Tools & Site Equipment

The Stanley 99E Original Retractable Blade Knife is made from grey painted die-cast metal body, which is ergonomically shaped for a good, comfortable grip. The blade extension can be controlled by the blade shifter, and 5 blade position allows a wider usage for a variety of cutting applications. The interlock nose firmly secures the blade into knife. For safety, the blade can be fully retracted into the body. Length: 155mm. Supplied with 3 blades, stored in the handle for safety and convenience.

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock. The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements. Accuracy: ± 0.5mm/m Length: 120cm

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock. The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements. Accuracy: ± 0.5mm/m Length: 180cm.

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock. The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements. Accuracy: ± 0.5mm/m Length: 60cm.

Convenient three piece set consisting of sharpening stone , bottle of lubricating oil and a honing guide. Guides the user to achieve a precise sharp edge that is square to the blade. Angle setting gauge with pre-set markings of 25°, 30° or 35°.

This Stanley Combination Square has a precision die cast body with 3 precision machined faces for accuracy. It can be used as a try and mitre square, depth and height gauge and spirit level and it has a 360-degree vial for all round visibility. The steel blade is etched with metric and imperial graduations, and coated for high visibility and is rust resistant. It has a high-quality brass nut and scriber fittings for long life. Specification: Size: 300mm.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements. Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products). The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use. 1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 12mm (1/2in)

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use. 1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 6mm (1/4in)

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use. 1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 8mm (5/16in)

The three cutting surfaces of the Combination Shave Hook are shaped to aid the removal of paint from both flat or contoured surfaces. Fitted with a DYNAGRIP™ handle.

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification. Used for driving finish nails beneath trim work. This set of 3 punches contains the following tip sizes: 1/32in (0.8mm) Yellow Sleeve 1/16in (1.6mm) Grey Sleeve 3/32in (2.4mm) Red Sleeve Overall Length: 125 mm / 5in

The Stanley FatMax® Folding Jab Saw with a three blade locking angle mechanism at 90°, 135° and 180°. Its triple bevelled toothing allows easier cutting that is up to 50% faster. The blade's sharp point is ideal for punching through plasterboard. For a comfortable and secure grip, the jabsaw has an anti-slip ergonomic bi-material handle.

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:. Tip Size: 3.5mm. Blade Length: 75mm (3in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:. Tip Size: 4.0mm. Blade Length: 100mm (4in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:. Tip Size: 5.5mm. Blade Length: 150mm (6in).

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:. Tip Size: PH0. Blade Length: 75mm (3in).

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:. Tip Size: PH2. Blade Length: 125mm (5in).

The Stanley FatMax® Pozidriv Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Stanley FatMax® VDE Insulated Screwdriver Pozidriv Tip has the following specification:. Tip Size: PZ0. Blade Length: 75mm (3in).

The Stanley FatMax® is a hardened and tempered blade for durability and long life. The moulded handle combines high impact plastic and soft touch inserts for improved comfort and control. The large smooth end pad to facilitate pushing and twisting the blade through plasterboard. Sharp point for piercing board, and aggressive triple bevel teeth for a faster cleaner cut. Specifications: Blade Length: 150mm (6in). Teeth: 7 TPI.

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Flared Tip Size 10.0mm Blade Length 200mm (8 in)

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Flared Tip Size 4.0mm Blade Length 100mm (4 in)

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Flared Tip Size 5.5mm Blade Length 100mm (4 in)

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface. Type - Parallel Tip Size 6.5mm Blade Length 30mm (1 3/16 in).

