Tools & Site Equipment

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability.

The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer.

Made in Sheffield, Britain.

The Vitrex 10 2280 Grout Finisher is a double ended finisher, with a ball end, producing a neat grout line. It has a scraper end for removing excess grout. The VIT10 2280 is easy to clean.

The Vitrex 10 2420 Grout Rake has a tungsten carbide grit edged blade for longer life. It is fitted with a durable nylon handle designed for extra grip.
This Grout rake is used for removing old and discoloured grout.

The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.

The hacksaw frame has an alternative 90° blade mounting for flush cutting. It is supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex® bi-metal blade for excellent cutting performance.

Specification

Frame Length: 432mm
Blade Length: 300mm (12in)
Weight: 470g

The Faithfull unvarnished Hand Scrubbing Brush has stiff, short bristles, is ideal for general cleaning and for removing stubborn marks on most surfaces.

Marshalltown wooden handle with threaded end adaptor for use with M26 and M26A Swivel Pole Sanders.

Size: 1.2m (48in).

Faithfull Replacement Pick Handle to fit standard pick axe or mattock eye. Made from straight grained hardwood with a waxed finish.

Made to BS 3823 BW/BR British Standard specification which governs density, moisture content, grain, twist, knotting, finish, and staining, etc.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions:
Size: 26mm diameter x 60mm long x 8mm shank.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB35HCS HCS Hinge Bore Bit has the following dimensions:
Size: 35mm diameter x 60mm long x 8mm shank.

This Monument Heavy Duty Basin Wrench is used for fitting back nuts and union nuts, of pillar and bath taps behind basins, sinks and baths.
Manufactured from strong malleable material, the 327R wrench has correctly machined jaws to fit standard nuts, 15 and 22mm.
The offset design allows you to reach behind both sinks & baths easily.

Specification:

Capacity: 1/2 and 3/4in BSP.

Overall Length: 260mm.

Scan Heavy-Duty Rigger Gloves are superior quality heavy-duty cow split leather gloves with a double stitched green split leather reinforced palm, thumb and full wrapped index finger. Have a red fabric back with elasticated braid and 7cm rubberised cuffs, with reinforced fingertips and knuckle strap.

Conforms to EN388:2016 and EN ISO 21420 Standards.

Abrasion Performance Index (1-4): 3
Blade Cut Performance Index (1-5): 2
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 4

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered .

3 Row.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row with Scraper.

Faithfull Stainless steel wire scratch brushes are used predominantly in stainless steel welding processes, where the use of an ordinary wire scratch brush would create the risk of contamination of the weld.

Tufts are of 316 grade stainless steel wire.

4 Row.

The Vitrex 10 1490 Heavy-Duty Tile Cutter is fitted with a tungsten carbide wheel (10mm) for scoring and snapping ceramic tiles up to 10mm thick. The body is manufactured from heavy-duty steel and is fitted with plastic hand grips for extra comfort during use.

Suitable for straight and freehand cutting.

Spare Parts Kit available. (VIT101493)

The Faithfull replacement sledge hammer handle in straight grained hickory to BS3823, with a waxed finish.

Length: 600mm (24 in)

The Faithfull High Speed Steel Rosehead Chubby 90° included angle Countersink is used for countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals.
They are also suitable for working on wood, plywood, MDF, and other man-made boards. They can be used in both hand tools, and power drills.

Specifications:

Type: Rosehead - Chubby.
Size: 13mm (1/2in).
Shank Diameter: 6mm (1/4in).

No Load Speed: 0-3,100/min.
Max. Torque: 172Nm.
Capacity: Screw 4-10mm, Bolt M5-M16, HT Bolt M5-M12.

The HiKOKI G12STX Angle Grinder has a powerful motor with excellent overload durability and a top mounted on/off switch. With a no voltage restart protection feature to prevent the tool from restarting after the power has been temporarily cut off during operation. Ideal for a multitude of applications including removal of casting and finishing of various types of steel, bronze and aluminium materials.

