Tools & Site Equipment

The OX Pro 10/13mm Heavy Duty Brick Jointer made from high quality steel and leaves a perfect finish on mortar pointing.
FEATURES
For a professional finish to joints between bricks
Heavy duty design
High quality steel
Sizes clearly engraved onto tool

The Grout Squeegee and Spreader Set is a pack of essential tools for tile adhesive and grout application, consisting of a large squeegee, a 6mm square notch tile adhesive spreader and a 4mm V notch spreader.

The Large squeegee has a strong flexible plastic blade with squeegee edge for rapid grout application and a contoured handle for extra comfort.

The Tile Adhesive spreaders allow for fast adhesive application:
6mm Square Notch - for installing tiles on walls
4mm V Notch – for installing smaller tiles and mosaics on walls

The Scan Waterproof Latex Gloves offer both warmth and water resistance. They have been double dipped in latex for excellent abrasion resistance. The 15g nylon liner and elasticated knitted cuff help keep your hands warm.

Conforms to EN420 and EN388 Standards.

Abrasion Performance Index (1-4): 2
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 3
Puncture Performance Index (1-4): 1

This Faithfull heavy steel bodied plumb bob has a pointed end to assist when marking out and is available in two weights. A centre and cross hole fixing system permit a line to be attached through the centre line of the bob helping to provide an accurate centre reading.

The plumb bob is a simple to use, essential tool for establishing a vertical or plumb line when carrying out building, decorating and many other projects where an accurate vertical line is required.

Weight: 140g (5oz).

These Scan FPP2 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. They are ideal for use with:
- Brick dust
- Concrete and plaster
- Hand sanding of wood and MDF
- Masonry and metal working with power tools (not welding)
- Loft insulation

With a FPP2 protection level, these masks are suitable for protecting against particles of between 2-5 microns, such as fine dusts, fumes, aqueous mists and oil based mists. For a guide on protection levels, please see below.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift.

The masks conform to EN149:2001 and A1:2009.

Disposable Mask Protection Levels:
FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists
FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists
FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists
EN149 Filtering Face Piece for Particulates.

These SCAPPEP2MV Moulded Valved Disposable Masks are supplied in a pack of 3.

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 4.0mm.
Blade Length: 100mm (4in).

"Popular range of precision made blades designed for a variety of applications. Ideal for fast, clean cuts in hardwoods, softwoods, chipboard, fibre board and synthetic materials."

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 6mm (1/4in)

This Monument Steel Radiator Spanner is used on 3/8 in and 10 mm square section radiator vent plugs and bleed screws.
It has a Zinc plated finish with a slightly offset handle.

Mandatory Signs are a Blue circle containing a white image denoting that a specific course of action must be taken. These signs help workers and members of the public instantly understand what course of action is required of them, using simple verbal commands and easily recognisable icons

• Fire door action signs provide essential, detailed information in the event of a fire
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Helps people to clearly identify the exit route off the premises in the event that an evacuation is required due to a fire
• Position around a facility to show where the nearest fire exit is
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry sur

Hazard Warning signs are a Yellow triangle with a black border and symbol denoting a hazard in the environment. These signs are essential to warn employees, visitors and the general public about potential risks in the immediate vicinity.

• Hazard signs must be displayed to warn workers, visitors and the general public of hazardous areas or materials on your premises
• Enables employees and visitors to take adequate safety measures to avoid personal injury
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface

Hazard Warning signs are a Yellow triangle with a black border and symbol denoting a hazard in the environment. These signs are essential to warn employees, visitors and the general public about potential risks in the immediate vicinity.

• Hazard signs must be displayed to warn workers, visitors and the general public of hazardous areas or materials on your premises
• Enables employees and visitors to take adequate safety measures to avoid personal injury
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface

Prohibition Signs are a Red circular band with a diagonal bar on a White Background. The Black symbol behind indicates what type of action employees and visitors need to avoid doing for their own safety and comply with company rules and regulations

• No smoking signs must be displayed at each entrance to your workplace
• Additional no smoking signs can be used internally to help ensure your smoke free policy is adhered to
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

A by-product of coconut harvesting, natural coco brushes are softer when compared to other natural brooms, but still provide good sweeping characteristics. The Faithfull soft coco brooms are for use in dry conditions. These broom heads come complete with a handle and stay.

