Fixings & Mastic

High quality mechanically zinc plated hardened and tempered nail Suitable for all common building materials drywall, wood, brick and concrete For securing pipes to walls and surfaces Manufactured in the UK

High quality mechanically zinc plated hardened and tempered nail Suitable for all common building materials drywall, wood, brick and concrete For securing pipes to walls and surfaces Manufactured in the UK

Suitable for all domestic pipework installations UV Stabilized, therefore will not discolour Can be linked together with the dovetails Does not warp or distort with temperature changes Suitable for both internal and external pipework installations Clip has a Dovetail to enable multiple parallel pipe runs Insulation can still be used around pipework by using our spacers

Suitable for all domestic pipework installations UV Stabilized, therefore will not discolour Can be linked together with the dovetails Does not warp or distort with temperature changes Suitable for both internal and external pipework installations Clip has a Dovetail to enable multiple parallel pipe runs Insulation can still be used around pipework by using our spacers

Suitable for all domestic pipework installations UV Stabilized, therefore will not discolour Can be linked together with the dovetails Does not warp or distort with temperature changes Suitable for both internal and external pipework installations Clip has a Dovetail to enable multiple parallel pipe runs Insulation can still be used around pipework by using our spacers

Adds an extra 13mm clearance required for pipe installations Saves time and cost Stacking for extra standoff Visually appealing Adds uniformity to your pipework

Protruding side fins which restrict rotation Manufactured from virgin grade polymer Designed with 2 way expansion, providing rapid fixing with very high pull-out values Moulded with prominent side fins, which restrict rotation and prevent fall out from overhead holes, while rim and centre bore provide easy starting for woodscrews

**Sold Individually** A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a TIMco Setting Tool is recommended for a fast and efficient way of installation. TECHNICAL DATA: Anchor Dia. mm: 16 Anchor Length mm: 37 Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ2 Fixture Hole Diameter mm: 5 Max Fixture Thickness mm: 30 Point Type: B Point Recess Type: Combi Screw Length mm: 45 Screw Size mm: M5 x 45 Substrates: Drywall, Wood Panel Thread Dia. mm: M5 Thread Type: Metric

**Sold Individually** A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a TIMco Setting Tool is recommended for a fast and efficient way of installation. TECHNICAL DATA: Anchor Dia. mm: 16 Anchor Length mm: 52 Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ2 Fixture Hole Diameter mm: 5 Max Fixture Thickness mm: 17 Point Type: B Point Recess Type: Combi Screw Length mm: 60 Screw Size mm: M5 x 60 Substrates: Drywall, Wood Panel Thread Dia. mm: M5 Thread Type: Metric

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Comes complete with screws. 3 point tip for quick insertion. Come with zinc plated pan headed cross recess 4.5 x 30mm screws.

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Comes complete with screws. 3 point tip for quick insertion. Come with zinc plated pan headed cross recess 4.5 x 30mm screws. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Max Fixture Thickness mm: 6 Plug Dia. mm: 13 Plug Length mm: 31.5 Plug Size mm: 13 x 31.5 Recess Type: Cross Screw Size mm: 4.5 x 30 Substrates: Plasterboard

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 50 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 100 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 60 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 110 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 80 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 130 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 100 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 150 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 5 Min Embedment Depth mm: 35 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 40 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 35 Min Embedment Depth mm: 35 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 70 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 40 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 90 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications. 8mm hex head countersunk with a fixed washer. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance . Single slash point to reduce torque and the risk of timber splitting at low edge distance TECHNICAL DATA: Thread Dia. mm: 6.7 Length mm: 100 Thread Length mm: 52 Size mm: 6.7 x 100 Fixed Washer Dia. mm: 12 Pack Quantity Unit: Pieces Head Dia. mm: 16.08 Socket Size mm: 8 Substrates: Hardwood, Softwood Lubrication: Wax Salt Spray Resistance BS EN 9227 Hrs: 1000 Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere Shank Type: Helix Thread Type: 50° Single Deep Point Type: Single Slash