Supplied with: 1 x Side Handle, 1 x Wrench and 1 x FREE Diamond Blade.

Specifications:

Input Power: 600W.
No Load Speed: 11,500/min.
Disc Size: 115mm.
Spindle: M14.
Overall Length: 254mm.

The MEGABAG can hold up to 1.5 tonnes of weight – that’s the weight of a Ford Focus! Fill it to the brim, book your collection and we’ll be around to pick it up!

how it works

1 - Buy it
Order online from HIPPO now and we aim to deliver to your home the next working day: you can also get your pre-paid collection code at the same time. Alternatively, you can buy HIPPOBAGs online from all the great DIY stores.

2 - Fill it
Take your time, our HIPPOBAGs are flat-packed for easy storage, ready to fill, whenever you want. Don’t forget that, unlike some other waste companies, we’re happy to take your heavy waste: soil, rubble and bricks are no problem!

3 - Book it
When you’re ready for us to take it away, book a collection either using your pre-paid collection code or if you don’t have one, you can buy your collection online. Or, just give our friendly team a call.

4 - We collect
Contact free collection and thanks to our brilliant team of HIPPO drivers we’ll be there as quickly as we can.

**PLEASE NOTE** - PC Building Supplies Ltd is only a stockist of the HIPPO bags, we cannot collect or arrange collection on your behalf. you will need to contact HIPPO Directly.

The MIDIBAG can hold up to 1 tonne of weight – that’s the weight of a fully grown polar bear! Even when full, you’d be hard pushed to reach the weight limit.

how it works

1 - Buy it
Order online from HIPPO now and we aim to deliver to your home the next working day: you can also get your pre-paid collection code at the same time. Alternatively, you can buy HIPPOBAGs online from all the great DIY stores.

2 - Fill it
Take your time, our HIPPOBAGs are flat-packed for easy storage, ready to fill, whenever you want. Don’t forget that, unlike some other waste companies, we’re happy to take your heavy waste: soil, rubble and bricks are no problem!

3 - Book it
When you’re ready for us to take it away, book a collection either using your pre-paid collection code or if you don’t have one, you can buy your collection online. Or, just give our friendly team a call.

4 - We collect
Contact free collection and thanks to our brilliant team of HIPPO drivers we’ll be there as quickly as we can.

**PLEASE NOTE** - PC Building Supplies Ltd is only a stockist of the HIPPO bags, we cannot collect or arrange collection on your behalf. you will need to contact HIPPO Directly.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan 45 Piece Household & Burns First Aid Kit in weatherproof 4 pocket travel bag with handle and belt clips. Ideal for use in the home and outdoors. Suitable for burns, grazes, cuts and much more. Contents:

2 x Burn Relief Dressings (1 of each size): 2.5 x 5, 10 x 10cm
2 x Burn Blot Sachet 3.5g
1 x Sterile Medium HSE Dressing 12 x 12cm (unboxed)
10 x Assorted Clear Washproof Plasters
1 x Microporous Tape 1.25cm x 1m
1 x Finger Dressing with Adhesive Fixing 3.5cm
1 x Single Use Triangular bandage 90 x 127cm
3 x Sterile Low Adherent Dressing Pads: 5 x 5cm(x2), 7.5 x 7.5cm(x1), 10 x 10cm(x1)
1 x Conforming Bandage 5cm x 4m
2 x Sterile Dressings (1 of each size): 5 x 7.5, 7.5 x 10cm
2 x Single Pods Eye Wash 20ml
6 x Assorted Safety Pins
4 x Singled Packed Sterile Moist Saline Cleansing Wipes
1 x Pair of Stainless Steel Nurses Scissors 5in
1 x Pair of Vinyl Powder-free Gloves (Medium)
1 x Rebreath Mouth to Mouth Resuscitation Device with Valve
1 x First Aid Guidance Leaflet

Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2mm increments.

Sizes 6 to 30 mm. Increments of 2.0 mm.

