Tools & Site Equipment

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 32mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 28mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 25mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 22mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 18mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.

Ideal for drilling, countersinking and counterboring in one operation.

This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.

Uses 7/64in Drill Bit.

To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.

For No 8 screw

The Faithfull 8 Piece Screwdriver Set is a versatile set featuring the seven most popular Slotted, Phillips and Pozidriv screwdrivers, with correctly hardened and tempered Chrome Vanadium steel blades and full size bi-material soft-grip handles for maximum user comfort and firm non-slip grip.

The set also contains a useful Magnetizer / De-magnetizer for use on screwdriver tips for screw retention and retrieval.

The set is supplied in a handy plastic storage case. Contains

3 x Slotted: 3.0mm x 75mm, 5.0mm x 125mm, 6.0mm x 150mm
3 x Pozidriv: PZ1 x 75mm, Stubby PZ2 x 38mm, PZ2 x 100mm
1 x Phillips: PH0 x 60mm
1 x Magnetizer/ De-Magnetizer

The Vileda 2-in-1 Dustpan and Brush Set is ideal for quick cleaning tasks. The dustpan features a flexible pan and rubber lip that helps to easily collect dirt on uneven floor surfaces. The brush has black bristles for sweeping hairs and dirt and has firmer, angled red bristles that are ideal for sweeping in corners and along edges.

The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits.

A carbon steel construction sleeve and body ensures durabilty and long life.

Irwin Lock-n-Load™ Quick Change Extension Bit Holder

Specification:
Insert bit: Standard 1/4 inch.
Length: 150mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit.

Bit Size: 8mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System.

Bit Size: 6mm.

These Vitrex 10 2080 Tile Marking Pencils are suitable for marking out tiles, glass, plastic and metal. They are not suitable for porous or porcelain tiles.

Pack of 2, one red and one black marker.

The Vitrex 10 2283 Flexi-Tip Sealant Smoother has a unique flexible tip for superb results on any surface. It is ideal for kitchens, bathrooms, showers, window frames etc.

It is perfect for smoothing most household sealants, fillers, grout etc. and is simple to use and easy to clean.

The Vitrex 10 2280 Grout Finisher is a double ended finisher, with a ball end, producing a neat grout line. It has a scraper end for removing excess grout. The VIT10 2280 is easy to clean.

The Vitrex 10 2116 Tile File has a tough, aluminium oxide coating. Smooth's sharp and uneven edges on cut tile.

Specifications:

Size: 6 x 2.1/2in.
Pack Quantity: 2.

The Vitrex 10 2420 Grout Rake has a tungsten carbide grit edged blade for longer life. It is fitted with a durable nylon handle designed for extra grip.
This Grout rake is used for removing old and discoloured grout.

The Vitrex 10 2075 Tile Scribe has a tungsten carbide tip and is suitable for scoring wall and floor tiles.

The Vitrex Tungsten Carbide Rod Saw Blades cut in any direction. Outlasts conventional hacksaw blades by up to 10 times.

Fits most standard hacksaw frames.

Length: 150mm (6in).

Suitable for use with Vitrex Tile Saws 102207, 102660.

The Vitrex 10 2430 Tile Nipper / Cutter has tungsten carbide tipped jaws for cutting and shaping wall tiles. It is ideal for awkward shaped cuts around pipes, switches, sills and fittings.
It has a soft feel handle for extra grip and comfort.

The Vitrex 10 1490 Heavy-Duty Tile Cutter is fitted with a tungsten carbide wheel (10mm) for scoring and snapping ceramic tiles up to 10mm thick. The body is manufactured from heavy-duty steel and is fitted with plastic hand grips for extra comfort during use.

Suitable for straight and freehand cutting.

Spare Parts Kit available. (VIT101493)

The Vitrex Combination Spreader has a convenient dual purpose design. With a notched edge for fast adhesive application and a squeegee edge for rapid grouting.

The Vitrex Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.

This Vitrex 10 2962 is a Large Tile Squeegee for faster grouting. It has a strong flexible plastic blade with a squeegee edge for rapid grouting and the handle is contoured for extra comfort.

