Fixing Ancillaries

Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole.

Screw Head Size:
Yellow: 3-4.5mm
Red: 3.5-5mm
Brown: 4-6mm
Blue: 4.5-6mm
Grey: 5-8mm

Typical Applications:

- Shelving and cabinets
- Suspended ceilings
- Switch boxes
- Trunking and cable trays
- Water heaters and radiators

These Rawlplug® UNO® Plugs have the following specification:

Colour: Blue
Size: 8 x 32mm
Pack Size: 80

Gripit Plasterboard Fixings are designed for use with all types of plasterboard installation. The unique Gripit wings fold out in small cavity spaces to create a vice-like grip.

Gripit Brown Fixings allow you to fix super heavy stuff, like radiators, sanitary ware and fittings to plasterboard walls. One Gripit Brown holds up to 93kg.

Easy to install, you will require a 20mm drill bit. They are also removable and reusable. Each Gripit Brown is supplied with an M6 x 30mm bolt.

This Pack of Gripit Brown Plasterboard Fixings contains:

4 x Gripit Brown Fixings
4 x Bolts M6 x 30mm

Gripit Plasterboard Fixings are designed for use with all types of plasterboard installation. The unique Gripit wings fold out in small cavity spaces to create a vice-like grip.

Gripit Red Fixings allow you to fix large shelves to plasterboard walls. One Gripit Red holds up to 74kg.

Easy to install, you will require an 18mm drill bit. They are also removable and reusable. Each Gripit Red is supplied with a 5.0 x 30mm screw.

This Pack of Gripit Red Plasterboard Fixings contains:

4 x Gripit Red Fixings
4 x Screws 5.0 x 30mm

Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole.

Screw Head Size:
Yellow: 3-4.5mm
Red: 3.5-5mm
Brown: 4-6mm
Blue: 4.5-6mm
Grey: 5-8mm

Typical Applications:

- Shelving and cabinets
- Suspended ceilings
- Switch boxes
- Trunking and cable trays
- Water heaters and radiators

These Rawlplug® UNO® Plugs have the following specification:

Colour: Red
Size: 6 x 28mm
Pack Size: 96

Visually pleasing
Suitable for all domestic pipework installations
UV Stabilized, therefore will not discolour
Can be linked together with the dovetails
Does not warp or distort with temperature changes
Suitable for both internal and external pipework installations
The clip has a Dovetail to enable multiple parallel pipe runs
Insulation can still be used around pipework by using our spacers

Visually pleasing
Suitable for all domestic pipework installations
UV Stabilized, therefore will not discolour
Can be linked together with the dovetails
Does not warp or distort with temperature changes
Suitable for both internal and external pipework installations
The clip has a Dovetail to enable multiple parallel pipe runs
Insulation can still be used around pipework by using our spacers

Our clips include a UV Stabilizer, therefore will not discolor
Does not warp or distort with temperature change
Suitable for both internal and external pipework installations
Large base design prevents clip being pulled into plaster
Reinforced sides adds to the strength and stability of the clip
Spacers and reducers available
Manufactured in the UK

Has excellent resistance to weathering making it suitable for both interior and exterior use
Backplates are also available to offer additional support or when fixing over existing pipework
Can simply clip over Talon Hinged Clips requiring no extra tools

High quality mechanically zinc plated hardened and tempered nail
Suitable for all common building materials drywall, wood, brick and concrete
For securing pipes to walls and surfaces
Manufactured in the UK

High quality mechanically zinc plated hardened and tempered nail
Suitable for all common building materials drywall, wood, brick and concrete
For securing pipes to walls and surfaces
Manufactured in the UK

Suitable for all domestic pipework installations
UV Stabilized, therefore will not discolour
Can be linked together with the dovetails
Does not warp or distort with temperature changes
Suitable for both internal and external pipework installations
Clip has a Dovetail to enable multiple parallel pipe runs
Insulation can still be used around pipework by using our spacers

Suitable for all domestic pipework installations
UV Stabilized, therefore will not discolour
Can be linked together with the dovetails
Does not warp or distort with temperature changes
Suitable for both internal and external pipework installations
Clip has a Dovetail to enable multiple parallel pipe runs
Insulation can still be used around pipework by using our spacers

Suitable for all domestic pipework installations
UV Stabilized, therefore will not discolour
Can be linked together with the dovetails
Does not warp or distort with temperature changes
Suitable for both internal and external pipework installations
Clip has a Dovetail to enable multiple parallel pipe runs
Insulation can still be used around pipework by using our spacers

Adds an extra 13mm clearance required for pipe installations
Saves time and cost
Stacking for extra standoff
Visually appealing
Adds uniformity to your pipework

Protruding side fins which restrict rotation
Manufactured from virgin grade polymer
Designed with 2 way expansion, providing rapid fixing with very high pull-out values
Moulded with prominent side fins, which restrict rotation and prevent fall out from overhead holes, while rim and centre bore provide easy starting for woodscrews

**Sold Individually**

A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a TIMco Setting Tool is recommended for a fast and efficient way of installation.