The Faithfull FAIBRCOCO18H coco broom head comes complete with handle and metal stay with the following dimensions:
450mm (18in)

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 7.0mm.
Working length: 69mm.
Overall length: 109mm.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

6 x Phillips Screwdriver Bits: PH0, PH1, PH2(3) & PH3

6 x Pozidriv Screwdriver Bits: PZ0, PZ1, PZ2(3) & PZ3

5 x Slotted Screwdriver Bits: 3, 4, 5, 6 & 7mm

12 x Hex Screwdriver Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7 & 8mm

13 x Star Screwdriver Bits: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35 & T40

7 x Tamperproof Star Screwdriver Bits: TT10, TT15, TT20, TT25, TT27, TT30 & TT35

6 x Hex Security Screwdriver Bits: 2, 2.5, 3, 4, 5 & 6mm

5 x Spanner Bits: 4 (2), 6, 8 & 10mm

1 x Magnetic Bit Holder 60mm.

"Popular range of precision made blades designed for a variety of applications. Ideal for fast, precise cuts in hardwoods, softwoods, chipboard, fibre board, wooden fibreboard and synthetic materials."

Made From Durable, Natural Fibre (Coco) This Broom Is Ideal For Smooth, Dry Surfaces & Light Debris.

Scan Deluxe Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles.

Manufactured from high density polyethylene and featuring a rain gutter, ratchet adjustable headband, sweatband and six-point terylene harness adjustable from 530mm-640mm. It also includes a chinstrap to ensure helmet is securely fitted.

It weighs 380g and conforms to EN397:2012 + A1:2012.

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S811H Sabre Saw Blades are ideal for coarse wood, free of nails (5-100mm) and pruning green wood (up to 100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

The OX Pro Polyurethane Plasterers Float 11" x 4 1/2" / 280mm x 110mm incorporates a sturdy, lightweight design which offers usability and strength while the non-absorbent pattern face ensures a smooth ripple free finish to surfaces.

FEATURES

Lightweight sturdy construction
Non-absorbent pattern face
Lightweight aluminium shank - fully riveted
Handle set for perfect balance
Duragrip handle for ultimate comfort

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

Faithfull Braided Nylon Chalk Line for use with powdered chalk for marking between two points to give a straight line.

Braided line resists fraying, and is also useful for a plumb line as it does not spin round as conventional twisted cord.

Braided nylon has less stretch than other lines and is also the strongest.

Length: 36m

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.0 mm 15/32in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The Monument Radiator Spanner Air Release Key, 2054X, made from steel, a zinc plated valve spanner and an air release key, with a slightly offset handle.

Specification:

Size: 12mm (Double Ended).

The Vileda 2-in-1 Dustpan and Brush Set is ideal for quick cleaning tasks. The dustpan features a flexible pan and rubber lip that helps to easily collect dirt on uneven floor surfaces. The brush has black bristles for sweeping hairs and dirt and has firmer, angled red bristles that are ideal for sweeping in corners and along edges.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 11.0 mm 7/16in.

Cutting Length: 25 mm.

Shank Diameter: 1/4in.

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

The Faithfull TDCAM51 cam buckle tie-downs are widely used in the transport and building industries and for many outdoor leisure activities. They may also be used to secure items in situ. These quick action tie-downs are designed for use when transporting lightweight items and are perfect for use with car roof racks.

Manufactured using a 100% soft polyester webbing and in accordance EN12195-2, these tie downs are extremely hard wearing, durable and robust. Cam buckle straps are efficient and quick to use, the webbing is simply pulled through self-locking cam buckle to the desired tension. Releasing the load is easily achieved by pressing down on the quick release lever at the rear of the buckle to release the tension.

