Tools & Site Equipment

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Faithfull Sledge Hammer for general use, ideal for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The Irwin Jack JAK880UN20 880 UN Universal Panel Saw comes with the following specification:

Length: 500mm (20in)
Teeth: 8 TPI

The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip.

Available with metric only or metric and imperial graduations.

This Stanley PowerLock® Classic Pocket Tape has metric and imperial graduations.

Blade Length: 3m/10ft
Blade Width: 19mm
Accuracy: EC Class II

Manufactured from hard silicon carbide abrasive, rubbing bricks are used for heavy-duty applications such as rubbing floors, cleaning and scouring castings, rubbing down concrete, and removing mould marks. Available in a plain or fluted version.

Most commonly used to clean or dress floor
tiles and concrete floors.
Type: Fluted
Size: 200 x 50 x 50mm (8 x 2 x 2in)

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact.

Designed to drive nail heads below the surface of the wood.

Point Diameter: 5mm (3/16in)
Length: 100mm (4in)

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact.

Designed to drive nail heads below the surface of the wood.

Point Diameter: 4.0mm (5/32in)
Length: 100mm (4in)

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.

Point Diameter: 3mm (1/8in).
Length: 100mm (4in).

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.

Point Diameter: 2.5mm (3/32in).
Length: 100mm (4in).

The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC.

These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping.

Pack of 10 Faithfull Multi-Purpose Cutting Discs 115 x 1.0 x 22.23mm

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 50 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 63 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges and bearing guided, making these trimmers ideal for professional and DIY use. Used when trimming timber, lippings and plastic laminates.

Type: Flush Trimmer 2 flute

Cutting Diameter: 6.3 mm 1/4in

Cutting Length: 25.4 mm

Shank Diameter: 1/4in

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting.

Specification:

Length: 300mm (12in)
Teeth: 6 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1531L Sabre Saw Blades are ideal for coarse fast cuts in wood (tree cutting and pruning).

Specification:

Length: 240mm
Teeth: 5 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S811H Sabre Saw Blades are ideal for coarse wood, free of nails (5-100mm) and pruning green wood (up to 100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S617K Sabre Saw Blades are ideal for coarse wood, free of nails (20-100mm) and pruning green wood (up to100mm). Especially for curved cuts/plunge cuts.

Specification:

Length: 150mm (6in)
Teeth: 3 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1118BF Saber Saw Blades are ideal for pallet repair, with nails/metal (5-150mm), sheet metal, pipes, aluminium profiles (3-12mm). They have a flexible flush cut.

Specification:

Length: 200mm (8in)
Teeth: 10 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S922BF Bi-Metal Sabre Saw Blades are ideal for thick sheet metal (3-8mm) and for solid pipes/profiles (10-100mm).

Specification:

Length: 150mm (6in)
TPI: 14 TPI

These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S918H Sabre Saw Blades are ideal for medium to thick sheet metal (3-8mm) fine, closed pipes and profiles (10-100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 15.9 mm 5/8in.

Cutting Length: 50 mm.

Shank Diameter: 1/2in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 15.0 mm 19/32in.

Cutting Length 25 mm

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 12.0 mm 15/32in.

Cutting Length: 19 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/4in Shank

Cutting Diameter: 11.0 mm 7/16in.

Cutting Length: 25 mm.

Shank Diameter: 1/4in.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Cutting Diameter: 4.0 mm 5/32in.

Cutting Length: 11 mm.

Shank Diameter: 1/4in.

The Faithfull Straight cutting jigsaw blade is ideal for very thin sheet metals, non-ferrous metals, and aluminium.
The cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.



Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 35.
Pack Qty: 5.

The Faithfull straight Metal Cutting Jigsaw Blade, for thin materials, is ideal for thin sheet metals, non-ferrous metals, and aluminium.
The 8009-HSS, coming in a pack of 5, the T118A is made of a good quality, for applications which include: Non-Ferrous Metals, Sheet Metal and Aluminium.

Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 21.
Pack Qty: 5.

The Faithfull Straight Metal Cutting Jigsaw Blade are built for thick materials, ideal for thick sheet metals, non-ferrous metals, and aluminium.
The T118B come in a pack of 5 and their cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.

Blade for cutting glass, Fibreglass and ceramic tiles

Type: Tungsten Carbide ('T' Shaft)

Cutting length: 50mm

Pack Qty: 5

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull T101DP Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics..

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull T144D Wood Jigsaw Blades provide fast straight cuts. Ideal for hardwood, softwood and laminated boards.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T111C) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T101D) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.

These Faithfull Laminated/Wood Jigsaw Blades, in a pack of five, are a clean, precise, straight down cutting blade.
The T101BR are ideal for hardwood, softwood, laminated boards, fibre boards, and plastics.

Specifications:

Type: Carbon Steel ('T' shaft).
Cutting length: 75mm.
TPI: 10.
Quantity: Pack of 5.

These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.

To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Set of 4 Containing: No.6 (7mm), No.8 (8mm), No.10 (10mm), and No.12 (11.5mm).

