Tools & Site Equipment

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following:

1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving.

Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/34,000/bpm.
Torque: 27/70Nm, 15 Settings.
Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in).
No Load Speed: 0-1,000/0-2,800/0-3,250/min.
Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.
Max. Torque: 26/80/205Nm.
Weight: 1.56kg.

1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools.

No Load Speed: 0-20,000/min.
Length: 310mm.
Weight: 1.06kg.

1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

Modes: Rotary, SDS Hammer, Chisel Only.
No Load Speed: 0-1,100/min.
Impact Rate: 0-4,600/bpm with 2.1 joules
Capacity: Wood 26mm, Metal 13mm, Masonry 24mm
Weight: 3.1kg

1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle
Weight: 1.75kg

1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

No Load Speed: 5,500/min.
Max. Cutting Depth: @90º 64mm
Blade: 184 x 16mm Bore
Bevel Capacity: 57°

1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Strokes No Load: 0-3,200/min.
Stroke Length: 26mm
Bevel Capacity: 0-45°
Capacity: Wood 135mm, Metal 10mm
Weight: 2.1kg

Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK™ VI Deep Toolboxes (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Carrier Base (171229)

The DEWALT DCW604 XR Twin Base Router has been designed to be powerful yet heavy-duty. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. The aluminium motor housing enables the router to be quickly transformed into a fixed base attachment enabling for increased versatility.

The variable speed ranges enable the router bit to be optimised depending on application and material type. The 5-position adjustable turret enables for stepped or repeated plunges. The spindle lock offers quick and easy router bit change, saving time.

Soft start reduces movement of the tool on startup increasing user control. There is an electronic brake for added control and safety. Rubber overmould grips make using the unit more comfortable. Dual LED lights increase visibility around the router bit during operation for increased accuracy.

Supplied with a TSTAK™ Kitbox.

Bare Unit, No Battery or Charger Supplied.

Specifications:

Collet: 8mm (1/4in).
No Load Speed: 16,000 – 27,000/min.
Plunge Depth: 55mm.
Max. Cutter Diameter: 30mm.

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following:

1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools.

Chuck: 10mm Keyless.
No Load Speed: 0-425/0-1,500/min.
Max. Torque: 57.5Nm, 15 Settings.
Capacity: Wood 20mm.
Weight: 0.9kg.

1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools.

No Load Speed: 0-950/0-1,950/0-2,850/min.
Impact Rate: 0-3,600/bpm.
Max. Torque: 163Nm.
Bare Unit Weight: 0.8kg.

Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box.

The DEWALT DCK218D2T XR Twin Pack, contains the following:

1 x 12V DCD716 Combi Drill is an excellent solution for sub-compact performance and power. Has a high torque output of 30Nm and can drill into masonry. 2-speed transmission ensures easy work of light application. Single clutch collar with 16 adjustable torque control settings.

No Load Speed: 0-1,500/0-4,000/min.
Impact Rate: 22,500/bpm.
Max. Torque: 30Nm.
Torque Settings: 16.
Capacity: Metal: 10mm, Masonry: 8mm, Wood: 20mm.

1 x 12V DCF815 Impact Drill with all metal gearing for efficient power transmission and long life. Aluminium front housing provides greater heat dispersion increasing motor life. Parabolic switch profile allows for greater control over speed. 6.35mm 'drop in' key-less hex driver which allows for quick fitment.

Bit Holder: 6.35mm (1/4in).
No Load Speed: 2,450/min.
Impact Rate: 3,400/min.
Max. Torque: 107Nm.
Capacity: Bolt M12.

"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."
"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

Specifications:

No Load Speed: 5,500/min.
Max Cutting Depth @90º: 64mm.
Blade: 184mm, 16mm Bore.
Bevel Capacity: 57°.

The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.

Welded steel construction.
250 x 250mm platform.
Rubberised feet provide slip resistance and floor protection.
80mm wide steps for extra comfort.
Powder coated grey for neutral wipe clean protection.
EN131 - 125Kg rating for - DOMESTIC USE ONLY.

