Plasterboards & Finishing

Artex Textured Finish is the original powder decorative textured finish for both ceilings and walls. It is a multifunctional product for jointing, repairing and finishing. The all-temperature mix is easy to prepare using warm or cold water. It dries white and doesn't require any decoration. Create a wide range of decorative patterns. Use it for both preparation and texturing.

Artex Textured Finish is the original powder decorative textured finish for both ceilings and walls. It is a multifunctional product for jointing, repairing and finishing. The all-temperature mix is easy to prepare using warm or cold water. It dries white and doesn't require any decoration. Create a wide range of decorative patterns. Use it for both preparation and texturing.

The Everbuild Fill & Skim 5 litre Tub is a revolutionary ready-mixed plaster substitute, formulated using lightweight polymer spheres to produce an easy-to-spread, smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish and is normally only associated with a time served plasterer.
This white-coloured Fill & Skim dries to a hard, but flexible finish, suitable for wall or ceiling application.
It will fill holes down to 25mm in one application and is the ideal choice for covering textured paint surfaces, and for restoring old pitted/uneven plastered walls/ceilings in just one quick application.
Fill & Skim is the ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g., over recessed cable trunking and around holes in walls where piping/sockets have been installed.
Once dry, Fill & Skim will not shrink, sag, or crack and is ready to paint or paper over 24 hours after application. The product finishes smooth and requires little or no sanding, and can be used for internal repairs over plaster, wood, brick, stone, and rendering.

The only jointing compound solution that does both. This Gyproc EasiFill 60 compound combines setting and air-drying meaning you can use it for both bulk filling and finishing in a working time of just 60 minutes. The filler is both fast and versatile. and y can even apply a second coat in 140 minutes, letting you finish quickly and get more done.

To view the technical & safety data sheets and certification for this product please click here.

Key facts
Powder filler, ideal for both bulk filling and finishing of joints
60 minutes working time
The second coat can be applied after 130 minutes
Conforms to EN 13963

Gyproc Joint Filler is the ideal gypsum based setting material for bedding tapes and filling plasterboard joints. A low shrinkage product for hand application with 90 minutes of working time. Used in the 3-stage method of plasterboard jointing. Setting -type plasterboard joint filler, formulated for easy mixing and consistent setting time.

Thistle MultiFinish is a gypsum finish plaster for use on a wide range of backgrounds. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes. Thistle MultiFinish is a retarded hemihydrate, pre-mixed gypsum plaster, requiring only the addition of clean water to prepare it for use.

Thistle One Coat Plaster is an undercoat and finishing plaster rolled into one. It saves time and costs by giving you a single repair product for patching repairs prior to wallpapering or tiling. Ideal for use on use on brick, block, concrete and plasterboard. It's ideal for deep-filling repairs up to 25mm on most common backgrounds and is available in smaller bags for easier handling.