The Grout Squeegee and Spreader Set is a pack of essential tools for tile adhesive and grout application, consisting of a large squeegee, a 6mm square notch tile adhesive spreader and a 4mm V notch spreader.

The Large squeegee has a strong flexible plastic blade with squeegee edge for rapid grout application and a contoured handle for extra comfort.

The Tile Adhesive spreaders allow for fast adhesive application:
6mm Square Notch - for installing tiles on walls
4mm V Notch – for installing smaller tiles and mosaics on walls

Vitrex Glass Diamond Blade for cutting glass tiles. Precise diamond arrangement and alignment on each blade, to control wear and increase cutting speed.

In some situations, this technology can increase the cutting speed by 50% while doubling a normal blades life.

Designed for use with the Vitrex 103402NDE.

Vitrex Standard Diamond Blade with a continuous rim for a cleaner cut. Suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone.

Wheel supplied with 22mm dia bore, and is supplied with a 16mm brass reduction ring.

For use with Vitrex 103402NDE.

Diameter: 110mm.

The Vitrex 102207 Tile Saw has an extra deep steel frame for improved cutting access. Its 150mm tungsten carbide blade, cuts in any direction. Soft-grip handle for extra comfort.

Cutting depth of 150mm - to the centre of a 300mm tile.

Spare Blade (VIT102203)

This Vitrex 10 2906 is a Professional 20mm Adhesive Round Notch Trowel, it has a rust resistant stainless-steel blade and a large, contoured handle with a soft grip to ensure comfort over prolonged use.
The solid aluminium shank has 9 rivets and is designed to be used by the professional installer.

Specifications:

Blade Size: 115 x 280mm.
Round Notches: 20mm.



Vitrex Professional Notched Adhesive Trowel.

Size: 115 x 280mm (11 x 4.1/2in)
Square Notches: 6mm

Scan directly ventilated goggles that will withstand medium energy high-speed impacts up to 120m/s (270mph). Large size direct ventilation through frame. Compact lightweight construction, can be worn over spectacles. Tough polycarbonate UV resistant lens.

Elasticated headstrap with soft vinyl flanges around the goggles ensure comfort and conformity to facial contour.

Conforms to EN 166:1B (3.4.9) standard.

These Scan FPP2 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. They are ideal for use with:
- Brick dust
- Concrete and plaster
- Hand sanding of wood and MDF
- Masonry and metal working with power tools (not welding)
- Loft insulation

With a FPP2 protection level, these masks are suitable for protecting against particles of between 2-5 microns, such as fine dusts, fumes, aqueous mists and oil based mists. For a guide on protection levels, please see below.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift.

The masks conform to EN149:2001 and A1:2009.

Disposable Mask Protection Levels:
FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists
FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists
FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists
EN149 Filtering Face Piece for Particulates.

These SCAPPEP2MV Moulded Valved Disposable Masks are supplied in a pack of 3.

The Monument 2059M Multi-Purpose Four-Way Key is used for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, as well as central heating pump cocks, some radiator and drain off valves.

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces.

The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified.

Not for use on stainless steel.

Made in Britain.

Monument MON1722 Autocut Pipe Cutter.

Size: 22mm.

High quality adjustable, copper pipe cutter tool that ensures a square even cut.
All parts liable to wear are heat treated.
For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.
It also has an integrated pipe-deburrer.

No.1. Capacity 4 to 28mm.

Spare wheel number MON273.

Made in Britain.

Capacity: 12 - 43mm

Universal Plunger

Builds up pressure of water which forces the obstruction clear.

Size 150mm (6 in).

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.

Size: 6 in.

Universal Double Worm Screw that pierces blockages such as paper or rags, and the obstruction is drawn back to clear the pipe.
Size: 2in.

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.

For professional people who require their tools to be at hand on a regular basis, this purpose designed set comes complete with a heavy-duty blue waterproof Bailey carry bag and supplied with adjustable shoulder straps. The compact nature of this set allows them to be easily stored in the works, shed, garage or van.