Manufactured in accordance to EN12195-2.

Specification

Length: 5m.
Width: 25mm.
Breaking Strain: 200kg/daN.
Max. Working Load: 100kg/daN.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

This R.S.T. Scarifier is used for scratching plaster undercoat. It has a blue steel blade and its soft touch handle increases user comfort.

Size: 200mm (8 inch).

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Helps people to clearly identify the exit route off the premises in the event that an evacuation is required due to a fire
• Position around a facility to show where the nearest fire exit is
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry sur

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Small Float Size: 280 x 110mm (11 x 4 1/4 in)

This Faithfull Bassine/Cane Stiff Flat Broom Head is most suitable for use in dry conditions. Cane combined with Bass provides a natural brush, having the good sweeping characteristics of bassine with added stiffness, thanks to the cane. They are best used dry as can distort if used wet.

Broom head only.

Specifications:

Width: 325mm (13in).
Socket: 28mm.
Style: Flat.

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Pozidriv
Tip Size PZ.2
Blade Length 125mm (5 in)

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Extremely durable design 15L Capacity Weather resistant Bends and flexes rather than split and crack. Easy to clean, maintain and keep hygienic

FEATURES

Extremely durable design
15L capacity
Weather resistant
Manufactured with a high rubber content which allows the material to bend and flex rather than split and crack
Easy to clean, maintain and keep hygienic
Internal fill markings for accurate measurements of liquids and powders
Pouring spout for accurate dispensing of liquids

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

Manufactured to British standard.

R.S.T. Taping Knife with a blued steel blade. Suitable for drywall lining. Fitted with a soft touch handle for increased user comfort.

The blade is made from blued steel.

Size: 200mm (8 inch).

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 8.50mm.
Working length: 75mm.
Overall length: 117mm.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

Scan Flexi Safety Glasses are worn for protection against low energy, high speed impacts. These Flexible Safety Glasses are packed with features, including highly flexible arms, soft nose bridge for user comfort, as well as a UV, scratch and impact resistant lens with anti-fog coating. The wrap-around single piece lens of these ultra-lightweight protective glasses also provides maximum peripheral vision.

Conforms to EN166:1F – withstands low energy high speed impacts up to 45m/s (100mph) and EN170.

This Twin Pack contains:

1 x Pair of Clear Lens Safety Glasses for general indoor applications.

1 x Pair of Smoke Lens Safety Glasses for outdoor protection against excessive glare.

The Scan Flexi Spectacles have a sports style, designed for protection against low energy, high-speed impacts of up to 45m/s (100mph). They are manufactured using a single piece, wraparound lens to provide maximum peripheral vision and side protection. The lens is scratch and impact resistant with an anti-fog coating and is UV resistant to EN 170. The spectacles are user-friendly, ultra-lightweight with super flexible arms and feature a soft nose bridge for added comfort.

Coloured lens helps filter light to enhance your visibility from indoor low light to outdoors where bright light can be an issue. Selecting the correct shade (lens filter) will improve visibility in many applications by enhancing the contrast and protecting eyes from excessive glare.

Conforms to EN 166:1F and EN 170 UV ray protection.

The Scan Flexi Spectacle Clear are ideal for general use indoors, under normal lighting conditions.

The Scan Flexi Spectacles have a sports style, designed for protection against low energy, high-speed impacts of up to 45m/s (100mph). They are manufactured using a single piece, wraparound lens to provide maximum peripheral vision and side protection. The lens is scratch and impact resistant with an anti-fog coating and is UV resistant to EN 170. The spectacles are user-friendly, ultra-lightweight with super flexible arms and feature a soft nose bridge for added comfort.

Coloured lens helps filter light to enhance your visibility from indoor low light to outdoors where bright light can be an issue. Selecting the correct shade (lens filter) will improve visibility in many applications by enhancing the contrast and protecting eyes from excessive glare.

Conforms to EN 166:1F and EN 170 UV ray protection.

