Timco

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 25 Thread Length mm: 20 Size mm: 4.0 x 25 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 30 Thread Length mm: 25 Size mm: 4.0 x 30 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 40 Thread Length mm: 35 Size mm: 4.0 x 40 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 50 Thread Length mm: 45 Size mm: 4.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 2 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 2

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 50 Thread Length mm: 45 Size mm: 5.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.74 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 10 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 2 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 10 x 2

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 80 Thread Length mm: 70 Size mm: 5.0 x 80 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.74 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 10 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 3 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 10 x 3