Max thickness 4 mm.

Made from HSS ( High-Speed Steel ).

Shank: 10 mm diameter.

1 x supplied in one of the colours shown.

The Hultafors Hi-Vis Retractable Knife has an ergonomic design. Its angled design has a pronounced finger grip and narrowing tip that affords excellent grip when measuring and cutting plasterboard in a single stroke.

The knife has a durable zinc housing with a screw wheel for easy opening without the use of tools. The handle contains a practical, spring-loaded blade magazine holding 10 spare blades (60mm). Few moving parts and magnetic fixings make changing and cleaning blades easy. The blade can be locked in 4 stages.

The Hultafors TC Curved Claw Hammer is forged in one piece for increased durability. Fitted with a vibration damping urethane plug. The thin, strong claw provides easy access without leaving marks. In addition, it is rounded to prevent it tearing your trousers. Ergonomically designed handle with clear end stop and a secure grip.

The Stanley Interlock Snap-Off Blade Knife has a die-cast metal body that is solvent resistant. The durable patented wedge lock action holds the blade securely in position. A simple finger screw action operates the locking mechanism. Suitable for heavy-duty cutting. The knife can be opened and cleaned, making it ideal for applications where material build-up is a problem.

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard.

Hardpoint tenon saw with soft-grip handle for user comfort.

The ideal choice for fine carpentry and can be used with a mitre box.

Size: 250mm (10 in)
Teeth 12 tpi.

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

Contains the following sizes: 6, 10, 12, 19, 25, 32, 38 and 50mm (1/4, 3/8, 1/2, 3/4, 1, 1.1/4, 1.1/2 and 2in).

Specifications:

Clamping Capacity: 300mm (12in).
Spreading Capacity: 515mm (20in).
Clamping Force: 136kg.
Pack Quantity: 2.

The Olympia Tools® Jigsaw has a powerful motor. Its adjustable steel base allows for bevel cuts up to 45°. Fitted with an ergonomic soft grip for increased user comfort. Dust extraction is possible via an adaptor (supplied), enabling you to keep the workplace clean and free of debris.

Supplied with: 1 x Vacuum Cleaner Adaptor and 1 x Hex Key.

Specifications:

Input Power: 450W.
Strokes at No Load: 3,000/min.
Stroke Length: 18mm.
Bevel Capacity: 45°.
Capacity: Steel 6mm, Wood 55mm.

Spare blades for Bahco junior hacksaw frames.

Made of hardened and tempered carbon steel.

Teeth milled and set.

Length: 150mm (6 in).
Pack of 10.
32 TPI.

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible.

These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade.

Specifications:

Blade length: 62mm.
Blade thickness: 0.65mm.
Blade height: 19mm.

Pack Qty. Dispenser of 10

Scan Knitshell Latex Palm Gloves are an essential garment for the protection of hands and offer maximum user comfort. Ideal for many work situations, they provide protection against minimal cuts and abrasions. The gloves have a durable non-slip latex coating which provides excellent protection and grip. Knitted wrists ensure comfort.

Conforms to EN 388:2016 and EN ISO 21420 standards.

Abrasion Performance Index (1-4): 2
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 1

These Faithfull Laminated/Wood Jigsaw Blades, in a pack of five, are a clean, precise, straight down cutting blade.
The T101BR are ideal for hardwood, softwood, laminated boards, fibre boards, and plastics.

Specifications:

Type: Carbon Steel ('T' shaft).
Cutting length: 75mm.
TPI: 10.
Quantity: Pack of 5.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Large Float Size: 350 x 150mm (14 x 6in)

The Vitrex Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.

This Vitrex 10 2962 is a Large Tile Squeegee for faster grouting. It has a strong flexible plastic blade with a squeegee edge for rapid grouting and the handle is contoured for extra comfort.

Scan Disposable Latex Gloves are lightly powdered inside to absorb moisture, keeping hands dry and sweat-free. The gloves are ambidextrous, meaning that any glove will fit either left or right hands. They are non-sterile.

