Tools & Site Equipment

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in 3 grades: Green (hard): for hardwoods, brickwork and plastered walls. Red (medium): for general carpentry. Blue (soft): for softwoods and newly felled timber.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work Don't use Depressed Centre cutting discs as grinding wheels

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in 3 grades: Green (hard): for hardwoods, brickwork and plastered walls. Red (medium): for general carpentry. Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in 3 grades: Green (hard): for hardwoods, brickwork and plastered walls. Red (medium): for general carpentry. Blue (soft): for softwoods and newly felled timber.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

The Vitrex 33 7150 Decorating Gloves are lightweight and comfortable made from polyester. They keep hands clean when painting or using harsh chemicals. The gloves are ideal for painting and sanding down in areas where there is no risk of skin exposure in toxic substances. Conform to EN420:2003, EN388:2003, A1:2003.

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Scan Nitrile Coated Knitted Gloves are resilient to both grease and fuel, making them ideal for handling small oily parts. The tough palm and finger nitrile coating provides effective abrasion and puncture resistance. A 13g knitted seamless polyester liner improves comfort. Conforms to EN420 and EN388 Standards.

The Vitrex 10 2280 Grout Finisher is a double ended finisher, with a ball end, producing a neat grout line. It has a scraper end for removing excess grout. The VIT10 2280 is easy to clean.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 5mm. Working Length: 50mm. Overall Length: 85mm.

The Sharpie® Fine Tip Permanent Marker will write on most surfaces and has a 1mm tip. It is ideal for everyday use at home, on the job site, etc. The high-quality ink dries quickly and resists both fading and water. The cap quickly identifies the colour inside, there is also a handy clip that allows the marker to be attached to a pocket or folder.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 2.0mm. Working length: 24mm. Overall length: 49mm.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

This Stanley 028590 Window Scraper is ideal for removing excess paint, glue, stickers etc from windows. It has a strong yellow plastic handle for a long life. Supplied with 1 x heavy duty knife blade, and it uses a standard Stanley 011921 trimming knife blade. Specifications: Length: 170mm. Blade Width: 60mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 6mm. Working Length: 52mm. Overall Length: 92mm.

The Vitrex Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.

FEATURES General purpose heavy duty blades in dispenser High quality SK2 steel Extra flexible and durable 10 pack

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 1.0mm. Working length: 12mm. Overall length: 34mm.

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible. These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade.

Reversible sharpened double hook with point for penetrating and cutting sheet material, in particular floor covering and plastic sheeting as used in the packaging industry.

FEATURES Semi synthetic two-stroke oil one shot This will meet the lubrication requirements of all modern static two-stroke engines Suitable for use with most horticultural, garden & domestic 2 stroke engines Readily mixes with fuel

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 3.00mm. Working length: 33mm. Overall length: 61mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 8mm. Working Length: 75mm. Overall Length: 120mm.

Type 53 light-duty staple. Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker. Size: 6mm Qty: 1000

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

These Stanley Spare Blades are to fit the Stanley Junior Hacksaw.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 1.50mm. Working length: 18mm. Overall length: 40mm.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

The Faithfull Double Scaffold Spanner Holder is made to a high specification using quality heavy-duty hide. This Faithfull holder is made to last and provide dependable service. It has two loops for scaffold spanners or socket bars, the holder will fit most belts. Specification: Size: 150 x 100mm (6 x 4in).

Type 53 light-duty staple. Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker. Size: 8mm Qty: 1000

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA704T Heavy-Duty Staples 6mm

The Vitrex Combination Spreader has a convenient dual purpose design. With a notched edge for fast adhesive application and a squeegee edge for rapid grouting.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

The Vitrex Tapered Disposable Earplugs are made from foam and shaped for easy insertion. Their smooth outer surface ensures better hygiene. Suitable for most DIY and power tool applications. Tested to European Standard EN352 Part 2. CE Approved. SNR Rating: 33 dB 5 Pairs of Vitrex Tapered Disposable Earplugs

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together. The Faithfull Cable Ties have the following specifications: Colour: Black. Length: 150mm. Width: 3.6mm. Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together. The Faithfull Cable Ties have the following specifications: Colour: White. Length: 150mm. Width: 3.6mm. Pack Quantity: 100.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible. These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade. Specifications: Blade length: 62mm. Blade thickness: 0.65mm. Blade height: 19mm. Pack Qty. Dispenser of 10

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

"Popular range of precision made blades designed for a variety of applications. Wood to 60mm, plastics. Coarse fast cut HSS."

"Popular range of precision made blades designed for a variety of applications. For tight curved cuts in hardwoods, softwoods, plywood, chipboard, synthetic materials and acrylic glass."

Type 53 light-duty staple. Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker. Size: 10mm Qty: 1000

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA705T Heavy-Duty Staple 8mm

Scan Knitshell Latex Palm Gloves are an essential garment for the protection of hands and offer maximum user comfort. Ideal for many work situations, they provide protection against minimal cuts and abrasions. The gloves have a durable non-slip latex coating which provides excellent protection and grip. Knitted wrists ensure comfort. Conforms to EN 388:2016 and EN ISO 21420 standards. Abrasion Performance Index (1-4): 2 Blade Cut Performance Index (1-5): 1 Tear Performance Index (1-4): 4 Puncture Performance Index (1-4): 1

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 3.50mm. Working length: 39mm. Overall length: 70mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 2.50mm. Working length: 30mm. Overall length: 57mm.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

The Faithfull unvarnished Hand Scrubbing Brush has stiff, short bristles, is ideal for general cleaning and for removing stubborn marks on most surfaces.

