 1 Driver Bit Size: TX10 Thread Type: 40° Single Point Type: Twin-Cut

Designed for use when fixing with chemical resins. Chisel point, prevents the rod turning when tightening. External hex drive. Embedment depth mark. Manufactured from grade 5.8 carbon steel. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 12 Fixture Hole Diameter mm: 12 Hole Depth mm: 90 Max Fixture Thickness mm: 20 Nut Size mm: M10 Nut Type: Hex Full Point Type: Chisel Size Thread Dia. x L mm: M10 x 130 Thread Dia. mm: M10 Thread Type: Metric Washer Size mm: M10 Washer Type: Form A

Designed for use when fixing with chemical resins. Chisel point, prevents the rod turning when tightening. External hex drive. Embedment depth mark. Manufactured from grade 5.8 carbon steel. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 14 Fixture Hole Diameter mm: 14 Hole Depth mm: 110 Max Fixture Thickness mm: 25 Nut Size mm: M12 Nut Type: Hex Full Point Type: Chisel Size Thread Dia. x L mm: M12 x 160 Thread Dia. mm: M12 Thread Type: Metric Washer Size mm: M12 Washer Type: Form A