Manufactured to BS EN 455 parts 1 and 2.

Size: Large
Box Quantity: 100

This Faithfull Lead Dresser is used when moulding or dressing sheet lead, copper, zinc, aluminium and other ductile material.
Lead dressers have rounded corners with a raised handle to provide sufficient clearance for the user’s knuckles when hammering.
The lead dresser is durable, manufactured from tough high density plastic to withstand hammering on the top, or sides.

The Faithfull, robust, L-shaped, plastic Line Blocks are a simple tool quickly adjusted under tension for length and height to ensure courses of bricks are running straight and true.
They feature built-in line storage and are supplied with 18 metres of orange polyethylene brick line.

Specifications:

Material: Plastic.
Length: 18m.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 10mm.
Working Length: 80mm.
Overall Length: 130mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 5mm.
Working Length: 50mm.
Overall Length: 85mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 6mm.
Working Length: 52mm.
Overall Length: 92mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 8mm.
Working Length: 75mm.
Overall Length: 120mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

5 Piece Lip & Spur Wood Drill Bit Set, these are the preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs.

Sizes: 4, 5, 6, 8 and 10mm.

4mm: Working Length: 43mm, Overall Length: 75mm.
5mm: Working Length: 50mm, Overall Length: 85mm.
6mm: Working Length: 52mm, Overall Length: 92mm.
8mm: Working Length: 75mm, Overall Length: 120mm.
10mm: Working Length: 80mm, Overall Length: 130mm.

The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits.

A carbon steel construction sleeve and body ensures durabilty and long life.

Irwin Lock-n-Load™ Quick Change Extension Bit Holder

Specification:
Insert bit: Standard 1/4 inch.
Length: 150mm.

This R.S.T. London Pattern Brick Trowel has a durable hardened steel blade. Its handle is soft-touch to enhance user comfort.

The traditional London pattern is the standard shape for laying bricks.

Size: 250mm (10 inch).

The Faithfull Pencil Marking Set is designed to aid in the marking of hard to reach places such as drilled holes, tight corners and piping. Each pencil can be used to easily mark any surface, whether it’s wet or dry. If needed, the markings can be wiped clean with a damp cloth.

This set contains the following:

1 x Long Reach Marker.
1 x Pen Holder.
12 x Colour Refills in a handy carry case (6 Black, 3 Red, 3 Yellow).

Ragni small trowel with a flexible 8 x 3in steel blade. It has a comfortable, soft grip handle and is ideal for use in narrow places which are inaccessible to a standard size trowel.

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion.

Pack Quantity: 2

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting.

Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft.

Pack Quantity: 2

This R.S.T. Margin Trowel has a carbon steel blade and metal tang. Primarily used to tidy cement and plaster edges.

For comfortable use, the trowel has a Soft Touch handle.

Size: 130 x 40mm (5.1/2 x 1.1/2in)

1 x XMS Twin Pack Paint Markers (Cdu Only)

This Marshalltown Mason's Line is made from twisted nylon that has been heat set after winding to increase stability. Not affected by mortar, oil or mildew and will not absorb water.

Suitable for staking out sites, concrete and landscaping layout and brick/block laying.

Made in the U.S.A

1 x Marshalltown M631 Mason's Line 76.2m (250ft) - Fluorescent Pink.

The IRWIN Vise-Grip Max Leverge End Cutting Pliers feature PowerSlot Technology, that provides 2X more power and half the cutting effort. They are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge.

They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored.

They are made in Germany and backed by IRWIN's Lifetime Guarantee.

Capacity: 3mm Hard Wire.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

Input Power: 1,100W.
No Load Speed: 3,450/min.
Blade: 216 x 30mm Bore.
Turntable Setting (Left/Right): 47°/47°.
Max. Cutting Width: 90°/45°: 120/80mm.
Max. Cutting Depth: 90°/45°: 60/45mm, 90°/90°: 120x60mm.
Double Mitre 45°/45°: 80x45mm.
Cable Length: 2m.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

The Faithfull Straight cutting jigsaw blade is ideal for very thin sheet metals, non-ferrous metals, and aluminium.
The cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.



Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 35.
Pack Qty: 5.

The Faithfull straight Metal Cutting Jigsaw Blade, for thin materials, is ideal for thin sheet metals, non-ferrous metals, and aluminium.
The 8009-HSS, coming in a pack of 5, the T118A is made of a good quality, for applications which include: Non-Ferrous Metals, Sheet Metal and Aluminium.

Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 21.
Pack Qty: 5.

The Faithfull Straight Metal Cutting Jigsaw Blade are built for thick materials, ideal for thick sheet metals, non-ferrous metals, and aluminium.
The T118B come in a pack of 5 and their cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.

FEATURES

Blade 4932373392 is ideally suited for cutting curves and irregular shapes. Use blade 4932373083 for straight cuts.

This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in.

The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe.

Specifications:

Measuring range: 0-75mm (0-3in).
Resolution: 0.01mm (0.0005in).
Accuracy: ± 0.02mm (0.001in).
Auto off: 5 minutes.
Display: LCD, character height 8mm.

The Einhell TC-AG 115 Mini Grinder is suitable for DIY enthusiasts who want a lightweight, handy tool provides good service on cutting, grinding and roughing jobs in the garden, workshop and garage. Fitted with a disk guard for high safety during operation and a spindle lock for fast and easy tool change.

Equipped with a robust, flat metal gear head, which ensures good power transmission and is very helpful in places which are difficult to access. An additional handle that can be adjusted in two positions enables user-friendly and safe handling even during long work sessions. A flange nut wrench is also provided.

Cutting Disk NOT Included.

Specifications:

Input Power: 500 Watt.
No Load Speed: 12,000/min.
Disc Diameter: 115mm.

The Olympia Tools® Mini Rotary Multi-Tool has a powerful 135W motor with a variable speed selection for more control. Fitted with an easy-to-use spindle lock, making it easy to switch between the different accessories. Its soft grip handle makes it easy to hold and provides precise handling.

Supplied in a handy carry case with the following accessories:

2 x Collets (2.3 & 3.2mm).
2 x HSS Drill Bits.
1 x Screw Type Mandrel.
1 x Tapered Screw Type Mandrel.
1 x Sanding Type Mandrel.
2 x Diamond Grinding Points.
10 x Grinding Stones.
3 x Sanding Discs Ø20mm/320 grit.
8 x Cut Off Wheels Ø22 x 1mm Thick.
4 x Sanding Drum Bands 16mm/120 grit.
4 x Polishing Wheels.
1 x Grinding Stone.
1 x Flexible Drive.

Specifications:

Input Power: 135W.
No Load Speed: 10,000-32,000/min.
Max. Collet Size: 3.2mm.

Irwin Mini Saw uses standard hacksaw blades and its design allows it to be used in confined spaces.

Supplied with 1 x 250mm (10in) blade.

The Faithfull Pencil Marking Refills are for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth.
Supplied in a sliding storage case to protect the refills from breakage.

Contains: 3 x Red Refills and 3 x Yellow Refills.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 600 x 100mm.
For 10-20Kg.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 400 mm x 80mm.
For 5-10Kg.

Monument GRIP+ Mono Tap Backnut Spanner Set is a set of 3 double-ended tap back nut box spanners for quick assembly of tap backnuts on basins.

Supplied with T-bar.

The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.

The Monument Cutter Twin Pack contains the following:

1715C: Size: 15mm.
1722Y: Size: 22mm.

These Scan FPP2 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. They are ideal for use with:
- Brick dust
- Concrete and plaster
- Hand sanding of wood and MDF
- Masonry and metal working with power tools (not welding)
- Loft insulation

With a FPP2 protection level, these masks are suitable for protecting against particles of between 2-5 microns, such as fine dusts, fumes, aqueous mists and oil based mists. For a guide on protection levels, please see below.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift.