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications. 8mm hex head countersunk with a fixed washer. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance . Single slash point to reduce torque and the risk of timber splitting at low edge distance TECHNICAL DATA: Thread Dia. mm: 6.7 Length mm: 150 Thread Length mm: 52 Size mm: 6.7 x 150 Fixed Washer Dia. mm: 12 Pack Quantity Unit: Pieces Head Dia. mm: 16.08 Socket Size mm: 8 Substrates: Hardwood, Softwood Lubrication: Wax Salt Spray Resistance BS EN 9227 Hrs: 1000 Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere Shank Type: Helix Thread Type: 50° Single Deep Point Type: Single Slash

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications. 8mm hex head countersunk with a fixed washer. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance . Single slash point to reduce torque and the risk of timber splitting at low edge distance TECHNICAL DATA: Thread Dia. mm: 6.7 Length mm: 200 Thread Length mm: 52 Size mm: 6.7 x 200 Fixed Washer Dia. mm: 12 Pack Quantity Unit: Pieces Head Dia. mm: 16.08 Socket Size mm: 8 Substrates: Hardwood, Softwood Lubrication: Wax Salt Spray Resistance BS EN 9227 Hrs: 1000 Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere Shank Type: Helix Thread Type: 50° Single Deep Point Type: Single Slash

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

General use with full round head for clamping. Bright nails are self coloured and have no plating. • Suitable for indoor applications • Conforms to Eurocode 5 and service class 1

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 2.36 Approx. Pcs Per 1kg: 750 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 40 Size mm: 40 x 2.36 Weight kg: 1 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 2.36 Approx. Pcs Per 1kg: 750 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 40 Size mm: 40 x 2.36 Weight kg: 2.5 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 440 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 50 Size mm: 50 x 2.65 Weight kg: 1 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 230 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 1 Type: Annular Ringshank

Annular rings provide additional holding power, where increased grip is required. Bright nails are self coloured and have no plating. Suitable for indoor applications. Conforms to Eurocode 5 and service class 1. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 230 Service Class 1 Corrosion Rating 1 - Clean, dry; low humidity environments Length mm: 65 Size mm: 65 x 3.35 Weight kg: 2.5 Type: Annular Ringshank

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Strengthened head to prevent shearing when installed with an impact tool. Ribs under the head for improved countersinking. Helix shank for removing debris and to improve clamping. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 4.5 Driver Bit Type: TX Drive Length mm: 65 Thread Length mm: 42 Size mm: 4.5 x 65 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 7.98 Gauge: 9 Salt Spray Resistance BS EN 9227 Hrs: 1000 Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere Included Items: TX20 S2 Bit (Qty 1) Shank Type: Helix Length inch: 2 Driver Bit Size: TX20 Thread Type: 40° Single Deep Point Type: Twin-Cut Size imp.: 9 x 2

A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Strengthened head to prevent shearing when installed with an impact tool. Ribs under the head for improved countersinking. Helix shank for removing debris and to improve clamping. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 4.5 Driver Bit Type: TX Drive Length mm: 75 Thread Length mm: 50 Size mm: 4.5 x 75 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 7.98 Gauge: 9 Salt Spray Resistance BS EN 9227 Hrs: 1000 Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere Included Items: TX20 S2 Bit (Qty 1) Shank Type: Helix Length inch: 2 Driver Bit Size: TX20 Thread Type: 40° Single Deep Point Type: Twin-Cut Size imp.: 9 x 2