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface. Type - Parallel Tip Size 3.5mm Blade Length 75mm (3 in)

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface. Type - Parallel Tip Size 4.0mm Blade Length 100mm (4 in)

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface. Type - Parallel Tip Size 5.5mm Blade Length 30mm (1 3/16 in)

The Stanley FatMax® Phillips Tip Screwdrivers have a chrome vanadium steel bar that allows high torque and reduces the risk of tip breakage. The handle is moulded directly to the shaft for a virtually unbreakable bond, which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour-coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action, and the large diameter handle offers higher torque when driving wood screws. Type: Phillips Tip Size: PH1 Blade Length: 100mm (4in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Pozidriv Tip Size PZ.1 Blade Length 100mm (4 in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Pozidriv Tip Size PZ.2 Blade Length 125mm (5 in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Pozidriv Tip Size PZ.2 Blade Length 250mm (10 in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Type - Pozidriv Tip Size PZ.3 Blade Length 150mm (6 in)

These Stanley Snap-Off Blades have a straight cutting edge and fit Stanley snap-off knives. Available Sizes: 9mm, 18mm and 25mm. The 25mm blades are 1mm thick and have been specifically designed for intensive use. These Stanley Snap-Off Blades are 18mm and have 7 snap-off segments. They are suitable for use with the following 18mm snap-off knives: STA010481, STA010418, STA010018, STA010280, STA010151, STASTTKQ118. Pack of 5.

The Stanley FatMax® Snap-Off Knife is suitable for heavy-duty cutting. It features a blade wiper to remove excess debris and prolong the life of the blade. It also has a blade locking clamp and spare blades are automatically loaded. A removable blade snapper ensures faster and safer removal of a worn segment. The body has a soft grip, bi-material handle for comfort and control.

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

The Stanley FatMax® VDE Insulated Voltage Tester has an insulated plastic handle for complete safety. Its blade is made from chrome vanadium steel for long life. Tip: Parallel 3 x 65mm.

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection. The Stanley 2-69-264 is a 8-piece metric set comprising of the following: 1.5, 2, 2.5, 3, 4, 5, 6 and 8mm.

Stanley 8 Piece TORX Key Folding Set with a bi-material grip for increased comfort. Chamfered tip to aid location. Phosphate finish for corrosion protection. Sizes: TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40.

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection. The 2-69-265 is a 9 piece imperial set comprising of the following: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4in.

Aluminium folding square with 90° and 45° for versatility of job applications. Ideal for large scale setting out of building profiles, foundations , floor tiling, paving etc. Durable yet lightweight aluminium construction. Folds into a single length for easy storage. Size: 48 x 48 x 68in (122 x 122 x 172cm)

The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch. Input Power: 25W. Glue Sticks: 11.3mm Dual Melt.

The Stanley DYNAGRIP™ Heavy-Duty Hacksaw incorporates an improved grip for both accurate and comfortable sawing. The durable bi-metal frame is designed for extra cutting capacity and to withstand heavy-duty use. Patented quick blade change lever and tensioning device allows adjustment and memory of the tension, which facilitates faster cutting. Blades can be positioned at 90° or 45°. Max. Blade Tension: 80kg.

The Stanley 0TR250 Heavy-Duty Staple & Nail Gun is fitted with an easy push handle penetrating the staple or nail into the workpiece with ease. The pinch point free design helps to protect cables so they do not to get crushed on application. This Stanley gun has an aluminium cast housing for greater durability and strength, is fitted with Hi/Lo adjustment to match density of materials and has easy access staple and brad insertion for faster loading. This staple and nail gun has a lock down handle system fitted for easy storage. It will accept heavy-duty staples and brads for multiple applications from cable laying, upholstery work, fencing, architrave fitting and much more. It will fire - STANLEY® Type-G staples in 6mm (1-TRA704T), 8mm (1-TRA705T), 10mm (1-TRA706T), 12mm (1-TRA708T) and 14mm (1-TRA709T) and STANLEY® Type-J Headed Brad Pins in 12mm (1-SWK-BN050T) and 15mm (1-SWK-BN625T).