TECHNICAL DATA:
Anchor Dia. mm: 16
Anchor Length mm: 37
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ2
Fixture Hole Diameter mm: 5
Max Fixture Thickness mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 45
Screw Size mm: M5 x 45
Substrates: Drywall, Wood Panel
Thread Dia. mm: M5
Thread Type: Metric

**Sold Individually**

A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a TIMco Setting Tool is recommended for a fast and efficient way of installation.

TECHNICAL DATA:
Anchor Dia. mm: 16
Anchor Length mm: 52
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ2
Fixture Hole Diameter mm: 5
Max Fixture Thickness mm: 17
Point Type: B Point
Recess Type: Combi
Screw Length mm: 60
Screw Size mm: M5 x 60
Substrates: Drywall, Wood Panel
Thread Dia. mm: M5
Thread Type: Metric

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Comes complete with screws.
3 point tip for quick insertion.
Come with zinc plated pan headed cross recess 4.5 x 30mm screws.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Max Fixture Thickness mm: 6
Plug Dia. mm: 13
Plug Length mm: 31.5
Plug Size mm: 13 x 31.5
Recess Type: Cross
Screw Size mm: 4.5 x 30
Substrates: Plasterboard

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

Designed for use when fixing with chemical resins.
Chisel point, prevents the rod turning when tightening.
External hex drive.
Embedment depth mark.
Manufactured from grade 5.8 carbon steel.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 12
Fixture Hole Diameter mm: 12
Hole Depth mm: 90
Max Fixture Thickness mm: 20
Nut Size mm: M10
Nut Type: Hex Full
Point Type: Chisel
Size Thread Dia. x L mm: M10 x 130
Thread Dia. mm: M10
Thread Type: Metric
Washer Size mm: M10
Washer Type: Form A

Designed for use when fixing with chemical resins.
Chisel point, prevents the rod turning when tightening.
External hex drive.
Embedment depth mark.
Manufactured from grade 5.8 carbon steel.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Fixture Hole Diameter mm: 14
Hole Depth mm: 110
Max Fixture Thickness mm: 25
Nut Size mm: M12
Nut Type: Hex Full
Point Type: Chisel
Size Thread Dia. x L mm: M12 x 160
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12
Washer Type: Form A

**Sold Individually**

Nylon plug for use with coach screws into masonry. NOTE: Coach screws not included.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Drill Hole Dia. mm: 10
Substrates: Hardwood, Softwood, Brick
To Fit Screw Dia. mm: 6.0 - 8.0

**Sold Individually**

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Nylon speed plugs are ideal for electrical installation due to non-conductivity of nylon material.
NOTE: a 6mm pre-drilled hole may be required in harder plasterboards.
3 point tip for quick insertion.
Screws not included.
A pre-drilled 6.0mm hole may be required for denser plasterboards.

TECHNICAL DATA:
Rec Screw Dia. mm: 4.5 - 5.0
Recess Type: Cross
Substrates: Plasterboard

TIMCO resin offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
An economic resin ideal for day to day non-safety critical applications.
For areas that are well ventilated at the time of installation .

TECHNICAL DATA:
Included Items: T-Flow Nozzle (Qty 1)
Max Recommended Load kg: 50
Resin Type: Polyester
Substrates: Concrete, Brick, Block, Stone
UFI Number: TMJ3-KPC6-7M1R-3GYX

TIMCO resin offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
An economic resin ideal for day to day non-safety critical applications.
For areas that are well ventilated at the time of installation .

TECHNICAL DATA:
Included Items: T-Flow Nozzle (Qty 1)
Max Recommended Load kg: 50
Resin Type: Polyester
Substrates: Concrete, Brick, Block, Stone
UFI Number: 44H3-YPMF-1M1A-UQ2U

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

**Sold Individually**

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Bolt Length mm: 110
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 25)
Max Fixture Thickness mm: 50
Min Drill Hole Depth mm: 70
Point Type: B Point
Shield Length mm: 60
Socket Size mm: 17
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Loose
Washer Size mm: M10

**Sold Individually**

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.
<p>
TECHNICAL DATA:
Bolt Length mm: 75
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Edge Distance mm: 75
Fixture Hole Diameter mm: 10
Included Items: M8 Form A Washers (Qty 50)
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Point Type: B Point
Shield Length mm: 50
Socket Size mm: 13
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M8
Thread Type: Metric
Type: Loose
Washer Size mm: M8

**Sold Individually**

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 50)
M10 Hex Full Nuts (Qty 25)
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 70
Nut Size mm: M10
Nut Socket Size mm: 17
Point Type: B Point
Shield Length mm: 60
Stud Length mm: 100
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Projecting
Washer Size mm: M10

**Sold Individually**

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 50)
M10 Hex Full Nuts (Qty 25)
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 70
Nut Size mm: M10
Nut Socket Size mm: 17
Point Type: B Point
Shield Length mm: 60
Stud Length mm: 130
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Projecting
Washer Size mm: M10

**Sold Individually**

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 50
Screw Size mm: M5 x 50
Substrates: Plasterboard, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 50
Thread Type: Metric
Wall and Fixture Thickness mm: 20

**Sold Individually**

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Included Items: M12 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 120
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A