Fixings & Mastic

Large diameter head, perfect for attaching roofing felt, slate and shingles.
Provides high levels of rust protection.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 380
Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere
Substrates: Roofing Felt, Slate, Shingles
Length mm: 30
Size mm: 30 x 3.35
Weight kg: 0.5
Type: Clout

Large diameter head, perfect for attaching roofing felt, slate and shingles.
Provides high levels of rust protection.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 380
Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere
Substrates: Roofing Felt, Slate, Shingles
Length mm: 30
Size mm: 30 x 3.35
Weight kg: 2.5
Type: Clout

Used to secure plasterboard to timber stud work.
The collated strips are specifically designed to be compatible with all leading power tool brands.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 38
Thread Length mm: 33
Size mm: 3.5 x 38
Pack Quantity Unit: Pieces
Recess Type: Phillips
Substrates: Softwood, Drywall
Salt Spray Resistance BS EN 9227 Hrs: 48
Corrosion Rating: 1 - Clean, dry; low humidity environments
Screws Per Strip: 50
Length inch: 1
Driver Bit Size: PH2
Thread Type: Coarse
Point Type: 25° Sharp

Used to secure plasterboard to timber stud work.
The collated strips are specifically designed to be compatible with all leading power tool brands.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 40
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: Phillips
Substrates: Softwood, Drywall
Salt Spray Resistance BS EN 9227 Hrs: 48
Corrosion Rating: 1 - Clean, dry; low humidity environments
Screws Per Strip: 50
Length inch: 1
Driver Bit Size: PH2
Thread Type: Coarse
Point Type: 25° Sharp

Used to secure plasterboard to timber stud work.
The collated strips are specifically designed to be compatible with all leading power tool brands.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 55
Thread Length mm: 50
Size mm: 3.5 x 55
Pack Quantity Unit: Pieces
Recess Type: Phillips
Substrates: Softwood, Drywall
Salt Spray Resistance BS EN 9227 Hrs: 48
Corrosion Rating: 1 - Clean, dry; low humidity environments
Screws Per Strip: 50
Length inch: 2
Driver Bit Size: PH2
Thread Type: Coarse
Point Type: 25° Sharp

For fixing fibre cement slates. Provides high levels of rust protection.
TECHNICAL DATA:

Shank Dia. mm: 1.5
Head Dia. mm: 20
Corrosion Rating 3 - Urban; industrial areas with a low salt atmosphere
Substrates: Fibre Cement Slates
Length mm: 20
Size mm: 20 x 1.50
Type: Disc Rivet

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 60
Thread Length mm: 50
Size mm: 3.5 x 60
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 25
Thread Length mm: 20
Size mm: 3.5 x 25
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 32
Thread Length mm: 27
Size mm: 3.5 x 32
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 32
Thread Length mm: 27
Size mm: 3.5 x 32
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 38
Thread Length mm: 33
Size mm: 3.5 x 38
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 38
Thread Length mm: 33
Size mm: 3.5 x 38
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 42
Thread Length mm: 37
Size mm: 3.5 x 42
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 42
Thread Length mm: 37
Size mm: 3.5 x 42
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 40
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 45
Thread Length mm: 40
Size mm: 3.5 x 45
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 50
Thread Length mm: 45
Size mm: 3.5 x 50
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 50
Thread Length mm: 45
Size mm: 3.5 x 50
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 60
Thread Length mm: 50
Size mm: 3.5 x 60
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 4.2
Length mm: 75
Thread Length mm: 50
Size mm: 4.2 x 75
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 2
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive.
Bugle head to reduce likelihood of damaging the board surface.
25° super sharp point for ease of penetration.
60° twin-thread offers excellent pull-out values and insertion speed.
TECHNICAL DATA:
Thread Dia. mm: 4.8
Length mm: 100
Thread Length mm: 63
Size mm: 4.8 x 100
Pack Quantity Unit: Pieces
Recess Type: Phillips
Max Drilling Thickness mm: 0.6
Substrates: Thin Sheet Metal, Drywall
Corrosion Rating: 1 - Clean, dry; low humidity environments
Included Items: PH2 S2 Bit (Qty 1)
Length inch: 4
Driver Bit Size: PH2
Thread Type: Fine
Point Type: 25° Sharp

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 780
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 13
Size mm: 13 x 3.00
Weight kg: 1
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 580
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 20
Size mm: 20 x 3.00
Weight kg: 1
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 580
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 20
Size mm: 20 x 3.00
Weight kg: 2.5
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.
TECHNICAL DATA:

Shank Dia. mm: 3
Approx. Pcs Per 1kg: 420
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 30
Size mm: 30 x 3.00
Weight kg: 1
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 420
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 30
Size mm: 30 x 3.00
Weight kg: 2.5
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 350
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 40
Size mm: 40 x 3.00
Weight kg: 1
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 350
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 40
Size mm: 40 x 3.00
Weight kg: 2.5
Type: Extra Large Head Clout

Extra large diameter head for extra clamping, perfect for fitting roofing felt and plasterboard.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3
Approx. Pcs Per 1kg: 320
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Plasterboard, Roofing Felt
Length mm: 50
Size mm: 50 x 3.00
Weight kg: 2.5
Type: Extra Large Head Clout

34° collation angle<br>
Diamond point for maximum penetration<br>
Clipped head to increase the number of nails per strip and therefore reduce tool loading times<br>
Suitable for indoor and covered outdoor applications<br>
Conforms to Eurocode 5 and Service Class 2<br>
Part ring shank type<BR>
Substrates: Timber Structure<BR>
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas<BR>
Nails Per Strip: 44<BR>
Collation Angle: 34°<BR>
Point Type: Diamond<BR>
Service Class: 2<BR>
Shank Type: Part Ring<BR>
CE Standard Web: BS EN 14592:2008<BR>
Shank Dia. mm: 3.1<BR>
Eurocode: 5<BR>
Thread Length mm: 40.8<BR>
Type: Trade Pack<BR>
First Fix

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M10 x 1000
Thread Dia. mm: M10
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M12 x 1000
Thread Dia. mm: M12
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M6 x 1000
Thread Dia. mm: M6
Thread Type: Metric

**Sold Individually**

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 975
Size Thread Dia. x L mm: M8 x 1000
Thread Dia. mm: M8
Thread Type: Metric

Hardened nail specifically designed for fixing to masonry and concrete blocks. Countersunk head for flush fit.
35° sharp point for easy penetration.
Hardened carbon steel for extra strength.
Bright zinc plated for internal use.

TECHNICAL DATA:
Shank Dia. mm: 2.5
Corrosion Rating 1 - Clean, dry; low humidity environments
Substrates: Masonry
Length mm: 30
Size mm: 30 x 2.50
Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks.
Countersunk head for flush fit.
35° sharp point for easy penetration.
Hardened carbon steel for extra strength.
Bright zinc plated for internal use.

TECHNICAL DATA:
Shank Dia. mm: 2.5
Corrosion Rating 1 - Clean, dry; low humidity environments
Substrates: Masonry
Length mm: 25
Size mm: 25 x 2.50
Weight kg: 0.1
Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks.
Countersunk head for flush fit.
35° sharp point for easy penetration.
Hardened carbon steel for extra strength.
Bright zinc plated for internal use.

TECHNICAL DATA:
Shank Dia. mm: 2.5
Corrosion Rating 1 - Clean, dry; low humidity environments
Substrates: Masonry
Length mm: 30
Size mm: 30 x 2.50
Weight kg: 0.1
Type: Masonry

Hardened nail specifically designed for fixing to masonry and concrete blocks.
Countersunk head for flush fit.
35° sharp point for easy penetration.
Hardened carbon steel for extra strength.
Bright zinc plated for internal use.

TECHNICAL DATA:
Shank Dia. mm: 2.5
Corrosion Rating 1 - Clean, dry; low humidity environments
Substrates: Masonry
Length mm: 40
Size mm: 40 x 2.50
Weight kg: 0.1
Type: Masonry

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 50
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 100
Plug Size mm: 10.0 x 100
Recess Type: Pozi
Screw Size mm: 5.5 x 105
Size Dia. x L mm: 10.0 x 100
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 8
Driver Bit Size: PZ3
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 50
Plug Dia. mm: 8
Plug Length mm: 100
Plug Size mm: 8.0 x 100
Recess Type: Pozi
Screw Size mm: 4.8 x 105
Size Dia. x L mm: 8.0 x 100
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 8
Driver Bit Size: PZ3
Max Fixture Thickness mm: 40
Min Drill Hole Depth mm: 50
Plug Dia. mm: 8
Plug Length mm: 80
Plug Size mm: 8.0 x 80
Recess Type: Pozi
Screw Size mm: 4.8 x 85
Size Dia. x L mm: 8.0 x 80
Substrates: Concrete, Brick, Block