FEATURES Features a warm acrylic 10 gauge liner so ideal for working in cold conditions Also suitable for more heavy outdoor tasks Conforms to EN388 standards Size 9 / Large

FEATURES Sleek styling and lightweight design Padded temples ensure comfortable wear Polycarbonate lenses provide protection from impact and block harmful UV rays Conform to EN167 Smoked Lens

FEATURES Sleek styling and lightweight design Padded temples ensure comfortable wear Polycarbonate lenses provide protection from impact and block harmful UV rays Conform to EN166 Clear Lens

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

This Vitrex 10 2962 is a Large Tile Squeegee for faster grouting. It has a strong flexible plastic blade with a squeegee edge for rapid grouting and the handle is contoured for extra comfort.

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:. Tip Size: PH0. Blade Length: 75mm (3in).

Monument pipe cutter wheels are made from high quality, heat treated steels. Monument 273A Spare Wheel for Tube Cutters size 0 , 1 , 2A, TC3. General purpose for copper, brass and aluminium tube.

The Faithfull Pencil Marking Refills are for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth. Supplied in a sliding storage case to protect the refills from breakage. Contains: 3 x Red Refills and 3 x Yellow Refills.

The Faithfull Black Pencil Marking Refills for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth. Supplied in a sliding storage case to protect the refills from breakage.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics. These Faithfull (T111C) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood and plastics.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA706T Heavy-Duty Staple 10mm

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments. Wire gauge is 28, hardened and tempered . 3 Row.

Faithfull plastic dustpan complete with a soft bristle PVC banister brush, helps to make cleaning up a simpler task. Clip-in brush for compact storage. Specification Width: 220mm (8.3/4in)

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

These Faithfull Standard Padsaw Blades are designed to fit most brands of padsaws, keyhole saws and pocket saws. They are made from high quality tempered carbon silicon steel and are suitable for cutting wood, plastic and plasterboard. Specifications: Length: 250mm (10in). Pack Quantity: 2.

The Vitrex 10 2283 Flexi-Tip Sealant Smoother has a unique flexible tip for superb results on any surface. It is ideal for kitchens, bathrooms, showers, window frames etc. It is perfect for smoothing most household sealants, fillers, grout etc. and is simple to use and easy to clean.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 4.0mm. Working length: 43mm. Overall length: 75mm.

3-IN-ONE is a specially formulated lubricating, penetrating and cleaning oil. 3-IN-ONE's unique set of ingredients enable it to lubricate as well as protect metal surfaces, on nuts and bolts, hand and power tools, bearings, locks, fans, firearms, bicycles, rollers, wheels, drill bits, saw blades, ladders, seals, bearings, shafts, trailer hitches, skateboards, and moving parts...nearly everything that moves. Since 1894, 3-IN-ONE's versatile multi-purpose drip oil has been a trusted tool used by professional tradesmen and do-it-yourselfers to lubricate moving parts, penetrate rust, clean and protect tools, and much more. Its precise, easy-to-use drip spout enables precise application, with no over spray or splatter, and its updated packaging has a fill level indicator strip that shows you when you're running low. 3-IN-ONE oil can be used to lubricate tools, hinges, nuts and bolts, bicycles, wheels, fans and many other moving parts. Lubricate hinges to keep them from squeaking Loosen rusted nuts, bolts, and screws Lubricate stuck locks Prevent rust and corrosion Extend the life of hand and power tools Bicycle maintenance Maintain and lubricate garage door parts Keep drill bits and saw blades cool Lubricate wheel bearings Clean and lubricate trailer hitches Lubricate fan bearings Restore garden shears and snips

The Stanley FatMax® VDE Insulated Voltage Tester has an insulated plastic handle for complete safety. Its blade is made from chrome vanadium steel for long life. Tip: Parallel 3 x 65mm.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together. The Faithfull Cable Ties have the following specifications: Colour: Black. Length: 200mm. Width: 3.6mm. Pack Quantity: 100.

This 2-in-1 plastic funnel features a brass filter to prevent the ingress of unwanted matter and a 13in detachable flexible nylon spout.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together. The Faithfull Cable Ties have the following specifications: Colour: White. Length: 200mm. Width: 3.6mm. Pack Quantity: 100.

The Masterlock Twin Wire Bungee Cord offers twice the strength of an ordinary bungee and its rounded hooks eliminate the risk of scratching. The reverse hook bends away allowing more room to attach. TUV certified. The MasterLock Twin Wire Bungee Cords have the following specification: Length: 60cm. Diameter: 8mm Resistance Limit: 40kg. Colour: Red. Quantity: 2 Piece.

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point. Point Diameter: 2.5mm (3/32in). Length: 100mm (4in).

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point. Point Diameter: 3mm (1/8in). Length: 100mm (4in).

These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator. Size: 4 in.

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood. Point Diameter: 4.0mm (5/32in) Length: 100mm (4in)

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood. Point Diameter: 5mm (3/16in) Length: 100mm (4in)