The masks conform to EN149:2001 and A1:2009.

Disposable Mask Protection Levels:
FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists
FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists
FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists
EN149 Filtering Face Piece for Particulates.

These SCAPPEP2MV Moulded Valved Disposable Masks are supplied in a pack of 3.

The Scan Moulded Valved Safety Goggles are lightweight but strong and cover most eye protection requirements. These goggles will withstand medium energy, high-speed impacts of up to 120m/s (270mph). They have a blue tinted PVC frame with a clear impact resistant lens that will protect against liquid splash, debris and flying particles. The valve caps are removable to allow use as either indirect or direct vent goggles. The adjustable elastic headband is attached with a ball joint.

Conforms to EN 166:1B.

BLACK + DECKER Piranha Super Sanding Sheets are suitable for wood, paint and varnish, plastics, plaster and light metal sanding.

Fits the following BLACK + DECKER models:

MOUSE: KA150, KA150K, KA160, KA160K, KA161, KA161K, KA165GT, KA165GTK, and MT3000K.

QUATTRO: KC2000FK and KC2002FK.

SANDSTORM: KA250K and KA260GTK.

This pack of 5 BLACK + DECKER X31034 Mouse Sanding Sheets contains: 2 x 80 Grit, 2 x 180 Grit and 1 x 240 Grit.

The Monument 2059M Multi-Purpose Four-Way Key is used for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, as well as central heating pump cocks, some radiator and drain off valves.

This 7 piece Faithfull Multi-Function Tool Blade Set contains a selection of the most popular blades for cutting wood, man-made boards and metal and removing grout. Compatible with many multi-function oscillating power tools.

The set comprises of:

3 x Multi-Function Tool CrV Flush Cut Wood Blades Side Set, 2 x 34mm and 68mm.
This fast-cutting saw blade has a broad range of applications with ground, side set hardened teeth. Quick cutting performance in softwood, plastics, plasterboard, plastic pipes and similar materials.

2 x Multi-Function Tool Bi-Metal Flush Cut Wood/Metal Blade 22mm.
The HSS wavy set teeth on this bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for many flush cutting applications and plunge cutting in plasterboard.

1 x Multi-Function Tool Bi-Metal Radial Blade Wood/Metal 87mm.
The HSS wavy set teeth on this bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications.

1 x Multi-Function Tool Radial Carbide Grit Blade 65mm.
Ideal for a broad range of applications with carbide grit edge. Cuts tiles, plaster, porous concrete and similar construction materials. Suitable for cutting out damaged tile joint and for cutting grooves in plaster, porous concrete and similar construction materials.

This Faithfull diamond boot blade will remove tough grout from between tiled surfaces. Its efficient shape allows aggressive grinding without damaging the tile. A long lasting blade which enables continuous work on large projects.

Compatible with many multi-function oscillating power tools.

The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications.

Compatible with many multi-function oscillating power tools.

The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC.

These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping.

Pack of 10 Faithfull Multi-Purpose Cutting Discs 115 x 1.0 x 22.23mm

he Olympia Tools® Multi-Sander has a powerful 130W motor and uses a hook & loop sanding sheet fastening system. Its ergonomic, soft grip handle makes it easy to hold and provides precise handling. Fitted with a dust collection box to keep your working area clean and free from debris.

Supplied with: 3 x Sanding Sheets and 1 x Removable Dust Box.

Specifications:

Input Power: 130W.
Oscillating Speed: 14,000/min.
Orbit Diameter: 1.6mm.
Sand Paper Size: 140 x 140 x 80mm.

Scan Nitrile Coated Knitted Gloves are resilient to both grease and fuel, making them ideal for handling small oily parts. The tough palm and finger nitrile coating provides effective abrasion and puncture resistance. A 13g knitted seamless polyester liner improves comfort.

Conforms to EN420 and EN388 Standards.