The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts.

Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Bare Unit, No Battery or Charger Supplied.

Specifications:

Strokes at No Load: 0-3,200/min.
Stroke Length: 26mm.
Bevel Capacity: 0-45°.
Capacity: Metal 10mm, Wood 135mm.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall.

The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

Specifications:

No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle.

The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application.

Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas.

The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family.

Supplied with:

2 x 18V 2.0Ah Power X-Change Li-ion Batteries.
1 x Power X-Change Li-ion Charger.
1 x Carry Case.

Specifications:

Drill Chuck: Single Sleeve 13mm.
No Load Speed: 0-400/0-1,500/min.
Impact Rate: 0-6,400/0-24,000/bpm.
Max. Torque: 48Nm.
Torque Settings: 23.
Charging Time: 80min..
Weight: 1.5kg.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete.

The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations.

Compatible with all other Power X-Change tools and batteries.

Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case.

Specifications:

Modes: Screwdriving, Drilling, Hammer Drilling In Concrete.
No Load Speed: 0-1,100/min.
Impact Rate: 0-5,700/bpm with 1.2 joules.
Capacity: Concrete 12mm.
Charging Time: 30 Minutes.

Welded steel construction.
250 x 250mm platform.
Rubberised feet provide slip resistance and floor protection.
80mm wide steps for extra comfort.
Powder coated grey for neutral wipe clean protection.
EN131 - 125Kg rating for - DOMESTIC USE ONLY.

The Einhell GE-CM 18/30 Li Power X-Change Lawnmower is recommended for lawns of up to 150m² in size. Fitted with a brushless motor for increased power and longer run time than a conventional carbon brush motor. Its high-quality impact-resistant plastic housing also increases product lifetime. For practical mowing, there is a 3-level axial cutting height adjustment facility.

A folding long handle enables storage in minimum space. For easy transportation, there is an integrated carry handle. Its large wheels put less stress on the lawn while mowing.

The battery provides the mower with a speed of up to 3,500 rpm, with a cutting width of 30cm. A battery charge level indicator with three LEDs makes it easy to keep a constant eye on the remaining power.

Supplied with: 1 x 18V 3.0Ah Li-ion Battery and 1 x Charger.

Specification:

Cutting Width: 30cm
Cutting Height Adjustment: 3 Stages, 30-70mm
Grass Box Capacity: 25 litre
Wheel Diameter: Front 140mm, Rear 140mm

No Load Speed: 0-3,100/min.
Max. Torque: 172Nm.
Capacity: Screw 4-10mm, Bolt M5-M16, HT Bolt M5-M12.

The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools.

The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work.

Specifications:

No Load Speed: 0-20,000/min.
Length: 310mm.

DEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit.

Supplied WITHOUT batteries or a charger.

The OX Pro Speedskim' SF 1200 features a tough aluminium handle and ultra-fine 0.3mm stainless steel blade for fine finishing of plaster, drywall, and tape & jointing, and is part of the new and revolutionary tool system designed to increase meterage output and enhance quality of finish. Compatible with all gypsum-based finishing plasters (both hand and spray applied), jointing systems and compounds, it comes complete with an integral blade guard. One of Speedskim's major benefits is the reduction in harmful effects of fatigue & RSI.