This Universal Drain Rod set includes 30 feet of the Bailey Blue Rods® with brass fittings.

The quality, reliability and strength of this equipment ensures that the toughest jobs can be tackled - an essential product for the builder, plumber, chimney sweep or handyman.

Contains:

10 x Blue Rods 3ft x 3/4in
1 x Plunger 4in
1 x Drop Scraper 4in
1 x Double Worm Screw

This Monument Heavy Duty Basin Wrench is used for fitting back nuts and union nuts, of pillar and bath taps behind basins, sinks and baths.
Manufactured from strong malleable material, the 327R wrench has correctly machined jaws to fit standard nuts, 15 and 22mm.
The offset design allows you to reach behind both sinks & baths easily.

Specification:

Capacity: 1/2 and 3/4in BSP.

Overall Length: 260mm.

The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar.

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting.

Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft.

Pack Quantity: 2

Monument galvanised steel wire with gripping handle for clearing sink, shower and bath wastes.

Size 6mm x 3.6m (1/4in x 12ft)

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion.

Pack Quantity: 2

Monument Soldering & Brazing Pad resist temperatures up to 600°C and do not present any of the hazards associated with asbestos material.

2350 Made from woven glass fabric (professional quality).
2351 Made from HDW graphite material (professional quality).

Made in Britain.

Monument 2350X Soldering & Brazing Pad resists temperatures up to 600º celsius, and does not present any of the hazards associated with asbestos material.

Made from woven glass fabric (Professional quality).
Size: 300mm² (12in²).

The Faithfull Flat Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. Manufactured from high-quality steel.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

The Monument Drain Auger comes with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals, and small drains etc.
The rotating crank handle, with thumbscrew, fits over and locks the cable and can be entered through strainers.
The 3344K drain auger can also be used without the handle as a refill for the MON3313.

Specifications:

Length: 7.5m (25ft) long retractable.
Diameter: 6mm (1/4 in).

Monument Internal Bending Springs with square section spring steel with a polished finish for internal bending of copper pipes.

The size of the spring corresponds to the inside diameter of tube into which it is to be inserted.

Size: 15mm

The Monument Wide Jaw Adjustable Wrench has a plastic rubber cushion handle, which is permanently adhered to the shank of the tool. Its soft, anti-slip material ensures a comfortable and strong grip.

The jaw configuration of the wrench results in a stronger and better 'tool to fastener' contact point, providing a substantially durable tool.

Made from Chrome Vanadium Steel with a Phosphate finish.

The Monument Wide Jaw Adjustable Wrench has the following specification:

Length: 150mm (6in).
Jaw Capacity: 34mm.

This Monument Steel Radiator Spanner is used on 3/8 in and 10 mm square section radiator vent plugs and bleed screws.
It has a Zinc plated finish with a slightly offset handle.

The Monument Radiator Spanner Air Release Key, 2054X, made from steel, a zinc plated valve spanner and an air release key, with a slightly offset handle.

Specification:

Size: 12mm (Double Ended).

Monument GRIP+ Mono Tap Backnut Spanner Set is a set of 3 double-ended tap back nut box spanners for quick assembly of tap backnuts on basins.

Supplied with T-bar.

The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain.

The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel.

Replacement Wheel Number MONW15PC.

Monument Automatic Copper Pipe Cutter.

Size: 22mm.

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain.

The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel.

Replacement Wheel Number MONW15PC.

Monument Automatic Copper Pipe Cutter.

Size: 15 mm.

Spare jaws to fit all Monument adjustable wrenches.

Monument 350L.

Size small: 28.5mm (1.1/8 in).

The Monument GRIP+ 323F Tap Backnut Box Spanner is double-ended for the quick assembly of tap backnuts on basins. Part of the GRIP+ range.

The Faithfull Black Pencil Marking Refills for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth.

Supplied in a sliding storage case to protect the refills from breakage.

The Faithfull Pencil Marking Refills are for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth.
Supplied in a sliding storage case to protect the refills from breakage.

Contains: 3 x Red Refills and 3 x Yellow Refills.

