Power Tools & Accessories

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 6mm. Working Length: 52mm. Overall Length: 92mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 8mm. Working Length: 75mm. Overall Length: 120mm.

Manufactured to European standards
Cleaned propane and butane gas for cleaner combustion and to improve the working environment
Fully synthetic oil for reduced carbon deposition
High quality propellant to prevent leakage and increase shelf life
Gas filled in accordance with European Regulations (75/324/EWG)
Fuel Cell Quantity: 2
UFI Number: TVFS-62M4-J10Q-5PHF
First Fix

The Faithfull 5 Piece Forstner Bit Set, used for drilling in woodworking in preference to drill bits and flat bits whenever a very clean and precise hole is required. They also enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole is required. Supplied in an aluminium storage case. Sizes: 15, 20, 25, 30 and 35mm. Shank Size: 8mm.

The Einhell GE-CM 18/30 Li Power X-Change Lawnmower is recommended for lawns of up to 150m² in size. Fitted with a brushless motor for increased power and longer run time than a conventional carbon brush motor. Its high-quality impact-resistant plastic housing also increases product lifetime. For practical mowing, there is a 3-level axial cutting height adjustment facility. A folding long handle enables storage in minimum space. For easy transportation, there is an integrated carry handle. Its large wheels put less stress on the lawn while mowing. The battery provides the mower with a speed of up to 3,500 rpm, with a cutting width of 30cm. A battery charge level indicator with three LEDs makes it easy to keep a constant eye on the remaining power. Supplied with: 1 x 18V 3.0Ah Li-ion Battery and 1 x Charger. Specification: Cutting Width: 30cm Cutting Height Adjustment: 3 Stages, 30-70mm Grass Box Capacity: 25 litre Wheel Diameter: Front 140mm, Rear 140mm

No Load Speed: 0-3,100/min. Max. Torque: 172Nm. Capacity: Screw 4-10mm, Bolt M5-M16, HT Bolt M5-M12.

The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life. Irwin Lock-n-Load™ Quick Change Extension Bit Holder Specification: Insert bit: Standard 1/4 inch. Length: 150mm.

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 18mm. Working length: 50mm (2in). Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 22mm. Working length: 50mm (2in). Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 25mm. Working length: 50mm (2in). Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 28mm. Working length: 50mm (2in). Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications: Diameter: 32mm. Working length: 50mm (2in). Overall length: 100mm (4in).

The Olympia Tools® Jigsaw has a powerful motor. Its adjustable steel base allows for bevel cuts up to 45°. Fitted with an ergonomic soft grip for increased user comfort. Dust extraction is possible via an adaptor (supplied), enabling you to keep the workplace clean and free of debris. Supplied with: 1 x Vacuum Cleaner Adaptor and 1 x Hex Key. Specifications: Input Power: 450W. Strokes at No Load: 3,000/min. Stroke Length: 18mm. Bevel Capacity: 45°. Capacity: Steel 6mm, Wood 55mm.

Input Power: 1,100W. No Load Speed: 3,450/min. Blade: 216 x 30mm Bore. Turntable Setting (Left/Right): 47°/47°. Max. Cutting Width: 90°/45°: 120/80mm. Max. Cutting Depth: 90°/45°: 60/45mm, 90°/90°: 120x60mm. Double Mitre 45°/45°: 80x45mm. Cable Length: 2m.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

The Einhell TC-AG 115 Mini Grinder is suitable for DIY enthusiasts who want a lightweight, handy tool provides good service on cutting, grinding and roughing jobs in the garden, workshop and garage. Fitted with a disk guard for high safety during operation and a spindle lock for fast and easy tool change. Equipped with a robust, flat metal gear head, which ensures good power transmission and is very helpful in places which are difficult to access. An additional handle that can be adjusted in two positions enables user-friendly and safe handling even during long work sessions. A flange nut wrench is also provided. Cutting Disk NOT Included. Specifications: Input Power: 500 Watt. No Load Speed: 12,000/min. Disc Diameter: 115mm.