FEATURES

Speedskim' is the new and revolutionary tool system designed to increase meterage output and enhance quality of finish ' at the same time significantly reducing the harmful effects of fatigue & RSI
Ultra-fine 0.3mm stainless steel blade
Fine finishing of plaster, drywall & tape & jointing
Compatible with all gypsum based finishing plasters (hand and spray applied), Jointing systems and compounds
Complete with integral blade guard

"Safety Rigger Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof membrane system Rubber heel counter Ankle support Fitted leg stem Wider fitting Triple stitched seams Pull on loop Shaped collar K3 Rubber Outsole Breathable lining"

"Safety Rigger Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof membrane system Rubber heel counter Ankle support Fitted leg stem Wider fitting Triple stitched seams Pull on loop Shaped collar K3 Rubber Outsole Breathable lining"

"Safety Rigger Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof membrane system Rubber heel counter Ankle support Fitted leg stem Wider fitting Triple stitched seams Pull on loop Shaped collar K3 Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Neoprene Buckbootz Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Cold insulation certified to -17°C for 30 minutes Heat insulation certified to 150°C for 30 minutes Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Reflective enhancement 5mm neoprene with rubber protection Aerospencer breathable high visibility lining Kick-off heel spur Detachable washable insole K3 Rubber Outsole Aerospencer breathable lining"

FEATURES
Guaranteed to cut all construction products including metal
Excellent fast cut on universal & hard materials
Reinforced flange
Cooling holes
Semi-transparent
Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools.

For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices.

Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger.

Specifications:

Strokes at No Load: 0-2,700/min.
Stroke Length: 20mm.
Bevel Capacity: 0-45°.
Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Wider fitting Dual thickness rubber scuff toe protector Rubber heel kick-off spur Tough and durable Goodyear welted construction Triple stitched uppers Riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective piping Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

"Safety Hybridz Boot Safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof and Triple stitched uppers Waterproof elastic Reflective inserts Unique lace/dealer boot combination Anti-scuff toe protector Notched padded collar Ankle support heel piece Buckshot Rubber Outsole Breathable lining"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate. suitable for wet and dry cutting. Applications: guaranteed to cut porcelain, all hard stone and all ceramic tiles. Mesh segment design ensures minimal chipping of material during cutting. Cooling holes for fast effective heat reduction to ensure the stability of the centre plate whilst cutting extremely hard materials. Brand new ox photo quality screen-print ensures ultimate visibility on shelf and clear overview of blade usage.

FEATURES

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate
Suitable for wet and dry cutting of porcelain, stone and other hard tiles
Mesh segment design ensures minimal chipping of material during cutting

Input Power: 1,100W.
No Load Speed: 3,450/min.
Blade: 216 x 30mm Bore.
Turntable Setting (Left/Right): 47°/47°.
Max. Cutting Width: 90°/45°: 120/80mm.
Max. Cutting Depth: 90°/45°: 60/45mm, 90°/90°: 120x60mm.
Double Mitre 45°/45°: 80x45mm.
Cable Length: 2m.

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety High-Leg Lace Boot Safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Anti-scuff toe protector Heel & ankle support Notched collar Drivers flex heel piece Double & quadruple stitched uppers Buckshot Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.
It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide.

Cutter seats at 21 degrees.

Length: 6.1/4in.
Cutter width: 1.5/8in.

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective piping Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting.

Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places.

The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use.

Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key.

Specifications:

Input Power: 200W.
No Load Speed: 30,000-42,000/min.
Oscillating Angle: 3°.
Sandpaper Size: 93 x 93 x 93mm.

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide.
The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided.

Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor.

Specifications:

Input Power: 1,230 Watt.
No Load Speed: 5,000/min.
Blade: 160 x 16mm Bore, 24 Tooth TCT.
Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

Welded steel construction.
250 x 250mm platform.
Rubberised feet provide slip resistance and floor protection.
80mm wide steps for extra comfort.
Powder coated grey for neutral wipe clean protection.
EN131 - 125Kg rating for - DOMESTIC USE ONLY.

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

The DEWALT XR Slide Li-ion Battery Pack offers extended run time and optimised power to complete applications quickly. No memory effect and virtually no self-discharge for maximum productivity and less downtime. A LED state of charge indicator helps to manage charging/working time.

Compatible with all 18V XR slide on tools and XR chargers.

The DEWALT DCB182 XR Slide Li-ion Battery Pack offers extended runtime and optimised power to complete applications quickly. The lightweight design provides the user with upgraded 4Ah Power without increasing the size or weight. The battery has no memory effect and virtually no self-discharge, ensuring maximum productivity and less downtime.