**Sold Individually**

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 110
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 160
Plug Size mm: 10.0 x 160
Recess Type: Pozi
Screw Size mm: 5.5 x 165
Size Dia. x L mm: 10.0 x 160
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 70
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 120
Plug Size mm: 10.0 x 120
Recess Type: Pozi
Screw Size mm: 5.5 x 125
Size Dia. x L mm: 10.0 x 120
Substrates: Concrete, Brick, Block

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 90
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 140
Plug Size mm: 10.0 x 140
Recess Type: Pozi
Screw Size mm: 5.5 x 145
Size Dia. x L mm: 10.0 x 140
Substrates: Concrete, Brick, Block

**Sold Individually**

A versatile and reliable fixing for attaching framework to brick, block, stone, masonry and concrete.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 10
Driver Bit Size: PZ3
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 60
Plug Dia. mm: 10
Plug Length mm: 80
Plug Size mm: 10.0 x 80
Recess Type: Pozi
Screw Size mm: 5.5 x 85
Size Dia. x L mm: 10.0 x 80
Substrates: Concrete, Brick, Block

**Sold Individually**

A light duty hammer-set through fixing for masonry.
Quick and easy fixing.
Strong collar to support drive nail.
Tough durable nylon plug.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: PZ2
Max Fixture Thickness mm: 35
Min Drill Hole Depth mm: 35
Plug Dia. mm: 6
Plug Length mm: 60
Plug Size mm: 6.0 x 60
Recess Type: Pozi
Screw Size mm: 3.5 x 65
Size Dia. x L mm: 6.0 x 60
Substrates: Concrete, Brick, Block

**Sold Individually**

A light duty hammer-set through fixing for masonry.
Quick and easy fixing.
Strong collar to support drive nail.
Tough durable nylon plug.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 8
Driver Bit Size: PZ3
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 50
Plug Dia. mm: 8
Plug Length mm: 100
Plug Size mm: 8.0 x 100
Recess Type: Pozi
Screw Size mm: 5.0 x 105
Size Dia. x L mm: 8.0 x 100
Substrates: Concrete, Brick, Block

**Sold Individually**

Nylon plug for use with coach screws into masonry. NOTE: Coach screws not included.
Anti-rotation lugs help prevent turning during installation.

TECHNICAL DATA:
Drill Hole Dia. mm: 10
Substrates: Hardwood, Softwood, Brick
To Fit Screw Dia. mm: 6.0 - 8.0

**Sold Individually**

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Nylon speed plugs are ideal for electrical installation due to non-conductivity of nylon material.
NOTE: a 6mm pre-drilled hole may be required in harder plasterboards.
3 point tip for quick insertion.
Screws not included.
A pre-drilled 6.0mm hole may be required for denser plasterboards.

TECHNICAL DATA:
Rec Screw Dia. mm: 4.5 - 5.0
Recess Type: Cross
Substrates: Plasterboard

Oval head for a concealed finish.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Approx. Pcs Per 1kg: 940
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 40
Size mm: 40
Weight kg: 1
Type: Oval

Oval head for a concealed finish.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Approx. Pcs Per 1kg: 470
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 50
Size mm: 50
Weight kg: 1
Type: Oval

A light weight nail, commonly used for cabinet making and light duty applications.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Shank Dia. mm: 1.6
Approx. Pcs Per 1kg: 2340
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 25
Size mm: 25 x 1.60
Weight kg: 1
Type: Panel Pin

A light weight nail, commonly used for cabinet making and light duty applications.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Shank Dia. mm: 1.6
Approx. Pcs Per 1kg: 1590
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 40
Size mm: 40 x 1.60
Weight kg: 0.5
Type: Panel Pin

A light weight nail, commonly used for cabinet making and light duty applications.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Shank Dia. mm: 2
Approx. Pcs Per 1kg: 770
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 50
Size mm: 50 x 2.00
Weight kg: 0.5
Type: Panel Pin

A light weight nail, commonly used for cabinet making and light duty applications.
For medium duty rust protection.

TECHNICAL DATA:
Shank Dia. mm: 1.6
Approx. Pcs Per 1kg: 1590
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 40
Size mm: 40 x 1.60
Weight kg: 0.5
Type: Panel Pin

TIMCO resin offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
An economic resin ideal for day to day non-safety critical applications.
For areas that are well ventilated at the time of installation .

TECHNICAL DATA:
Included Items: T-Flow Nozzle (Qty 1)
Max Recommended Load kg: 50
Resin Type: Polyester
Substrates: Concrete, Brick, Block, Stone
UFI Number: TMJ3-KPC6-7M1R-3GYX

TIMCO resin offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.
An economic resin ideal for day to day non-safety critical applications.
For areas that are well ventilated at the time of installation .