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA706T Heavy-Duty Staple 10mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA704T Heavy-Duty Staples 6mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities. 1 x Pack of 1000 Stanley TRA705T Heavy-Duty Staple 8mm

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience. Comes in folding open case. Set of 8 Keys. Teh 0-69-252 Imperial set has the followng sizes: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4in.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience. Comes in folding open case. Set of 8 Keys. The 0-69-251 Metric set has the following sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm.

The Stanley Interlock Snap-Off Blade Knife has a die-cast metal body that is solvent resistant. The durable patented wedge lock action holds the blade securely in position. A simple finger screw action operates the locking mechanism. Suitable for heavy-duty cutting. The knife can be opened and cleaned, making it ideal for applications where material build-up is a problem.

Junior Hacksaw with square steel frame, moulded grip handle and lower blade tensioner. A lever is incorporated in the handle enabling easy and rapid blade changing. Deep throat for good work capacity. Spare blade included. Blade length: 150mm (6in).

These Stanley Spare Blades are to fit the Stanley Junior Hacksaw.

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible. These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade.

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible. These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade. Specifications: Blade length: 62mm. Blade thickness: 0.65mm. Blade height: 19mm. Pack Qty. Dispenser of 10

Reversible sharpened double hook with point for penetrating and cutting sheet material, in particular floor covering and plastic sheeting as used in the packaging industry.

Type 53 light-duty staple. Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker. Size: 10mm Qty: 1000

Type 53 light-duty staple. Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker. Size: 6mm Qty: 1000

Type 53 light-duty staple. Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker. Size: 8mm Qty: 1000

This Stanley Line Level 042287 is used for setting out levels over large areas where precision is of secondary importance e.g., ideal for landscape gardening. It has a lightweight metal body for long life and includes hooks for using on string.

The Stanley Mole grips are a Straight Jaw Mole Grip which is suitable for gripping a wide variety of objects. The forged and machined jaws offer a maximum durability and the body is chrome plated to resist corrosion. The knurled screw at the base of the handle adjusts the clamping pressure and the non-pinching pull jaw release lever improves safety and ease of opening. These Stanley Tools Straight Jaw Locking Pliers have the following specification: Length: 229mm (9in).

The Stanley Surform® Flat Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The metal body gives strength and durability and a thumb screw provides a quick blade release. It is supplied fitted with a 140mm (5.1/2in) fine cut blade.

The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations. This Stanley PowerLock® Classic Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ft Blade Width: 19mm Accuracy: EC Class II

The Stanley Precision Moulding Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage. The contoured bar makes pulling, prying and lifting easier 1 x Stanley Precision Moulding Pry Bar 250mm (10in)

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth. It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide. Cutter seats at 21 degrees. Length: 6.1/4in. Cutter width: 1.5/8in.

The Stanley Open Reel Fibreglass Tape has a 13mm wide, durable fibreglass blade with easy to read markings in both metric and imperial graduations. The blade is non-corrosive, printed on both sides for easier reading and resists fading. Its high-visibility yellow ABS case makes it easy to find on the job site and there is a bi-material grip for comfort. The folding rewind crank with rotating fingertip knob makes blade rewind smoother and easier. This Stanley Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 30m/100ft Blade Width: 13mm Accuracy: EC Class III

The Stanley Tylon™ Pocket Tape has a corrosion resistant, long-life Tylon™ coated blade with positive blade lock for accurate measurements. Shows both metric and imperial graduations. Fitted with a Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction for improved strength and durability. The impact resistant ABS plastic case is fitted with an ergonomic overmould for all day comfort. This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Carded. Blade Length: 3m/10ft Blade Width: 12.7mm Accuracy: EC Class II

The Stanley sliding pocket knife has an all metal construction, making it solid, reliable and long lasting. It allows easy blade change, with no tools required, meaning that it is easier and faster than a standard utility knife. The knife's one-handed operation blade slider extends the blade easily and quickly. A push down and slide safety feature ensures that the blade is not accidentally extended. For convenience, the knife is pocket sized and has a metal belt clip for easy carriage. Accepts all standard Stanley blades (11-911, 11-921, 11-983).