It is fitted with a LED State of Charge Indicator that helps to manage charging times. The battery pack has excellent electrical characteristics and is compatible with all DEWALT 18 Volt tools that except slide-on type batteries.

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective inserts Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective inserts Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

Faithfull Sledge Hammer for general use, ideal for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection.

Lightweight But Sturdy Aluminium
Conforms To EN131 Safety Standard
Up To 150kg (23.5 Stone) Load

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

FEATURES
Guaranteed to cut all construction products including metal
Excellent fast cut universal & hard materials
Reinforced flange
Cooling holes
Semi-transparent
Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Strokes at No Load: 0-3,000/min.
Stroke Length: 22mm.
Sound pressure (LpA): 79.5 dB(A).
Blade Length: Up to 30cm Long.
Plus a 1.5Ah Li-Ion Battery.

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

Contains the following sizes: 6, 10, 12, 19, 25, 32, 38 and 50mm (1/4, 3/8, 1/2, 3/4, 1, 1.1/4, 1.1/2 and 2in).

"Variable pitched bi-metal holesaw for multi-use. Features a smooth and fast cutting action. Aggressive penetration and swarf clearance."

The OX Pro Ultraflex Finishing Trowel 16" gives plaster surfaces the perfect finish with its 0.3mm ultra flexible blade, lightweight design, and comfort grip handle. Its unique twin blade technology and rounded corners help eliminate trowel lines. Its riveted handle offers added strength and durability.

FEATURES

Ultra-flexible 0.3mm stainless-steel blade providing the perfect finish
Lightweight fully fastened shank for superior balance and strength
Unique twin blade technology suitable for plaster finishing or smoothing concrete.
Rounded corners to ensure a smooth finish
Ergonomic soft grip handle to reduce fatigue and increase comfort

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in.

Features:

Replaceable blade and punch.

Punch diameter: 3.2 mm (1/8in).

Cutting length: 35 mm per single pressure.

Cutting width: 2.8 mm (0.109in).

The OX Pro 14" Semi Flex Plastic Finishing Trowel features tough but lightweight shank with a replaceable plastic blade. For ease of use and comfort, it comes with an ergonomic soft grip handle.

FEATURES

Replaceable plastic blade system
Lightweight shank design
Ergonomic soft grip handle

Faithfull heavy-duty crowbars, manufactured from high-grade heat-treated steel bar. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.

The OX Pro Ultraflex Finishing Trowel 14" gives plaster surfaces the perfect finish with its 0.3mm ultra flexible blade, lightweight design, and comfort grip handle. Its unique twin blade technology and rounded corners help eliminate trowel lines. Its riveted handle offers added strength and durability.

FEATURES

Ultra-flexible 0.3mm stainless-steel blade providing the perfect finish
Lightweight fully fastened shank for superior balance and strength
Unique twin blade technology suitable for plaster finishing or smoothing concrete.
Rounded corners to ensure a smooth finish
Ergonomic soft grip handle to reduce fatigue and increase comfort

Aluminium folding square with 90° and 45° for versatility of job applications.
Ideal for large scale setting out of building profiles, foundations , floor tiling, paving etc.

Durable yet lightweight aluminium construction.
Folds into a single length for easy storage.

Size: 48 x 48 x 68in (122 x 122 x 172cm)

The Faithfull FAITRESTLESP is a pair of plastic trestles which fold flat for easy storage and transportation.
The top features flip-up safety pegs to secure the workpiece and rubber inserts to prevent the workpiece slipping. They have non-slip rubber feet.

Specifications:

Height: 82 cm (32.1/4in).
Length: 57 cm (22.1/2in).
Width: 3cm (1.1/4in).
Maximum recommended capacity: 158kg (348lb) per pair.

