Plumbing & Heating

1 1/2in FLUSH DADDY DUAL FLUSH DROP VALVE WITH 2in RUBBER CONVERTOR


FlushDaddy Flusher Dual Flush Valve


1 1/2in Flush Daddy Dual Flush Drop Valve with 2in Rubber Converter / 2in Flush Daddy Dual Flush Drop Valve

UPS3 is a high-efficiency circulator pump designed for domestic heating systems with either variable or constant flow rate. UPS3 is suitable as a universal upgrade and replacement pump.

For V4043 +V4044+V4073

LoT display, providing text feedback that gives help and programming hints
Large backlit display
Automatic Summer/Winter 1 hour time change
Extra hour facility for up to 3 hours boost or programme extension
Suitable for mains, low voltage or potential free switching

Integral stop valve. Enables seat to be cleaned without draining the system
Vacuum break ensures air collection
Simple service and cleaning
1/8" and 3/8" BSP connections
1/8" to 1/2" adaptor

Ideal for general applications
Suitable for use on uninsulated and foam lagged cylinders
Surface mounted
Double insulated
Cylinder strap & hooks

Unique and simple adjustment mechanism
Wide differential pressure range 0.1 to 0.6 bar
22mm compression fittings for ease of installation
Ensures constant flow through boiler
Reduces system noise and maintains an even system pressure

Spring return action
Three position operation
Powerhead replaceable without draining down
Manual lever for filling/draining down
Quiet operation, minimal power consumption

Dual diaphragm temperature sensing element
Suitable for surface or switch box mounting
Heat anticipator for close temperature control
10 to 30C setpoint range
Change-over contact switching (cooling loads)

Motor open
Spring return action
Manual lever for filling & draining the system
Powerhead replaceable without draining down
Potential free end switch for electrical control of pump and/or boiler

Motor open
Spring return action
Manual lever for filling & draining the system
Powerhead replaceable without draining down
Potential free end switch for electrical control of pump and/or boiler

Bi-directional flow design
Can be mounted vertically or horizontally
Integrated radiator balancing insert
Easy grip TRV head with energy saving button that alerts user to economical setting for comfort
Liquid sensor provides consistent and long-lasting performance

Bi-directional flow design
Can be mounted vertically or horizontally
Integrated radiator balancing insert
Easy grip TRV head with energy saving button that alerts user to economical setting for comfort
Liquid sensor provides consistent and long-lasting performance

Bi-directional flow design
Integrated radiator balancing insert
Can be mounted vertically or horizontally
Positive shut off
Approved to EN215

Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required.

The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes.

* The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions.