Timco

Designed for use in man-made boards such as MDF and Chipboard. The C2 twin-cut tip gives rapid pickup and reduces the likelihood of splitting, whilst the steep head design finishing teeth and self-countersinking ribs ensure a flush finish. Specifically designed dual action head - finishing teeth and self-countersinking ribs ensures a flush finish. Plain shank for pulling the two substrates together without manual clamping. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 4.2 Length mm: 55 Thread Length mm: 30 Size mm: 4.2 x 55 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 8.2 Substrates: Hardwood, Softwood, Chipboard, MDF Gauge: 8 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Included Items: TX20 Impact Bit (Qty 1) Shank Type: Plain Length inch: 2 Driver Bit Size: TX20 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 16 Thread Length mm: 11 Size mm: 3.5 x 16 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 6.6 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 6 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size: PZ2 Thread Type: 40° Single Point Type: Sharp

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 20 Thread Length mm: 15 Size mm: 3.5 x 20 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 6.6 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 6 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size: PZ2 Thread Type: 40° Single Point Type: Twin-Cut Size imp.: 6 x

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 25 Thread Length mm: 20 Size mm: 3.5 x 25 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 6.6 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 6 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 1 Driver Bit Size: PZ2 Thread Type: 40° Single Point Type: Twin-Cut