STANLEY Torpedo Level with a shock resistant, bi-material body and rubber end caps that protect finished work surfaces from damage. Its rigid aluminium frame has a V-groove edge that is ideal for pipework. The magnetic base allows for hands-free operation on metal surfaces. Fitted with 3 vials: horizontal, plumb and 45°. Specification: Length: 230mm (9in)

These Stanley Snap-Off Blades have a straight cutting edge and fit Stanley snap-off knives. Available Sizes: 9mm, 18mm and 25mm. The 25mm blades are 1mm thick and have been specifically designed for intensive use. These Stanley Snap-Off Blades are 9mm and have 12 snap-off segments. They are suitable for use with the following 9mm snap-off knives: STA010475, STA010409, STA010095, STA010150, STASTTKQ109. Pack of 10.

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.

The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools.

The Stanley Surform® Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade. Overall Length: 400mm (16in).

The Stanley MR77 all-steel riveter has a head that rotates 360° for use at any angle. It has 4 nosepieces and a wrench store in its handle for versatility and convenient storage. It accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications.

This Stanley 028590 Window Scraper is ideal for removing excess paint, glue, stickers etc from windows. It has a strong yellow plastic handle for a long life. Supplied with 1 x heavy duty knife blade, and it uses a standard Stanley 011921 trimming knife blade. Specifications: Length: 170mm. Blade Width: 60mm.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide. The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided. Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor. Specifications: Input Power: 1,230 Watt. No Load Speed: 5,000/min. Blade: 160 x 16mm Bore, 24 Tooth TCT. Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools. For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices. Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger. Specifications: Strokes at No Load: 0-2,700/min. Stroke Length: 20mm. Bevel Capacity: 0-45°. Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application. Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas. The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family. Supplied with: 2 x 18V 2.0Ah Power X-Change Li-ion Batteries. 1 x Power X-Change Li-ion Charger. 1 x Carry Case. Specifications: Drill Chuck: Single Sleeve 13mm. No Load Speed: 0-400/0-1,500/min. Impact Rate: 0-6,400/0-24,000/bpm. Max. Torque: 48Nm. Torque Settings: 23. Charging Time: 80min.. Weight: 1.5kg.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete. The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations. Compatible with all other Power X-Change tools and batteries. Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case. Specifications: Modes: Screwdriving, Drilling, Hammer Drilling In Concrete. No Load Speed: 0-1,100/min. Impact Rate: 0-5,700/bpm with 1.2 joules. Capacity: Concrete 12mm. Charging Time: 30 Minutes.

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key. Specifications: Input Power: 200W. No Load Speed: 30,000-42,000/min. Oscillating Angle: 3°. Sandpaper Size: 93 x 93 x 93mm.

These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available. Size: 2 Weight 1070g (2.1/2lb). Diameter 38mm (1.1/2in).

The Vileda 2-in-1 Dustpan and Brush Set is ideal for quick cleaning tasks. The dustpan features a flexible pan and rubber lip that helps to easily collect dirt on uneven floor surfaces. The brush has black bristles for sweeping hairs and dirt and has firmer, angled red bristles that are ideal for sweeping in corners and along edges.

The Grout Squeegee and Spreader Set is a pack of essential tools for tile adhesive and grout application, consisting of a large squeegee, a 6mm square notch tile adhesive spreader and a 4mm V notch spreader. The Large squeegee has a strong flexible plastic blade with squeegee edge for rapid grout application and a contoured handle for extra comfort. The Tile Adhesive spreaders allow for fast adhesive application: 6mm Square Notch - for installing tiles on walls 4mm V Notch – for installing smaller tiles and mosaics on walls

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling. Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe. The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System. Bit Size: 6mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling. Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe. The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit. Bit Size: 8mm.

The Vitrex Combination Spreader has a convenient dual purpose design. With a notched edge for fast adhesive application and a squeegee edge for rapid grouting.