Tools & Site Equipment

These Faithfull Standard Padsaw Blades are designed to fit most brands of padsaws, keyhole saws and pocket saws. They are made from high quality tempered carbon silicon steel and are suitable for cutting wood, plastic and plasterboard. Specifications: Length: 250mm (10in). Pack Quantity: 2.

The OX Trade Heavy Duty Chalk Line Reel - 100ft / 30M Chalk features a high impact cast metal body and stainless-steel hook. This versatile tool can also double as a plumb bob. FEATURES Dual use ' can be used as plumb bob High impact cast metal body Stainless-steel hook 3M Chalkline length

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF. High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill. The Faithfull FAIHBB35HCS HCS Hinge Bore Bit has the following dimensions: Size: 35mm diameter x 60mm long x 8mm shank.

Manufactured using silicon carbide abrasive and ideal for sharpening scythes and other agricultural edge tools. Each stone is symmetrical. They are unaffected by climate conditions and designed to cut fast and clean. Use Dry. Round Tapered 305mm (12 in)

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. 5 Piece Lip & Spur Wood Drill Bit Set, these are the preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs. Sizes: 4, 5, 6, 8 and 10mm. 4mm: Working Length: 43mm, Overall Length: 75mm. 5mm: Working Length: 50mm, Overall Length: 85mm. 6mm: Working Length: 52mm, Overall Length: 92mm. 8mm: Working Length: 75mm, Overall Length: 120mm. 10mm: Working Length: 80mm, Overall Length: 130mm.

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Flared Tip Size 10.0mm Blade Length 200mm (8 in)

The Stanley sliding pocket knife has an all metal construction, making it solid, reliable and long lasting. It allows easy blade change, with no tools required, meaning that it is easier and faster than a standard utility knife. The knife's one-handed operation blade slider extends the blade easily and quickly. A push down and slide safety feature ensures that the blade is not accidentally extended. For convenience, the knife is pocket sized and has a metal belt clip for easy carriage. Accepts all standard Stanley blades (11-911, 11-921, 11-983).

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use. 1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 12mm (1/2in)

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.

Scan Disposable Latex Gloves are lightly powdered inside to absorb moisture, keeping hands dry and sweat-free. The gloves are ambidextrous, meaning that any glove will fit either left or right hands. They are non-sterile. Manufactured to BS EN 455 parts 1 and 2. Size: Large Box Quantity: 100

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 11.00mm. Working length: 94mm. Overall length: 142mm.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers. Size 150mm (6 in)

The OX Pro 25mm Tuck Pointer features a high quality one piece carbon steel blade and a soft DURAGRIP handle for added comfort while you work. FEATURES One piece high quality carbon steel blade DURAGRIP handle with finger protection Soft grip handle for extreme comfort

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide. Flexible blade. Size: 15.2cm (6 inch).

The Monument GRIP+ 323F Tap Backnut Box Spanner is double-ended for the quick assembly of tap backnuts on basins. Part of the GRIP+ range.

The OX Pro Margin Trowel ' 5" x 2" / 125 x 50mm features a flat rectangular precision tapered ground blade made from high quality carbon steel. Its DURAGRIP handle provides extreme comfort. FEATURES High quality carbon steel Flat rectangular blade DURAGRIP handle for extreme comfort Precision tapered ground blade

Irwin Mini Saw uses standard hacksaw blades and its design allows it to be used in confined spaces. Supplied with 1 x 250mm (10in) blade.

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley MaxSteel adjustable wrenches have a narrow head design for limited space applications and Laser-marked SAE and metric jaw scale for easy fastener size. The forged alloy-steel body increases strength and the extra wide jaw capacity opens wider than standard adjustable wrenches. They have a bi-material handle for a comfortable grip. Ideal for automotive maintenance and repair, plumbing and general assembly tasks. Stanley STA090947 Adjustable Wrench. Size: 150mm (6 in). Jaw capacity: 24mm.

These Scan FPP3 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. These masks have passed the optional Dolomite clogging test, giving the user better breathing resistance for longer. They are flat folding for easy pocket storage. They are ideal for use with: - Brick dust - Toxic waste disposal - Casting metals - Smoke fumes - Paint and varnish fumes - Welding - Hand and power sanding of soft and hard wood and MDF dust - Masonry and concrete dust - Metalworking with power tools - Loft insulation/fibre glass - Mineral fibres - Silica - Conforms to EN149:2001+A1:2009. With a FPP3 protection level, these masks will protect lungs against very fine particles (less than 2 microns), such as very fine dusts, fibres, aqueous mists and oil-based mists. For a guide on protection levels, please see below. The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and full PVC face seal for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift. The masks conform to EN149: 2001 + A1: 2009 Disposable Mask Protection Levels: FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists EN149 Filtering Face Piece for Particulates.