Designed for use in man-made boards such as MDF and Chipboard. The C2 twin-cut tip gives rapid pickup and reduces the likelihood of splitting, whilst the steep head design finishing teeth and self-countersinking ribs ensure a flush finish. Specifically designed dual action head - finishing teeth and self-countersinking ribs ensures a flush finish. Plain shank for pulling the two substrates together without manual clamping. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 4.2 Length mm: 55 Thread Length mm: 30 Size mm: 4.2 x 55 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 8.2 Substrates: Hardwood, Softwood, Chipboard, MDF Gauge: 8 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Included Items: TX20 Impact Bit (Qty 1) Shank Type: Plain Length inch: 2 Driver Bit Size: TX20 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 100 Thread Length mm: 70 Size mm: 5.0 x 100 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.7 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 10 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 4 Driver Bit Size: PZ2 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 80 Thread Length mm: 70 Size mm: 5.0 x 80 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.7 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 10 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 3 Driver Bit Size: PZ2 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 90 Thread Length mm: 70 Size mm: 5.0 x 90 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.7 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 10 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 3 Driver Bit Size: PZ2 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 6 Length mm: 150 Thread Length mm: 70 Size mm: 6.0 x 150 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 11.65 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 12 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 6 Driver Bit Size: PZ3 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 6 Length mm: 50 Thread Length mm: 45 Size mm: 6.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 11.65 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 12 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 2 Driver Bit Size: PZ3 Thread Type: 40° Single Point Type: Twin-Cut

Specially designed for attaching tongue and groove floorboards and panelling. Provides a secure hidden fixture without causing damage, allowing a flush fit with the next board. Reduced head for concealed countersinking. Plain shank for pulling the two substrates together without manual clamping. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 30 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 4.66 Substrates: Hardwood, Softwood, Chipboard Gauge: 6 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Included Items: TX10 Impact Bit (Qty 1) Shank Type: Plain Length inch: 1 Driver Bit Size: TX10 Thread Type: 40° Single Point Type: Twin-Cut

Unique design for improved mixing suitable for both 300ml and 410ml resins. Spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be reused for subsequent applications. Low extrusion force. Unique design for improved mixing. TECHNICAL DATA: To Fit Cartridge Size ml: 300ml & 410ml

Designed for use when fixing with chemical resins. Chisel point, prevents the rod turning when tightening. External hex drive. Embedment depth mark. Manufactured from grade 5.8 carbon steel. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 12 Fixture Hole Diameter mm: 12 Hole Depth mm: 90 Max Fixture Thickness mm: 20 Nut Size mm: M10 Nut Type: Hex Full Point Type: Chisel Size Thread Dia. x L mm: M10 x 130 Thread Dia. mm: M10 Thread Type: Metric Washer Size mm: M10 Washer Type: Form A

Designed for use when fixing with chemical resins. Chisel point, prevents the rod turning when tightening. External hex drive. Embedment depth mark. Manufactured from grade 5.8 carbon steel. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 14 Fixture Hole Diameter mm: 14 Hole Depth mm: 110 Max Fixture Thickness mm: 25 Nut Size mm: M12 Nut Type: Hex Full Point Type: Chisel Size Thread Dia. x L mm: M12 x 160 Thread Dia. mm: M12 Thread Type: Metric Washer Size mm: M12 Washer Type: Form A

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. NOTE: Sharp point only. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 20 Thread Length mm: 15 Size mm: 3.5 x 20 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 6.68 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 6 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp Size imp.: 6 x 3/4

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 40 Thread Length mm: 35 Size mm: 3.5 x 40 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 6.68 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 6 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 6 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 25 Thread Length mm: 20 Size mm: 4.0 x 25 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 30 Thread Length mm: 25 Size mm: 4.0 x 30 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 40 Thread Length mm: 35 Size mm: 4.0 x 40 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 1 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 1

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 50 Thread Length mm: 45 Size mm: 4.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 2 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 2

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 50 Thread Length mm: 45 Size mm: 5.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.74 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 10 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 2 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 10 x 2

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 80 Thread Length mm: 70 Size mm: 5.0 x 80 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.74 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 10 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 3 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 10 x 3

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 1100 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 38 Size mm: 38 x 3.35 Weight kg: 1 Type: Clout

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 620 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 65 Size mm: 65 x 3.35 Weight kg: 1 Type: Clout

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 380 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 30 Size mm: 30 x 3.35 Weight kg: 0.5 Type: Clout