The Scan Flexi Spectacle Smoke are ideal for outdoor use, for protection from excessive glare.

The Scan Flexi Spectacles have a sports style, designed for protection against low energy, high-speed impacts of up to 45m/s (100mph). They are manufactured using a single piece, wraparound lens to provide maximum peripheral vision and side protection. The lens is scratch and impact resistant with an anti-fog coating and is UV resistant to EN 170. The spectacles are user-friendly, ultra-lightweight with super flexible arms and feature a soft nose bridge for added comfort.

Coloured lens helps filter light to enhance your visibility from indoor low light to outdoors where bright light can be an issue. Selecting the correct shade (lens filter) will improve visibility in many applications by enhancing the contrast and protecting eyes from excessive glare.

Conforms to EN 166:1F and EN 170 UV ray protection.

The Scan Flexi Spectacle Amber are ideal for low light applications, indoors.

Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm.

1 x XMS Twin Pack Paint Markers (Cdu Only)

1 x 160mm (6in) Pointing Trowel.

1 x 175mm (7in) Gauging Trowel.

1 x 275mm (11in) Brick Trowel.

The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.

The hacksaw frame has an alternative 90° blade mounting for flush cutting. It is supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex® bi-metal blade for excellent cutting performance.

Supplied with 3 extra blades FREE.

Specifications:

Frame Length: 432mm.
Blade Length: 300mm (12in).
Weight: 470g.

The Faithfull Heavy-Duty Multi-Function Snips are ideal for cutting a range of materials including carpet, steel wire, rope and PVC sheets. Manufactured from heavy-duty CR-V, ensuring resistance to abrasion and corrosion. The snips include a wire stripping function which features the most common sizes, plus a handy crimping action.

Anti-slip handles provide extra grip when in use, whilst the spring action aids the cutting action during prolonged use. The handle lock provides extra safety and easy storage.

Specifications:

Max. Cutting Capacity:
Cold Rolled Steel to ASME A1008/A1008M & AISI 304 or 316 (annealed) Stainless Steel Plates: up to 0.6mm.
Branches: 5mm Ø.
Algam (Iron Sheet): 0.8mm.
MDF: 5mm.
PVC Board: 4mm.
Rubber: 5mm.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Scan Collapsible Ear Defenders are suitable for general purpose use. Effective in reducing noise levels, whilst still allowing the wearer to hear normal conversation. The soft and wide PVC ear cushions enhance comfort, and the adjustable cup height is designed to fit the majority of wearers. Foldable for easy storage.

Conform to EN 352-1:2002 standard.

SNR 28dB - Single Number Rating (SNR) = the number of decibels reduced by the product.

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 18mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley FatMax® Snap-Off Knife is suitable for heavy-duty cutting. It features a blade wiper to remove excess debris and prolong the life of the blade. It also has a blade locking clamp and spare blades are automatically loaded. A removable blade snapper ensures faster and safer removal of a worn segment. The body has a soft grip, bi-material handle for comfort and control.

The Faithfull Pencil Marking Set is designed to aid in the marking of hard to reach places such as drilled holes, tight corners and piping. Each pencil can be used to easily mark any surface, whether it’s wet or dry. If needed, the markings can be wiped clean with a damp cloth.

This set contains the following:

1 x Long Reach Marker.
1 x Pen Holder.
12 x Colour Refills in a handy carry case (6 Black, 3 Red, 3 Yellow).

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Designed to meet the needs of both the professional tradesman and the home handyman.
All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.
This cutter is to be used for bevelling and chamfering.

Cutting Angle Length C 13.0mm
Overall Diameter D 19.1mm
Cutting Angle 45 °
Shank Diameter 1/4in

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 5.5mm.
Blade Length: 150mm (6in).

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 22mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

This Faithfull Adjustable Pin Key for angle grinders is for use with locknuts when fitting or removing abrasive discs. It is a fully adjustable pin wrench from 15 to 52mm with a pin diameter of 4mm. The stepped spanner handle can be used to undo nuts from 10 to 19mm.
The FAIPINKEY is an ideal replacement pin wrench for most angle grinders, bench grinders, mitre saws and circular saws.