"Hardened steel hammer masonry drill bits for general purpose applications. SDS+ shank. Super flute spiral aids consistent drilling speed and efficient debris removal. Tungsten carbide tipped for longer life. Hardened steel body for extra strength and reduced breakage. Suitable for masonry, concrete and stone."

"BAZ Safety Lace Boot Lightweight composite safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Electrostatic discharge (ESD)"

"BAZ Safety Lace Boot Lightweight composite safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Electrostatic discharge (ESD)"

This 60 1/2 Block Plane features a low angle cutter seat at 13.5° and is fully adjustable for depth-of-cut, cutter alignment and size of mouth. The body is made from a fine grey iron.
Particularly effective on end grain and plastic laminates.
Supplied with a pouch for convenient storage.

Cutter Width: 35mm.
Length: 150mm (6in).

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock.

The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements.

Accuracy: ± 0.5mm/m

Length: 180cm.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

The Marshalltown M48D gauging trowel solid forged from high grade tool steel and carefully taper ground and polished. Used primarily for measuring, mixing and applying small quantities of cement. The DuraSoft® handle provides a soft feel, reduces fatigue and offers excellent durability.

Size: 180 x 86mm (7 x 3.3/8in).

The OX Pro Stainless Steel Plasterers Trowel - 5in x 18in / 127 x 457mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance.
FEATURES
Pre-worn edges to eliminate line & ripple marks
High quality tempered stainless steel blade
Lightweight aluminium shank - fully riveted
Handle set for perfect balance
Duragrip handle for ultimate comfort

The Monument GRIP+ Adjustable Basin Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.
The teeth on the jaws will grip uneven shapes etc.

The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach.

Correct heat treatment of all components ensures a long life.

Made in Britain.

Offering the same sturdy construction and traditional styling of our Contractor, the Builder adds to this a larger 90L pan for moving larger loads. An excellent choice for any application.

FEATURES
The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

"Precision engineered, high speed ground steel countersink bits. Manufactured to DIN335C standards. Vibration free working. Suitable for use on metal/mild metal, non ferrous metals, aluminium, sheet metal, veneered wood, laminated chipboard and PVC."

For professional people who require their tools to be at hand on a regular basis, this purpose designed set comes complete with a heavy-duty blue waterproof Bailey carry bag and supplied with adjustable shoulder straps. The compact nature of this set allows them to be easily stored in the works, shed, garage or van.

This Universal Drain Rod set includes 30 feet of the Bailey Blue Rods® with brass fittings.

The quality, reliability and strength of this equipment ensures that the toughest jobs can be tackled - an essential product for the builder, plumber, chimney sweep or handyman.

Contains:

10 x Blue Rods 3ft x 3/4in
1 x Plunger 4in
1 x Drop Scraper 4in
1 x Double Worm Screw

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock.

The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements.

Accuracy: ± 0.5mm/m

Length: 120cm

The Faithfull Posthole Digging Bar manufactured from high-grade heat treated steel bar, with a round shank. It has a 60mm (2.3/8in) mushroom head at one end and a 64mm (2.1/2in) bevelled chisel edge at the other. Frequently used for digging deep post holes, and the mushroom head is used for tamping down.

The Olympia Tools® Circular Saw is fitted with a powerful 1,200W motor and an adjustable steel base for cutting bevels up to 45°. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue.

Supplied with: 1 x TCT Saw Blade 160 x 20mm, 1 x Parallel Cutting Guide, 1 x Hex Key and 1 x Pin Spanner.

Specifications:

Input Power: 1,200W.
No Load Speed: 4,800/min.
Max. Cutting Depth: @90° 52mm, @45° 37mm.
Blade: 160 x 20mm Bore.
Bevel Capacity: 0-45°.

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The Irwin Jack JAK880UN20 880 UN Universal Panel Saw comes with the following specification:

Length: 500mm (20in)
Teeth: 8 TPI

The Black & Decker BDCDD12 Ultra Compact Drill Driver is ideal for use in hard to reach, confined areas. Provides precise control for drilling into wood, metal, plastic and all screwdriving tasks. With fingertip variable speed control for all drilling and screwdriving applications.