The Olympia Tools® Mini Rotary Multi-Tool has a powerful 135W motor with a variable speed selection for more control. Fitted with an easy-to-use spindle lock, making it easy to switch between the different accessories. Its soft grip handle makes it easy to hold and provides precise handling. Supplied in a handy carry case with the following accessories: 2 x Collets (2.3 & 3.2mm). 2 x HSS Drill Bits. 1 x Screw Type Mandrel. 1 x Tapered Screw Type Mandrel. 1 x Sanding Type Mandrel. 2 x Diamond Grinding Points. 10 x Grinding Stones. 3 x Sanding Discs Ø20mm/320 grit. 8 x Cut Off Wheels Ø22 x 1mm Thick. 4 x Sanding Drum Bands 16mm/120 grit. 4 x Polishing Wheels. 1 x Grinding Stone. 1 x Flexible Drive. Specifications: Input Power: 135W. No Load Speed: 10,000-32,000/min. Max. Collet Size: 3.2mm.

BLACK + DECKER Piranha Super Sanding Sheets are suitable for wood, paint and varnish, plastics, plaster and light metal sanding. Fits the following BLACK + DECKER models: MOUSE: KA150, KA150K, KA160, KA160K, KA161, KA161K, KA165GT, KA165GTK, and MT3000K. QUATTRO: KC2000FK and KC2002FK. SANDSTORM: KA250K and KA260GTK. This pack of 5 BLACK + DECKER X31034 Mouse Sanding Sheets contains: 2 x 80 Grit, 2 x 180 Grit and 1 x 240 Grit.

he Olympia Tools® Multi-Sander has a powerful 130W motor and uses a hook & loop sanding sheet fastening system. Its ergonomic, soft grip handle makes it easy to hold and provides precise handling. Fitted with a dust collection box to keep your working area clean and free from debris. Supplied with: 3 x Sanding Sheets and 1 x Removable Dust Box. Specifications: Input Power: 130W. Oscillating Speed: 14,000/min. Orbit Diameter: 1.6mm. Sand Paper Size: 140 x 140 x 80mm.

FEATURES Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate Suitable for wet and dry cutting of porcelain, stone and other hard tiles Mesh segment design ensures minimal chipping of material during cutting

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate. suitable for wet and dry cutting. Applications: guaranteed to cut porcelain, all hard stone and all ceramic tiles. Mesh segment design ensures minimal chipping of material during cutting. Cooling holes for fast effective heat reduction to ensure the stability of the centre plate whilst cutting extremely hard materials. Brand new ox photo quality screen-print ensures ultimate visibility on shelf and clear overview of blade usage. FEATURES Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate Suitable for wet and dry cutting of porcelain, stone and other hard tiles Mesh segment design ensures minimal chipping of material during cutting

The Olympia Tools® Planer has a powerful 650W motor. Its soft grip handle fits securely in the hand and helps prevent fatigue. Fitted with a removable dust bag which keeps your working area clean and free from debris. Supplied with: 1 x Parallel Guide, 1 x Rebate Guide, 2 x Reversible TCT Blades, 1 x Hex Key, 1 x Spanner and 1 x Removable Dust Bag. Specifications: Input Power: 650W. No Load Speed: 16,000/min. Planing: Width 82mm, Depth 0-2mm. Rebating Depth: 0-10mm.

FEATURES Fast cutting universal blade, with 10mm segment Features super fast turbo segment and cooling holes Applications: concrete products, clay products, granite, engineering bricks, building products

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime. Supplied with: 1 x Blade for Metal Cutting and 1 x Hex Key. Specifications: Input Power: 900W. Strokes at No Load: 0-2,800/min. Stroke Height: 20mm. Max. Cutting Depth: Wood 115mm, Steel 8mm.

FEATURES 8mm segment height. Cuts all types of tiles, including granite and marble.