Specifications:

Capacity: 15-52mm.
Pin Diameter: 4mm.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 400 mm x 80mm.
For 5-10Kg.

The Faithfull replacement sledge hammer handle in straight grained hickory to BS3823, with a waxed finish.

Length: 600mm (24 in)

The Footprint 620 Line Pins are made from drop-forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builder's string to make sure that a course of bricks is straight and true.

Length: 160mm (6.1/4in).

2 x Footprint 620 Line Pins.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 8.0mm.
Working length: 75mm.
Overall length: 117mm.

This RST bucket trowel has a blade manufactured from carbon steel. This tool is primarily used for mixing or 'gauging' small quantities of plaster, sand & cement. Its rounded corners make cleaning of buckets easy. It is fitted with a soft touch handle.

Size: 180mm (7in).

R.S.T. Taping Knife with a blued steel blade. Suitable for drywall lining. Fitted with a soft touch handle for increased user comfort.

The blade is made from blued steel.

This R.S.T. Plasterers finishing trowel has a strong and durable carbon steel blade, which is fixed with invisible rivets. Finishing trowels are used in smoothing and finishing the surface of plaster. They help to compact the surface and add to the quality and durability of the work.

Size: 280 x 115mm (11 x 4.1/2in).

Fitted with a banana shaped wooden handle.

"Popular range of precision made blades designed for a variety of applications. For straight and curved cuts. For fast, clean cuts in hardwoods, softwoods, chipboard, plywood and synthetics."

The Stanley 99E Original Retractable Blade Knife is made from grey painted die-cast metal body, which is ergonomically shaped for a good, comfortable grip. The blade extension can be controlled by the blade shifter, and 5 blade position allows a wider usage for a variety of cutting applications. The interlock nose firmly secures the blade into knife. For safety, the blade can be fully retracted into the body.

Length: 155mm.

Supplied with 3 blades, stored in the handle for safety and convenience.

The OX Pro 4" London Pointing Trowel is made from high quality carbon steel and is tempered and ground for optimum accuracy and durability. Its DURAGRIP handle with finger protection is calibrated to give perfect balance and angle of lift.
FEATURES
DURAGRIP handle with finger protection
High quality carbon steel
Straight welded shank
Soft grip handle for extreme comfort

The OX Pro 2'/50mm Joint Knife is excellent for surface preparation and application of fillers and compounds. It features a high quality flexible stainless steel blade while its soft DURAGRIP handle ensures comfort during use and incorporates a hammer end.
FEATURES
Stainless steel rivet secures the blade inside the handle more securely
Rugged polypropylene handle core
TPR soft-grip & ergonomic engineered handle that absorbs shock and reduces user fatigue
Safety finger stop/ thumb bolster for more comfortable holding
Superior quality with fully hardened, mirror polished blade.

The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions:
Size: 26mm diameter x 60mm long x 8mm shank.

These lines are normally used for giving a straight edge for laying bricks etc.

Length: 100m.

These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing.

They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection.

Will fit most makes of bowsaw frame.

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

These Faithfull brass wire scratch brushes are used in situations where there could be a potential fire or explosion hazard.

Brass wire brushes will not cause a spark.

4 Row.

he Vitrex Safety Helmet is made from high-density polyethylene and is fitted with a sweatband for extra comfort. Its adjustable internal harness fits most head sizes. Lightweight and comfortable to wear.

Ideal for various DIY projects including building work, structural repairs, tree cutting and lopping.

Conforms to EN 397, CE approved.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 75mm (3 in)

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

The OX Pro 8mm Tuck Pointer features a high quality one piece carbon steel blade and a soft DURAGRIP handle for added comfort while you work.

FEATURES

One piece high quality carbon steel blade
DURAGRIP handle with finger protection
Soft grip handle for extreme comfort