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing. With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time. Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 18 TPI

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing. With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time. Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 32 TPI

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 11.00mm. Working length: 94mm. Overall length: 142mm.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

The OX Pro Small Tool 19mm is drop forged from a single piece high quality carbon steel. Perfectly engineered, ground, and polished the small tool is perfect for intricate mortar and masonry work. FEATURES High quality carbon steel One piece drop forged Precision ground & tempered

The OX Pro Small Tool 16mm is drop forged from a single piece high quality carbon steel. Perfectly engineered, ground, and polished the small tool is perfect for intricate mortar and masonry work. FEATURES High quality carbon steel One piece drop forged Precision ground & tempered

The OX Pro Small Tool 13mm is drop forged from a single piece high quality carbon steel. Perfectly engineered, ground, and polished the small tool is perfect for intricate mortar and masonry work. FEATURES High quality carbon steel One piece drop forged Precision ground & tempered

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

Length: 5m Width: 25mm Breaking Strain: 600kg/daN Maximum Working Load: 300kg/daN NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT. Pack quantity: 4. Colour: Green.

Contains two of each size: 25cm, 45cm, 60cm, 80cm and 100cm.

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

Manufactured to EN 13236 quality standard. The CorePlus GP115 General-Purpose Hybrid Turbo Diamond Blade has the following specifications: Diameter: 115mm Bore: 22.23mm Segment Height: 15mm Segment Width: 2.8mm.

Metric Sizes: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 and 10.0mm

Specifications: Sizes: 380mm (15") and 180mm (7"). Material: Drop-forged, heat-treated steel with a powder-coated finish.

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

The OX Pro 6" London Pointing Trowel is made from high quality carbon steel and is tempered and ground for optimum accuracy and durability. Its DURAGRIP handle with finger protection is calibrated to give perfect balance and angle of lift. FEATURES DURAGRIP handle with finger protection High quality carbon steel Straight welded shank Soft grip handle for extreme comfort

"Top selling blades available in twin packs with 2 x 100ml oil shots. 2 x 300mm blades and 2 x 100ml oil shots. Available with SMI-7 Universal diamond blades, MGP-10 concrete diamond blades, or SGP-15 diamond blades. Semi synthetic 2-stroke oil suitable for all modern static 2-stroke engines."

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

"Hardened steel hammer masonry drill bits for general purpose applications. SDS+ shank. Super flute spiral aids consistent drilling speed and efficient debris removal. Tungsten carbide tipped for longer life. Hardened steel body for extra strength and reduced breakage. Suitable for masonry, concrete and stone."

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in Shank Cutting Diameter: 15.0 mm 19/32in. Cutting Length 25 mm Shank Diameter: 1/4in.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Faithfull Utility Folding Knife is a compact sized folding pocket knife and a blade locking system with quick blade change. It has a stainless steel blade holder and a handy belt clip. comes in 3 (random) colours. Folded Size: 85mm (3.1/4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 28mm. Working length: 50mm (2in). Overall length: 100mm (4in).

The OX Pro Mixing Paddle - 80 x 400mm Hex Shaft with positive ribbon is ideal for mixing low to medium materials quickly and effectively. Its high quality chrome plated steel shaft ensures durability and makes it easy to clean. FEATURES Positive ribbon / hex shaft General purpose use on low to medium viscosity materials Chrome plated durable, high quality steel 80 x 400mm

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard. Hardpoint tenon saw with soft-grip handle for user comfort. The ideal choice for fine carpentry and can be used with a mitre box. Size: 250mm (10 in) Teeth 12 tpi.

FEATURES • The general purpose blade with a 12mm segment • All round performance • Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

The Faithfull PDRWCPL is designed for use within the toilet bowl, this plastic bellow plunger is shaped to force a powerful jet of water directly at a blockage within the main bend of the toilet pan. Unlike a drain auger the plunger has no hard moving parts so there is no chance of scratching the pan. Simple and easy to use, this tool is the first to grab when tackling a blocked toilet, manufactured from durable plastic it is easily cleaned and is fitted with a removable handle for storage. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Overall length: 530mm (20.3/4in).