The Faithfull Pencil Marking Set is designed to aid in the marking of hard to reach places such as drilled holes, tight corners and piping. Each pencil can be used to easily mark any surface, whether it’s wet or dry. If needed, the markings can be wiped clean with a damp cloth.

This set contains the following:

1 x Long Reach Marker.
1 x Pen Holder.
12 x Colour Refills in a handy carry case (6 Black, 3 Red, 3 Yellow).

Marshalltown wooden handle with threaded end adaptor for use with M26 and M26A Swivel Pole Sanders.

Size: 1.2m (48in).

These Faithfull Standard Padsaw Blades are designed to fit most brands of padsaws, keyhole saws and pocket saws.
They are made from high quality tempered carbon silicon steel and are suitable for cutting wood, plastic and plasterboard.

Specifications:

Length: 250mm (10in).
Pack Quantity: 2.

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing.

With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.

Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 24 TPI

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing.

With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.

Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 18 TPI

The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing.

With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.

Carded pack of 2 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 32 TPI

The DEWALT Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage.

Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. They are suitable for use with portable and stationery circular saws.

The DEWALT DT10302QZ Circular Saw Blade has the following specifications:

Blade Diameter: 184mm.
Bore Size: 16mm.
Tooth Count: 24.
Nail Tough- Can be used on nail embedded wood

Bahco Coping Saw ideal for cutting curves, slots and intricate shapes in many materials, wood, fibre board, plywood, plastic, laminates, glass fibre.

The blades can be turned through 360º to cut any curve, and can be easily tensioned through the twist action wooden handle.

Length: 165mm (6.1/2in).
Teeth: 14 tpi.

Bahco spare blades for 301 coping saw. Made of hardened and tempered carbon steel. The fine teeth are ideal for wood cutting.

Teeth milled and set 14 tpi.
Length: 165mm
Pack of 5.

Spare blades for Bahco junior hacksaw frames.

Made of hardened and tempered carbon steel.

Teeth milled and set.

Length: 150mm (6 in).
Pack of 10.
32 TPI.

Bahco 239 Junior Saw is a wire framed junior hacksaw with an orange lacquered finish.

Fitted with a 32 TPI blade for metal cutting.

Blade length: 150mm (6in).

Bahco ERGO™ Handled Engineering Flat File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. Suitable for general work on iron and steel. The surfaces have a double cut and the edge is single cut.


Specification:

Length: 200mm
Cut: Bastard
Width: 20mm
Thickness: 5mm
Teeth per cm: 10

Bahco ERGO™ Handled Tapered Flat File for general work on iron and steel. Double cut on both sides and single cut on both edges. Tapered shape for easier access into angles and corners.

Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

This Bahco ERGO™ Handled Tapered Edge Flat File has the following specification:

Size: 200mm (8in)
Cut: Second
File Width: 20mm
File Thickness: 5mm
Teeth per cm: 15

The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF.

The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.

This Bahco 244P-20-U7-HP Barracuda Handsaw has the following specification:

Blade Length: 500mm (20in).
Tooth Pitch: 7 TPI.
Type: Universal hard point.

The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF.

The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.

This Bahco 244P-22-U7-HP Barracuda Handsaw has the following specification:

Blade Length: 550mm (22in).
Tooth Pitch: 7 TPI.
Type: Universal hard point.

Bahco ERGO™ Handled Half-Round File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

This Bahco ERGO™ Handled Half-Round File has the following specification:

Size: 200mm (8in)
Cut: Second
File Width: 20.5mm
File Thickness: 6mm
Teeth per cm: 15

The BlueSpot Straight Cutting Snips are drop forged for increased durability. They have accurately ground cutting blades with a nut and bolt joint design. They feature a handle lock for safe storage.

Size: 250mm (10in)

The Faithfull DWHAND is a lightweight Hand Sander which is extensively used in the dry walling industry for sanding the joints between plasterboards after they have been filled.
The sander has a comfortable soft-grip handle and features a foam backing pad, and easy clip paper release system ensuring the abrasive paper is securely held in position and also makes changing the paper sheet easy.
The large handle provides a secure grip to help maximise control and efficiency, while the large sanding surface make this product ideal for all flat sanding applications, around the workshop or home and is designed for use with 280mm x 85mm sanding sheets.