TECHNICAL DATA:
Included Items: T-Flow Nozzle (Qty 1)
Max Recommended Load kg: 50
Resin Type: Polyester
Substrates: Concrete, Brick, Block, Stone
UFI Number: 44H3-YPMF-1M1A-UQ2U

Used for fixing fencing and wire mesh.
For medium duty rust protection.

TECHNICAL DATA:
Shank Dia. mm: 2
Approx. Pcs Per 1kg: 1000
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Wood
Length mm: 20
Size mm: 20 x 2.00
Weight kg: 1
Type: Presser Point Staple

Used for fixing fencing and wire mesh.
For medium duty rust protection.

TECHNICAL DATA:
Shank Dia. mm: 4
Approx. Pcs Per 1kg: 135
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Wood
Length mm: 40
Size mm: 40 x 4.00
Weight kg: 1
Type: Presser Point Staple

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

The head can be punched below the surface for a concealed finish.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 240
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 65
Size mm: 65 x 3.35
Weight kg: 0.5
Type: Round Lost Head

The head can be punched below the surface for a concealed finish.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 240
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 65
Size mm: 65 x 3.35
Weight kg: 1
Type: Round Lost Head

The head can be punched below the surface for a concealed finish.
Bright nails are self coloured and have no plating.
Suitable for indoor applications.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 240
Corrosion Rating 1 - Clean, dry; low humidity environments
Length mm: 65
Size mm: 65 x 3.35
Weight kg: 2.5
Type: Round Lost Head

General use with full round head for clamping.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

General use with full round head for clamping.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

General use with full round head for clamping.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

General use with full round head for clamping.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

General use with full round head for clamping.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

General use with full round head for clamping.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 6
Approx. Pcs Per 1kg: 29
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 150
Size mm: 150 x 6.00
Weight kg: 1
Type: Round Wire

General use with full round head for clamping.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 2.65
Approx. Pcs Per 1kg: 575
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 40
Size mm: 40 x 2.65
Weight kg: 1
Type: Round Wire

General use with full round head for clamping.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 2.65
Approx. Pcs Per 1kg: 440
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 50
Size mm: 50 x 2.65
Weight kg: 1
Type: Round Wire

General use with full round head for clamping.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 2.65
Approx. Pcs Per 1kg: 440
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 50
Size mm: 50 x 2.65
Weight kg: 25
Type: Round Wire

General use with full round head for clamping.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 2.65
Approx. Pcs Per 1kg: 350
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 65
Size mm: 65 x 2.65
Weight kg: 1
Type: Round Wire

General use with full round head for clamping. For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 2.65
Approx. Pcs Per 1kg: 350
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 65
Size mm: 65 x 2.65
Weight kg: 0.5
Type: Round Wire

General use with full round head for clamping.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3.75
Approx. Pcs Per 1kg: 154
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 75
Size mm: 75 x 3.75
Weight kg: 1
Type: Round Wire

**Sold Individually**

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Bolt Length mm: 110
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 25)
Max Fixture Thickness mm: 50
Min Drill Hole Depth mm: 70
Point Type: B Point
Shield Length mm: 60
Socket Size mm: 17
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Loose
Washer Size mm: M10

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Bolt Length mm: 135
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Max Fixture Thickness mm: 75
Min Drill Hole Depth mm: 70
Point Type: B Point
Shield Length mm: 60
Socket Size mm: 17
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Loose
Washer Size mm: M10

**Sold Individually**

Ideal for fixing through the fixture once the shield has been installed into substrate.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.
<p>
TECHNICAL DATA:
Bolt Length mm: 75
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Edge Distance mm: 75
Fixture Hole Diameter mm: 10
Included Items: M8 Form A Washers (Qty 50)
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Point Type: B Point
Shield Length mm: 50
Socket Size mm: 13
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M8
Thread Type: Metric
Type: Loose
Washer Size mm: M8

**Sold Individually**

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 50)
M10 Hex Full Nuts (Qty 25)
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 70
Nut Size mm: M10
Nut Socket Size mm: 17
Point Type: B Point
Shield Length mm: 60
Stud Length mm: 100
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Projecting
Washer Size mm: M10

**Sold Individually**

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 180
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 16
Edge Distance mm: 90
Fixture Hole Diameter mm: 12
Included Items: M10 Form A Washers (Qty 50)
M10 Hex Full Nuts (Qty 25)
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 70
Nut Size mm: M10
Nut Socket Size mm: 17
Point Type: B Point
Shield Length mm: 60
Stud Length mm: 130
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M10
Thread Type: Metric
Type: Projecting
Washer Size mm: M10

