Tools & Site Equipment

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 150mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 150mm.
Width: 3.6mm.
Pack Quantity: 100.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

Universal Plunger

Builds up pressure of water which forces the obstruction clear.

Size 150mm (6 in).

The Faithfull Double Scaffold Spanner Holder is made to a high specification using quality heavy-duty hide. This Faithfull holder is made to last and provide dependable service.
It has two loops for scaffold spanners or socket bars, the holder will fit most belts.

Specification:

Size: 150 x 100mm (6 x 4in).

The Vitrex Tapered Disposable Earplugs are made from foam and shaped for easy insertion. Their smooth outer surface ensures better hygiene. Suitable for most DIY and power tool applications.

Tested to European Standard EN352 Part 2. CE Approved.
SNR Rating: 33 dB

5 Pairs of Vitrex Tapered Disposable Earplugs

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

Stanley Aluminium Rivets - Available in short, medium and long lengths.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA704T Heavy-Duty Staples 6mm

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The STA1GS10DT Dual Temp Glue Sticks have the following specifications:

Length: 100mm (4 inches).
Diameter: 7mm.

Pack of 24.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 6.3 mm 1/4in.

Cutting Length: 16 mm.

Shank Diameter: 1/4in.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

The Vitrex Combination Spreader has a convenient dual purpose design. With a notched edge for fast adhesive application and a squeegee edge for rapid grouting.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 1.50mm.
Working length: 18mm.
Overall length: 40mm.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.

Size: 4 in.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

These Stanley Spare Blades are to fit the Stanley Junior Hacksaw.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 8mm.
Working Length: 75mm.
Overall Length: 120mm.

Type 53 light-duty staple.

Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker.

Size: 6mm

Qty: 1000

FEATURES

Semi synthetic two-stroke oil one shot
This will meet the lubrication requirements of all modern static two-stroke engines
Suitable for use with most horticultural, garden & domestic 2 stroke engines
Readily mixes with fuel

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 2.50mm.
Working length: 30mm.
Overall length: 57mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 3.00mm.
Working length: 33mm.
Overall length: 61mm.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 1.0mm.
Working length: 12mm.
Overall length: 34mm.

FEATURES
General purpose heavy duty blades in dispenser
High quality SK2 steel
Extra flexible and durable
10 pack

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 6mm.
Working Length: 52mm.
Overall Length: 92mm.

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible. These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade.

Reversible sharpened double hook with point for penetrating and cutting sheet material, in particular floor covering and plastic sheeting as used in the packaging industry.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Type 53 light-duty staple.

Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker.

Size: 10mm

Qty: 1000

The Vitrex Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 5mm.
Working Length: 50mm.
Overall Length: 85mm.

This Stanley 028590 Window Scraper is ideal for removing excess paint, glue, stickers etc from windows. It has a strong yellow plastic handle for a long life.
Supplied with 1 x heavy duty knife blade, and it uses a standard Stanley 011921 trimming knife blade.

Specifications:

Length: 170mm.
Blade Width: 60mm.

The Sharpie® Fine Tip Permanent Marker will write on most surfaces and has a 1mm tip. It is ideal for everyday use at home, on the job site, etc. The high-quality ink dries quickly and resists both fading and water. The cap quickly identifies the colour inside, there is also a handy clip that allows the marker to be attached to a pocket or folder.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 2.0mm.
Working length: 24mm.
Overall length: 49mm.

The Vitrex 10 2280 Grout Finisher is a double ended finisher, with a ball end, producing a neat grout line. It has a scraper end for removing excess grout. The VIT10 2280 is easy to clean.

Scan Nitrile Coated Knitted Gloves are resilient to both grease and fuel, making them ideal for handling small oily parts. The tough palm and finger nitrile coating provides effective abrasion and puncture resistance. A 13g knitted seamless polyester liner improves comfort.

Conforms to EN420 and EN388 Standards.

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Type 53 light-duty staple.

Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker.

Size: 8mm

Qty: 1000

The Vitrex 33 7150 Decorating Gloves are lightweight and comfortable made from polyester. They keep hands clean when painting or using harsh chemicals.
The gloves are ideal for painting and sanding down in areas where there is no risk of skin exposure in toxic substances.

Conform to EN420:2003, EN388:2003, A1:2003.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications.

Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work
Don't use Depressed Centre cutting discs as grinding wheels

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications.

Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work