This Faithfull diamond boot blade will remove tough grout from between tiled surfaces. Its efficient shape allows aggressive grinding without damaging the tile. A long lasting blade which enables continuous work on large projects.

Compatible with many multi-function oscillating power tools.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T101B) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T119BO) Wood Jigsaw Blades are specially designed for curved cutting and ideal for epoxy, hardwood, softwood, laminated boards, insulated and heat insulation materials and plastics.

These Faithfull Drywall Screwdriver Adaptors are suitable for use in handheld drivers or power drills for driving screws into drywall.

The 1/4in shank adaptor features a pre-set recessed collar and fitted PH2 bits, ready for use in all drywall applications.

The Faithfull Carbon Steel Rosehead 60° included angle countersink. For countersinking screw holes in wood for the flush fitting of screw heads.


Can be used in both hand and power drills.

Type: Rosehead
Size: 13mm (1/2in)

Shank diameter: 6mm (1/4in)
Shank length: 40mm (1.5/8in)

The Faithfull High Speed Steel Rosehead Chubby 90° included angle Countersink is used for countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals.
They are also suitable for working on wood, plywood, MDF, and other man-made boards. They can be used in both hand tools, and power drills.

Specifications:

Type: Rosehead - Chubby.
Size: 13mm (1/2in).
Shank Diameter: 6mm (1/4in).

Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2mm increments.

Sizes 6 to 30 mm. Increments of 2.0 mm.

Max thickness 4 mm.

Made from HSS ( High-Speed Steel ).

Shank: 10 mm diameter.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB35HCS HCS Hinge Bore Bit has the following dimensions:
Size: 35mm diameter x 60mm long x 8mm shank.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions:
Size: 26mm diameter x 60mm long x 8mm shank.

The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications.

Compatible with many multi-function oscillating power tools.

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand.

The set of 4 contains sizes No 6, 8, 10 and 12.

Set of Four - Cuts size 6 (7mm), 8 (8mm), 10 (10mm) and 12 (11.5mm) Plugs

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 8 mm
Length 75 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 6 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 5 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 4 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 3 mm
Length 60 mm

Faithfull plastic dustpan complete with a soft bristle PVC banister brush, helps to make cleaning up a simpler task. Clip-in brush for compact storage.

Specification

Width: 220mm (8.3/4in)

This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in.

The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe.

Specifications:

Measuring range: 0-75mm (0-3in).
Resolution: 0.01mm (0.0005in).
Accuracy: ± 0.02mm (0.001in).
Auto off: 5 minutes.
Display: LCD, character height 8mm.

This Faithfull Single Wheel Glass Cutter has a tungsten carbide wheel and is ideal for the occasional user.
The metal die-cast handle features various sized notches for nibbling away waste glass after cutting.

This Faithfull Bassine/Cane Stiff Flat Broom Head is most suitable for use in dry conditions. Cane combined with Bass provides a natural brush, having the good sweeping characteristics of bassine with added stiffness, thanks to the cane. They are best used dry as can distort if used wet.

Broom head only.

Specifications:

Width: 325mm (13in).
Socket: 28mm.
Style: Flat.

The Faithfull unvarnished Hand Scrubbing Brush has stiff, short bristles, is ideal for general cleaning and for removing stubborn marks on most surfaces.

The Faithfull Churn Brush is versatile and hard wearing brush originally designed for the cleaning of milk churns but now used in preparing and cleaning brickwork and masonry.

260mm (10in).

Faithfull Stainless steel wire scratch brushes are used predominantly in stainless steel welding processes, where the use of an ordinary wire scratch brush would create the risk of contamination of the weld.

Tufts are of 316 grade stainless steel wire.

4 Row.

These Faithfull brass wire scratch brushes are used in situations where there could be a potential fire or explosion hazard.

Brass wire brushes will not cause a spark.

4 Row.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row with Scraper.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered .

3 Row.

The Faithfull PDRWCPL is designed for use within the toilet bowl, this plastic bellow plunger is shaped to force a powerful jet of water directly at a blockage within the main bend of the toilet pan.
Unlike a drain auger the plunger has no hard moving parts so there is no chance of scratching the pan. Simple and easy to use, this tool is the first to grab when tackling a blocked toilet, manufactured from durable plastic it is easily cleaned and is fitted with a removable handle for storage.

No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.

Overall length: 530mm (20.3/4in).

The Faithfull Crutch Pattern Stopcock Key also has additional 1/2 and 3/4 in square valve fittings. Turning handle has one pointed end for lifting covers.

Length 114cm (44.3/4in).

The combination of a ratchet cutting action and a lopper style blade makes the Faithfull Pipe Cutter tool highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed approximately three times to complete the cut.

Suitable for cutting neoprene hose, polythene pipe or fabric-reinforced solid rubber up to 42mm outside diameter at right angles to the tube.

This Faithfull Lead Dresser is used when moulding or dressing sheet lead, copper, zinc, aluminium and other ductile material.
Lead dressers have rounded corners with a raised handle to provide sufficient clearance for the user’s knuckles when hammering.
The lead dresser is durable, manufactured from tough high density plastic to withstand hammering on the top, or sides.