Manufactured in accordance to EN12195-2. Specifications: Length: 5m Width: 25mm Breaking Strain: 600kg/daN Maximum Working Load: 300kg/daN NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT

The OX Pro Sponge Rubber Float - Coarse includes cell pads cemented into an aluminium backing plate for strength and durability. FEATURES Sponge rubber Coarse cell pad Cemented to aluminium backing plate Durable plastic handle

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 32mm. Working length: 50mm (2in). Overall length: 100mm (4in).

The Wonder Mitre is a mitre guide that has been designed to handle the convex surface of coving. It has specially shaped notches that grip the coving, holding it fast. Providing the walls are square, very little finishing will be required. Suitable for coving up to 127mm (5in).

Heavy duty, tough and reusable plasterers mixing bucket with straight walls to make mixing easier. Reusable and easy to clean. Made from recycled polypropylene. Metal handle with plastic grip. Holds full bags of finished plaster or browning.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt. Size: 600 x 100mm. For 10-20Kg.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 10.00mm. Working length: 87mm. Overall length: 133mm.

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK. The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting. Specification: Length: 300mm (12in) Teeth: 6 TPI

The Faithfull polyurethane backed Sponge Float for finishing grainy surfaces such as sand and cement mix, or for applying certain plaster finishes.

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.

FEATURES Designed for clearing out mortar from between brickwork prior to pointing Strong aluminium handle contoured to fit the hand Two hardwearing wheels and replaceable point

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in Shank Cutting Diameter: 12.7 mm 1/2in. Cutting Length: 50 mm. Shank Diameter: 1/2in.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 10.50mm. Working length: 87mm. Overall length: 133mm.

These Faithfull mitre blocks are made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability. With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws. Ideal for use when cutting picture frame joints and general carpentry work. Block Length: 300mm (12in) Block Width: 64mm (2.1/2in)

Monument GRIP+ Mono Tap Backnut Spanner Set is a set of 3 double-ended tap back nut box spanners for quick assembly of tap backnuts on basins. Supplied with T-bar. The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.

The Stanley Surform® Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade. Overall Length: 400mm (16in).

The Stanley Surform® Flat Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The metal body gives strength and durability and a thumb screw provides a quick blade release. It is supplied fitted with a 140mm (5.1/2in) fine cut blade.

The MIDIBAG can hold up to 1 tonne of weight – that’s the weight of a fully grown polar bear! Even when full, you’d be hard pushed to reach the weight limit. how it works 1 - Buy it Order online from HIPPO now and we aim to deliver to your home the next working day: you can also get your pre-paid collection code at the same time. Alternatively, you can buy HIPPOBAGs online from all the great DIY stores. 2 - Fill it Take your time, our HIPPOBAGs are flat-packed for easy storage, ready to fill, whenever you want. Don’t forget that, unlike some other waste companies, we’re happy to take your heavy waste: soil, rubble and bricks are no problem! 3 - Book it When you’re ready for us to take it away, book a collection either using your pre-paid collection code or if you don’t have one, you can buy your collection online. Or, just give our friendly team a call. 4 - We collect Contact free collection and thanks to our brilliant team of HIPPO drivers we’ll be there as quickly as we can. **PLEASE NOTE** - PC Building Supplies Ltd is only a stockist of the HIPPO bags, we cannot collect or arrange collection on your behalf. you will need to contact HIPPO Directly.

Contains: 48 tooth ratchet handle. 9 sockets (5 to 13mm). 62 screwdriver bits (SL, PZ, PH, TX, Hex).

The OX Pro Dry Wall Internal Corner Trowel features a flexible stainless steel blade with strong aluminium mounting ensuring perfect 90' corners. Its curved corners eliminate lines in the plaster and its DURAGRIP handle makes it comfortable in use. FEATURES Flexible stainless steel blade Strong aluminium mounting Flexes for perfect 90' corners DURAGRIP handle for extreme comfort Curved corners to eliminate lines in plaster

This Monument Heavy Duty Basin Wrench is used for fitting back nuts and union nuts, of pillar and bath taps behind basins, sinks and baths. Manufactured from strong malleable material, the 327R wrench has correctly machined jaws to fit standard nuts, 15 and 22mm. The offset design allows you to reach behind both sinks & baths easily. Specification: Capacity: 1/2 and 3/4in BSP. Overall Length: 260mm.

Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"This unique device enables accurate fixing in overhead or awkward positions without the necessity of pre-drilling. The in-built spring also allows for countersinking. The surface of the screw head is held on by an additional ultra strong, powerful rare earth magnet allowing for vertical or horizontal screwing without slippage. Allows precision screwing with a single hand operation, saving time. The in-built spring allows for countersinking. Suitable for use with all 25mm driver bits. The bits retract within the mechanism allowing the screw to magnetically attach to the end of the holder. Suitable for use with all standard 1/4"" insert bits. German made, premium quality."

The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life. Irwin Lock-n-Load™ Quick Change Extension Bit Holder Specification: Insert bit: Standard 1/4 inch. Length: 150mm.

"Popular range of precision made blades designed for a variety of applications. Ideal for cuts in wooden exteriors. For fast, rough cuts and tree pruning. Hardened teeth for extra durability."

The Vitrex 10 1490 Heavy-Duty Tile Cutter is fitted with a tungsten carbide wheel (10mm) for scoring and snapping ceramic tiles up to 10mm thick. The body is manufactured from heavy-duty steel and is fitted with plastic hand grips for extra comfort during use. Suitable for straight and freehand cutting. Spare Parts Kit available. (VIT101493)

The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch. Input Power: 25W. Glue Sticks: 11.3mm Dual Melt.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling. Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe. The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System. Bit Size: 6mm.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in Shank Cutting Diameter: 15.9 mm 5/8in. Cutting Length: 50 mm. Shank Diameter: 1/2in.

The Faithfull natural stiff Bassine broom heads provide an all-round good sweeping performance. They are designed for dry use. These broom heads come complete with a handle and stay. This Faithfull Stiff Bassine Broom has the following specification: Head Width: 450mm (18in) Handle Length: 137cm

The Faithfull Soft Coco Broom is a by-product of coconut harvesting. Natural coco brushes are softer when compared to other natural brooms, but still provide good sweeping characteristics. This broom should only be used in dry conditions.

The Faithfull solid tungsten carbide planer blades are designed for use with portable electric planers with an 82mm cutting block and suitable clamping system. Blades are manufactured from high quality tungsten carbide and provide excellent performance in both timber and man-made boards. Blades are supplied in pairs and are reversible to provide an extended working life. Length: 82mm Width: 5.5mm Thickness: 1.2mm Note some planers may require the use of a conversion kit to use this type of blade, please refer to your manufacturer's instructions for details

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK. The Faithfull S1531L Sabre Saw Blades are ideal for coarse fast cuts in wood (tree cutting and pruning). Specification: Length: 240mm Teeth: 5 TPI

The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails. The DEWALT DT10624QZ Cordless Extreme Framing Circular Saw Blade has the following specifications: Blade Diameter: 165mm. Bore Size: 20mm. Tooth Count: 24.

The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF. The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides. This Bahco 244P-20-U7-HP Barracuda Handsaw has the following specification: Blade Length: 500mm (20in). Tooth Pitch: 7 TPI. Type: Universal hard point.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

This Vitrex 10 2906 is a Professional 20mm Adhesive Round Notch Trowel, it has a rust resistant stainless-steel blade and a large, contoured handle with a soft grip to ensure comfort over prolonged use. The solid aluminium shank has 9 rivets and is designed to be used by the professional installer. Specifications: Blade Size: 115 x 280mm. Round Notches: 20mm. Vitrex Professional Notched Adhesive Trowel. Size: 115 x 280mm (11 x 4.1/2in) Square Notches: 6mm

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

Stanley 8 Piece TORX Key Folding Set with a bi-material grip for increased comfort. Chamfered tip to aid location. Phosphate finish for corrosion protection. Sizes: TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40.

Bahco ERGO™ Handled Engineering File for filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work. This Bahco ERGO™ Handled Engineering Square File has the following specification: Size: 250mm (10in) Cut: Smooth Cut File Width: 8mm Teeth per cm: 15

The curved claw head is made from forged, heat-treated steel and the oval tubular steel shaft combines strength with a lightweight feel. The flock filled vinyl grips are impervious to heat, oil and most solvents. Weight: 454g (1 lb).

The Faithfull High Speed Steel Rosehead Chubby 90° included angle Countersink is used for countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. They are also suitable for working on wood, plywood, MDF, and other man-made boards. They can be used in both hand tools, and power drills. Specifications: Type: Rosehead - Chubby. Size: 13mm (1/2in). Shank Diameter: 6mm (1/4in).

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.