Large diameter head, perfect for attaching roofing felt, slate and shingles. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 3.35 Approx. Pcs Per 1kg: 380 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Roofing Felt, Slate, Shingles Length mm: 30 Size mm: 30 x 3.35 Weight kg: 2.5 Type: Clout

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 38 Thread Length mm: 33 Size mm: 3.5 x 38 Pack Quantity Unit: Pieces Recess Type: Phillips Substrates: Softwood, Drywall Salt Spray Resistance BS EN 9227 Hrs: 48 Corrosion Rating: 1 - Clean, dry; low humidity environments Screws Per Strip: 50 Length inch: 1 Driver Bit Size: PH2 Thread Type: Coarse Point Type: 25° Sharp

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 40 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: Phillips Substrates: Softwood, Drywall Salt Spray Resistance BS EN 9227 Hrs: 48 Corrosion Rating: 1 - Clean, dry; low humidity environments Screws Per Strip: 50 Length inch: 1 Driver Bit Size: PH2 Thread Type: Coarse Point Type: 25° Sharp

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 55 Thread Length mm: 50 Size mm: 3.5 x 55 Pack Quantity Unit: Pieces Recess Type: Phillips Substrates: Softwood, Drywall Salt Spray Resistance BS EN 9227 Hrs: 48 Corrosion Rating: 1 - Clean, dry; low humidity environments Screws Per Strip: 50 Length inch: 2 Driver Bit Size: PH2 Thread Type: Coarse Point Type: 25° Sharp

For fixing fibre cement slates. Provides high levels of rust protection. TECHNICAL DATA: Shank Dia. mm: 1.5 Head Dia. mm: 20 Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere Substrates: Fibre Cement Slates Length mm: 20 Size mm: 20 x 1.50 Type: Disc Rivet

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 25 Thread Length mm: 20 Size mm: 3.5 x 25 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 32 Thread Length mm: 27 Size mm: 3.5 x 32 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 32 Thread Length mm: 27 Size mm: 3.5 x 32 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 38 Thread Length mm: 33 Size mm: 3.5 x 38 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 38 Thread Length mm: 33 Size mm: 3.5 x 38 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 42 Thread Length mm: 37 Size mm: 3.5 x 42 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 40 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 40 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 50 Thread Length mm: 45 Size mm: 3.5 x 50 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 2 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 50 Thread Length mm: 45 Size mm: 3.5 x 50 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 2 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 60 Thread Length mm: 50 Size mm: 3.5 x 60 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 2 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 4.8 Length mm: 100 Thread Length mm: 63 Size mm: 4.8 x 100 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 4 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 780 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 13 Size mm: 13 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 580 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 20 Size mm: 20 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 580 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 20 Size mm: 20 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 420 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 30 Size mm: 30 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 420 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 30 Size mm: 30 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 40 Size mm: 40 x 3.00 Weight kg: 1 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 40 Size mm: 40 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 3 Approx. Pcs Per 1kg: 320 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Substrates: Plasterboard, Roofing Felt Length mm: 50 Size mm: 50 x 3.00 Weight kg: 2.5 Type: Extra Large Head Clout

34° collation angle
Diamond point for maximum penetration
Clipped head to increase the number of nails per strip and therefore reduce tool loading times
Suitable for indoor and covered outdoor applications
Conforms to Eurocode 5 and Service Class 2
Part ring shank type
Substrates: Timber Structure
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Nails Per Strip: 44
Collation Angle: 34°
Point Type: Diamond
Service Class: 2
Shank Type: Part Ring
CE Standard Web: BS EN 14592:2008
Shank Dia. mm: 3.1
Eurocode: 5
Thread Length mm: 40.8
Type: Trade Pack
First Fix

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M10 x 1000 Thread Dia. mm: M10 Thread Type: Metric

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M12 x 1000 Thread Dia. mm: M12 Thread Type: Metric

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M6 x 1000 Thread Dia. mm: M6 Thread Type: Metric

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M8 x 1000 Thread Dia. mm: M8 Thread Type: Metric