Designed to meet the needs of both the professional tradesman and the home handyman.
All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.
This cutter is to be used for bevelling and chamfering.

Cutting Angle Length C 13.0mm
Overall Diameter D 19.1mm
Cutting Angle 45 °
Shank Diameter 1/4in

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry.

Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.

The Monument GRIP+ Adjustable Basin Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.
The teeth on the jaws will grip uneven shapes etc.

The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach.

Correct heat treatment of all components ensures a long life.

Made in Britain.

Bahco 80 Series Adjustable Wrench with a phosphated finish and tapered jaws that feature a measurement scale on the fixed jaw. They have a 16° head angle with no protruding shank when fully open and a strong I-section handle with a spring-loaded square section, and a knurled adjusting nut.

Overall length: 100mm (4 1/4 in).
Jaw Capacity: 13mm

Monument pipe cutter wheels are made from high quality, heat treated steels.

Monument 273A Spare Wheel for Tube Cutters size 0 , 1 , 2A, TC3.

General purpose for copper, brass and aluminium tube.

Monument pipe cutter wheels are made from high quality, heat treated steels.

Suitable for both 268 and 289 pipe slices 15 mm and 22 mm copper tube and MON 240C and MON 303 21 mm and 28 mm.

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces.

The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified.

Not for use on stainless steel.

Made in Britain.

Monument Pipe Cutter is a high quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff.

It assures a square even cut and all parts liable to wear are heat-treated.

For sizes: 4mm up to 22mm (copper tube).

These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing.

They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection.

Will fit most makes of bowsaw frame.

These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing.

They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection.

Will fit most makes of bowsaw frame.

Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles.

A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before.

51 code represents DRY cutting blade.
23 code represents WET cutting blade.

The Bahco 10-24-51 Bowsaw is supplied with a peg tooth blade, for dry cutting.

Specification

Size: 600mm (24in).

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 6.0mm.
Working length: 57mm.
Overall length: 93mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 5.50mm.
Working length: 57mm.
Overall length: 93mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 5.0mm.
Working length: 52mm.
Overall length: 86mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 4.50mm.
Working length: 47mm.
Overall length: 80mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 4.0mm.
Working length: 43mm.
Overall length: 75mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 3.50mm.
Working length: 39mm.
Overall length: 70mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 3.00mm.
Working length: 33mm.
Overall length: 61mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 2.50mm.
Working length: 30mm.
Overall length: 57mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 2.0mm.
Working length: 24mm.
Overall length: 49mm.

The Wonder Mitre is a mitre guide that has been designed to handle the convex surface of coving. It has specially shaped notches that grip the coving, holding it fast. Providing the walls are square, very little finishing will be required.

Suitable for coving up to 127mm (5in).

Bahco ERGO™ Handled Engineering File for filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.

Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

This Bahco ERGO™ Handled Engineering Square File has the following specification:

Size: 250mm (10in)
Cut: Smooth Cut
File Width: 8mm
Teeth per cm: 15

Bahco ERGO™ Handled Round File for filing holes, large fillets and concave surfaces. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

Sizes 150mm (6in) are fully pointed, 200mm (8in) and longer are semi-pointed. Double cut.

This Bahco ERGO™ Handled Round File has the following specification:

Size: 200mm (8in)
Cut: Second
File Diameter: 8mm
Teeth per cm: 15

Faithfull Braided Nylon Chalk Line for use with powdered chalk for marking between two points to give a straight line.

Braided line resists fraying, and is also useful for a plumb line as it does not spin round as conventional twisted cord.

Braided nylon has less stretch than other lines and is also the strongest.

Length: 36m

These lines are normally used for giving a straight edge for laying bricks etc.

Length: 100m.

Bahco 2-in-1 ERGO™ Homeowner's Metal File with a two-component handle for maximum comfort and excellent grip. Developed according to the scientific ERGO™ process. With 2 different filing surfaces:

Double cut: rough sharpening of edges on spades, hoes, mower blades, axes, etc.
Single cut: fine sharpening of edges on above implements and on knives and scissors

Specification:

Shape: flat, parallel, with 2 flat, uncut edges
Length: 200mm (8in)

Bahco 2-in-1 ERGO™ Homeowner's Wood File with a two-component handle for maximum comfort and excellent grip. Developed according to the scientific ERGO™ process. With 2 different filing surfaces:

Rasp cut: rough filing of wood, plywood, soft plastics, etc.
Double cut: fine filing of metals, iron and plastics, etc.

Specification:

Shape: flat, parallel, with 2 flat, uncut edges
Length: 200mm (8in)

Bahco ERGO™ Handled Round File for filing holes, large fillets and concave surfaces. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

Sizes 150mm (6in) are fully pointed, 200mm (8in) and longer are semi-pointed. Double cut.

This Bahco ERGO™ Handled Round File has the following specification:

Size: 200mm (8in)
Cut: Bastard
File Diameter: 8mm
Teeth per cm: 10

Irwin Mini Saw uses standard hacksaw blades and its design allows it to be used in confined spaces.

Supplied with 1 x 250mm (10in) blade.