Specification:

Size: 223 x 85mm.

The Faithfull TDCAM51 cam buckle tie-downs are widely used in the transport and building industries and for many outdoor leisure activities. They may also be used to secure items in situ. These quick action tie-downs are designed for use when transporting lightweight items and are perfect for use with car roof racks.

Manufactured using a 100% soft polyester webbing and in accordance EN12195-2, these tie downs are extremely hard wearing, durable and robust. Cam buckle straps are efficient and quick to use, the webbing is simply pulled through self-locking cam buckle to the desired tension. Releasing the load is easily achieved by pressing down on the quick release lever at the rear of the buckle to release the tension.

Manufactured in accordance to EN12195-2.

Specification

Length: 5m.
Width: 25mm.
Breaking Strain: 200kg/daN.
Max. Working Load: 100kg/daN.

The Faithfull 5 Piece Forstner Bit Set, used for drilling in woodworking in preference to drill bits and flat bits whenever a very clean and precise hole is required. They also enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole is required. Supplied in an aluminium storage case.

Sizes: 15, 20, 25, 30 and 35mm.

Shank Size: 8mm.

These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S-style hooks ensure that loads are secured quickly and efficiently and provide ease of use.

Manufactured in accordance to EN12195-2.

Specification:

Length: 5m
Width: 25mm
Breaking Strain: 600kg/daN
Maximum Working Load: 300kg/daN

NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT

Pack quantity: 4.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 6.3 mm 1/4in.

Cutting Length: 16 mm.

Shank Diameter: 1/4in.

The Faithfull natural stiff Bassine broom heads provide an all-round good sweeping performance. They are designed for dry use.

These broom heads come complete with a handle and stay.

This Faithfull Stiff Bassine Broom has the following specification:

Head Width: 450mm (18in)
Handle Length: 137cm

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Manufactured using silicon carbide abrasive and ideal for sharpening scythes and other agricultural edge tools. Each stone is symmetrical. They are unaffected by climate conditions and designed to cut fast and clean. Use Dry.

Round Tapered
305mm (12 in)

The Faithfull Soft Broom is a low cost plastic broom with soft PVC bristles complete with a tubular steel, thread fitting handle. Supplied with a handy hanging bracket.
Width: 300mm (12in). Handle length: 1.2m.

These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J-style fixing hooks ensure that loads are secured quickly and efficiently and provide ease of use.

Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/daN.


Pack quantity: 1.

Manufactured in accordance to EN12195-2.
NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT.

The Faithfull FAITDTRUCK52 has the following specifications:
Length: 5m
Width: 50mm
Breaking strain: 4,000kg/daN
Maximum working load: 2000kg/daN

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 300mm.
Width: 4.8mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 250mm.
Width: 4.8mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 150mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 300mm.
Width: 4.8mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull FAICT250B Cable Ties have the following specifications:
Colour: Black.
Length: 250mm.
Width: 3.6mm.
Pack quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 200mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 150mm.
Width: 3.6mm.
Pack Quantity: 100.

A range of straight wooden broom handles supplied in a variety of lengths and diameters to fit most broom heads.

Length: 1525 cm (60in)
Diameter: 28 mm (1.1/8in)

Fits the following Faithfull brooms:
FAIBRBC13FL - BASSINE FLAT 325mm
FAIBRBC13SA - BASSINE SADDLEBACK 325mm
FAIBRPVC13FL - PVC FLAT 325mm
FAIBRPVC13SA - PVC SADDLEBACK 325mm
FAIBRSQUE18 - SQUEEGEE 450mm
FAIBRSQUE24 - SQUEEGEE 600mm

The Faithfull Soft Coco Broom is a by-product of coconut harvesting. Natural coco brushes are softer when compared to other natural brooms, but still provide good sweeping characteristics. This broom should only be used in dry conditions.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work