FEATURES • The general purpose blade with a 12mm segment • All round performance • Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES The general purpose blade with a 12mm segment All round performance Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES The general purpose blade with a 12mm segment All round performance Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES • Guaranteed to cut all construction products including metal • Excellent fast cut universal & hard materials • Reinforced flange • Cooling holes • Semi-transparent • Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES Guaranteed to cut all construction products including metal Excellent fast cut on universal & hard materials Reinforced flange Cooling holes Semi-transparent Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES 6mm wide segment blade Fantastic value for money product Applications: mortar raking, brick raking, abrasive materials

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements. Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products). The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch. Input Power: 25W. Glue Sticks: 11.3mm Dual Melt.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide. The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided. Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor. Specifications: Input Power: 1,230 Watt. No Load Speed: 5,000/min. Blade: 160 x 16mm Bore, 24 Tooth TCT. Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools. For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices. Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger. Specifications: Strokes at No Load: 0-2,700/min. Stroke Length: 20mm. Bevel Capacity: 0-45°. Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application. Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas. The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family. Supplied with: 2 x 18V 2.0Ah Power X-Change Li-ion Batteries. 1 x Power X-Change Li-ion Charger. 1 x Carry Case. Specifications: Drill Chuck: Single Sleeve 13mm. No Load Speed: 0-400/0-1,500/min. Impact Rate: 0-6,400/0-24,000/bpm. Max. Torque: 48Nm. Torque Settings: 23. Charging Time: 80min.. Weight: 1.5kg.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete. The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations. Compatible with all other Power X-Change tools and batteries. Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case. Specifications: Modes: Screwdriving, Drilling, Hammer Drilling In Concrete. No Load Speed: 0-1,100/min. Impact Rate: 0-5,700/bpm with 1.2 joules. Capacity: Concrete 12mm. Charging Time: 30 Minutes.

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key. Specifications: Input Power: 200W. No Load Speed: 30,000-42,000/min. Oscillating Angle: 3°. Sandpaper Size: 93 x 93 x 93mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling. Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe. The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System. Bit Size: 6mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling. Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe. The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit. Bit Size: 8mm.

Vitrex Standard Diamond Blade with a continuous rim for a cleaner cut. Suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone. Wheel supplied with 22mm dia bore, and is supplied with a 16mm brass reduction ring. For use with Vitrex 103402NDE. Diameter: 110mm.

Specifications: Size: 115 x 1.2 x 22mm. 10 per tin.

Manufactured to EN 13236 quality standard. The CorePlus GP115 General-Purpose Hybrid Turbo Diamond Blade has the following specifications: Diameter: 115mm Bore: 22.23mm Segment Height: 15mm Segment Width: 2.8mm.

Contains: 6 x Phillips Screwdriver Bits: PH0, PH1, PH2(3) & PH3 6 x Pozidriv Screwdriver Bits: PZ0, PZ1, PZ2(3) & PZ3 5 x Slotted Screwdriver Bits: 3, 4, 5, 6 & 7mm 12 x Hex Screwdriver Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7 & 8mm 13 x Star Screwdriver Bits: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35 & T40 7 x Tamperproof Star Screwdriver Bits: TT10, TT15, TT20, TT25, TT27, TT30 & TT35 6 x Hex Security Screwdriver Bits: 2, 2.5, 3, 4, 5 & 6mm 5 x Spanner Bits: 4 (2), 6, 8 & 10mm 1 x Magnetic Bit Holder 60mm

NULL

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. Specifications: No Load Speed: 5,500/min. Max Cutting Depth @90º: 64mm. Blade: 184mm, 16mm Bore. Bevel Capacity: 57°. The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. Specifications: No Load Speed: 9,000/min. Disc Diameter: 125mm, M14 Spindle. The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. Specifications: No Load Speed: 0-20,000/min. Length: 310mm. DEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit. Supplied WITHOUT batteries or a charger.

The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Bare Unit, No Battery or Charger Supplied. Specifications: Strokes at No Load: 0-3,200/min. Stroke Length: 26mm. Bevel Capacity: 0-45°. Capacity: Metal 10mm, Wood 135mm.

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting. Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.