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 30 Size mm: 30 x 2.50 Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 25 Size mm: 25 x 2.50 Weight kg: 0.1 Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 30 Size mm: 30 x 2.50 Weight kg: 0.1 Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit. 35° sharp point for easy penetration. Hardened carbon steel for extra strength. Bright zinc plated for internal use. TECHNICAL DATA: Shank Dia. mm: 2.5 Corrosion Rating 1 - Clean, dry; low humidity environments Substrates: Masonry Length mm: 40 Size mm: 40 x 2.50 Weight kg: 0.1 Type: Masonry

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ3 Max Fixture Thickness mm: 50 Min Drill Hole Depth mm: 60 Plug Dia. mm: 10 Plug Length mm: 100 Plug Size mm: 10.0 x 100 Recess Type: Pozi Screw Size mm: 5.5 x 105 Size Dia. x L mm: 10.0 x 100 Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 8 Driver Bit Size: PZ3 Max Fixture Thickness mm: 40 Min Drill Hole Depth mm: 50 Plug Dia. mm: 8 Plug Length mm: 80 Plug Size mm: 8.0 x 80 Recess Type: Pozi Screw Size mm: 4.8 x 85 Size Dia. x L mm: 8.0 x 80 Substrates: Concrete, Brick, Block

**Sold Individually** A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ3 Max Fixture Thickness mm: 110 Min Drill Hole Depth mm: 60 Plug Dia. mm: 10 Plug Length mm: 160 Plug Size mm: 10.0 x 160 Recess Type: Pozi Screw Size mm: 5.5 x 165 Size Dia. x L mm: 10.0 x 160 Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ3 Max Fixture Thickness mm: 70 Min Drill Hole Depth mm: 60 Plug Dia. mm: 10 Plug Length mm: 120 Plug Size mm: 10.0 x 120 Recess Type: Pozi Screw Size mm: 5.5 x 125 Size Dia. x L mm: 10.0 x 120 Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ3 Max Fixture Thickness mm: 90 Min Drill Hole Depth mm: 60 Plug Dia. mm: 10 Plug Length mm: 140 Plug Size mm: 10.0 x 140 Recess Type: Pozi Screw Size mm: 5.5 x 145 Size Dia. x L mm: 10.0 x 140 Substrates: Concrete, Brick, Block

**Sold Individually** A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 10 Driver Bit Size: PZ3 Max Fixture Thickness mm: 30 Min Drill Hole Depth mm: 60 Plug Dia. mm: 10 Plug Length mm: 80 Plug Size mm: 10.0 x 80 Recess Type: Pozi Screw Size mm: 5.5 x 85 Size Dia. x L mm: 10.0 x 80 Substrates: Concrete, Brick, Block

**Sold Individually** A light duty hammer-set through fixing for masonry. Quick and easy fixing. Strong collar to support drive nail. Tough durable nylon plug. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: PZ2 Max Fixture Thickness mm: 35 Min Drill Hole Depth mm: 35 Plug Dia. mm: 6 Plug Length mm: 60 Plug Size mm: 6.0 x 60 Recess Type: Pozi Screw Size mm: 3.5 x 65 Size Dia. x L mm: 6.0 x 60 Substrates: Concrete, Brick, Block

**Sold Individually** A light duty hammer-set through fixing for masonry. Quick and easy fixing. Strong collar to support drive nail. Tough durable nylon plug. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 8 Driver Bit Size: PZ3 Max Fixture Thickness mm: 60 Min Drill Hole Depth mm: 50 Plug Dia. mm: 8 Plug Length mm: 100 Plug Size mm: 8.0 x 100 Recess Type: Pozi Screw Size mm: 5.0 x 105 Size Dia. x L mm: 8.0 x 100 Substrates: Concrete, Brick, Block

**Sold Individually** Nylon plug for use with coach screws into masonry. NOTE: Coach screws not included. Anti-rotation lugs help prevent turning during installation. TECHNICAL DATA: Drill Hole Dia. mm: 10 Substrates: Hardwood, Softwood, Brick To Fit Screw Dia. mm: 6.0 - 8.0