It has an anti-slip soft-grip for additional comfort and an LED work light to illuminate dark working areas. Uses a spring loaded battery system for quick and simple battery change whilst also providing a secure fit. The Lithium Ion battery holds over 80% of its charge over 90 days whilst idle. No need to charge unit before each use.

Ideal for all drilling tasks in wood up to 25mm and Metal up to 10mm. Also for building flat pack furniture, hanging pictures, shelves, curtain rails and blinds.

Supplied with 1 x 10.8V 1.5Ah Li-ion Battery and 1 x 8 Hour Charger.

Specification

Chuck: 10mm, 2 Sleeve.
No Load Speed: 0-550/min.
Max Torque: 12.5/26Nm, 11 Settings.
Capacity: Wood 25mm, Steel 10mm.
Sound pressure (LpA): 63 dB(A).

The Merchant shares much of it's design with our bestselling wheelbarrow, the Contractor, but offers a tubular front support to improve weight distribution and increase the overall strength.

Faithfull Digging Bar manufactured from high grade heat treated steel bar with a hexagonal shank. It has one diamond point and one bent chisel point (2in). The bent chisel, or slate bar, can be used for breaking rocks or as a lever for moving heavy objects.

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime.

Supplied with: 1 x Blade for Metal Cutting and 1 x Hex Key.

Specifications:

Input Power: 900W.
Strokes at No Load: 0-2,800/min.
Stroke Height: 20mm.
Max. Cutting Depth: Wood 115mm, Steel 8mm.

These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J-style fixing hooks ensure that loads are secured quickly and efficiently and provide ease of use.

Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/daN.


Pack quantity: 1.

Manufactured in accordance to EN12195-2.
NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT.

The Faithfull FAITDTRUCK52 has the following specifications:
Length: 5m
Width: 50mm
Breaking strain: 4,000kg/daN
Maximum working load: 2000kg/daN

The Stanley 0TR250 Heavy-Duty Staple & Nail Gun is fitted with an easy push handle penetrating the staple or nail into the workpiece with ease. The pinch point free design helps to protect cables so they do not to get crushed on application.
This Stanley gun has an aluminium cast housing for greater durability and strength, is fitted with Hi/Lo adjustment to match density of materials and has easy access staple and brad insertion for faster loading.
This staple and nail gun has a lock down handle system fitted for easy storage. It will accept heavy-duty staples and brads for multiple applications from cable laying, upholstery work, fencing, architrave fitting and much more.

It will fire - STANLEY® Type-G staples in 6mm (1-TRA704T), 8mm (1-TRA705T), 10mm (1-TRA706T), 12mm (1-TRA708T) and 14mm (1-TRA709T) and STANLEY® Type-J Headed Brad Pins in 12mm (1-SWK-BN050T) and 15mm (1-SWK-BN625T).

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

The OX Pro Stainless Steel Plasterers Trowel - 5in x 14in / 127 x 356mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance.
FEATURES
Pre-worn edges to eliminate line & ripple marks
High quality tempered stainless steel blade
Lightweight aluminium shank - fully riveted
Handle set for perfect balance
Duragrip handle for ultimate comfort

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime.

Supplied with: 1 x Hex Key.

Specifications:

Input Power: 900W.
Strokes at No Load: 0-2,800/min.
Stroke Height: 20mm.
Max. Cutting Depth: Wood 115mm, Steel 8mm.

Voltage: 230V.
Input Power: 720W.
No Load Speed: 11,000/min.
Disc Size: 115mm.
Wire Cup Brushes: 60mm.
Spindle Thread: M14.

FEATURES

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate
Suitable for wet and dry cutting of porcelain, stone and other hard tiles
Mesh segment design ensures minimal chipping of material during cutting