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 225
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 20
Edge Distance mm: 120
Fixture Hole Diameter mm: 14
M12 Hex Full Nuts (Qty 10)
Max Fixture Thickness mm: 30
Min Drill Hole Depth mm: 85
Nut Size mm: M12
Nut Socket Size mm: 19
Point Type: B Point
Shield Length mm: 75
Stud Length mm: 120
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M12
Thread Type: Metric
Type: Projecting
Washer Size mm: M12

The projecting stud allows the fixture to be positioned into place and then fastened secure.
Compatible with most types of metric threaded components.
A three segmented expansion anchor used in concrete, brick or stone.
Torque controlled.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Edge Distance mm: 75
Fixture Hole Diameter mm: 10
Max Fixture Thickness mm: 60
Min Drill Hole Depth mm: 60
Nut Size mm: M8
Nut Socket Size mm: 13
Point Type: B Point
Shield Length mm: 50
Stud Length mm: 120
Substrates: Concrete, Brick, Stone
Thread Dia. mm: M8
Thread Type: Metric
Type: Projecting
Washer Size mm: M8

For fixing corrugated sheeting.
The twisted shank gives an enhanced pull-out resistance.
Commonly used in roofing applications. For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3.35
Approx. Pcs Per 1kg: 140
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Length mm: 65
Size mm: 65 x 3.35
Weight kg: 1
Type: Spring Head

**Sold Individually**

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 50
Screw Size mm: M5 x 50
Substrates: Plasterboard, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 50
Thread Type: Metric
Wall and Fixture Thickness mm: 20

A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. NOTE: Please allow 30mm cavity depth for the wings to open.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 14
Min Cavity Depth mm: 30
Point Type: B Point
Recess Type: Combi
Screw Length mm: 75
Screw Size mm: M5 x 75
Substrates: Drywall, Wood Panel, Block
Thread Dia. mm: M5
Thread Length mm: 75
Thread Type: Metric
Wall and Fixture Thickness mm: 45

For use with all types of builders metal work.
The twisted shank gives an enhanced pull-out resistance. For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3.75
Approx. Pcs Per 1kg: 357
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Metal
Length mm: 30
Size mm: 30 x 3.75
Weight kg: 1
Type: Square Twist

For use with all types of builders metal work.
The twisted shank gives an enhanced pull-out resistance.
For medium duty rust protection.
Conforms to Eurocode 5 and service class 2.

TECHNICAL DATA:
Shank Dia. mm: 3.75
Approx. Pcs Per 1kg: 357
Service Class 2
Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas
Substrates: Metal
Length mm: 30
Size mm: 30 x 3.75
Weight kg: 2.5
Type: Square Twist

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 140
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 10
Edge Distance mm: 70
Fixture Hole Diameter mm: 12
Max Fixture Thickness mm: 55
Min Drill Hole Depth mm: 50
Nut Size mm: M10
Nut Socket Size mm: 17
Nut Type: Hex Full
Size Thread Dia. x L mm: M10 x 120
Substrates: Concrete
Thread Dia. mm: M10
Thread Type: Metric
Washer Size mm: M10 x 21
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 100
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

**Sold Individually**

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Included Items: M12 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 120
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 110
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 8
Edge Distance mm: 55
Fixture Hole Diameter mm: 9
Included Items: M8 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 45
Nut Size mm: M8
Nut Socket Size mm: 13
Nut Type: Hex Full
Size Thread Dia. x L mm: M8 x 100
Substrates: Concrete
Thread Dia. mm: M8
Thread Type: Metric
Washer Size mm: M8 x 17
Washer Type: Form A

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded. Double countersunk head reduces the likelihood of head shear and assists completion of countersinking. Partially threaded from 1 1/4 and above. Made from C10-18 steel to ensure consistent quality. 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance. Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 3.9
Length mm: 33
Thread Length mm: 21.8
Size mm: 3.9 x 33
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.45
Substrates: Softwood
Gauge: 7
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp
Size imp.: 7 x 1

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.
Double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Partially threaded from 1 1/4 and above.
Made from C10-18 steel to ensure consistent quality.
60° twin-threads with parallel shank for faster insertion and greater pull-out resistance .
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 12
Thread Length mm: 7
Size mm: 4.0 x 12
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 8.06
Substrates: Softwood
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance