Power Tools & Accessories

These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.

To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Set of 4 Containing: No.6 (7mm), No.8 (8mm), No.10 (10mm), and No.12 (11.5mm).

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102770 Self-Adhesive Diamond Tile Drill Kit System.

Bit Size: 6mm.

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit.

Bit Size: 8mm.

Vitrex Standard Diamond Blade with a continuous rim for a cleaner cut. Suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone.

Wheel supplied with 22mm dia bore, and is supplied with a 16mm brass reduction ring.

For use with Vitrex 103402NDE.

Diameter: 110mm.

This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use.

Sold singularly or as a box of 5 bits.

Length: 60mm

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The STA1GS10DT Dual Temp Glue Sticks have the following specifications:

Length: 100mm (4 inches).
Diameter: 7mm.

Pack of 24.

The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch.

Input Power: 25W.
Glue Sticks: 11.3mm Dual Melt.

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide.
The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided.

Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor.

Specifications:

Input Power: 1,230 Watt.
No Load Speed: 5,000/min.
Blade: 160 x 16mm Bore, 24 Tooth TCT.
Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools.

For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices.

Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger.

Specifications:

Strokes at No Load: 0-2,700/min.
Stroke Length: 20mm.
Bevel Capacity: 0-45°.
Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

Blade for cutting glass, Fibreglass and ceramic tiles

Type: Tungsten Carbide ('T' Shaft)

Cutting length: 50mm

Pack Qty: 5

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application.

Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas.

The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family.

Supplied with:

2 x 18V 2.0Ah Power X-Change Li-ion Batteries.
1 x Power X-Change Li-ion Charger.
1 x Carry Case.

Specifications:

Drill Chuck: Single Sleeve 13mm.
No Load Speed: 0-400/0-1,500/min.
Impact Rate: 0-6,400/0-24,000/bpm.
Max. Torque: 48Nm.
Torque Settings: 23.
Charging Time: 80min..
Weight: 1.5kg.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete.

The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations.

Compatible with all other Power X-Change tools and batteries.

Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case.

Specifications:

Modes: Screwdriving, Drilling, Hammer Drilling In Concrete.
No Load Speed: 0-1,100/min.
Impact Rate: 0-5,700/bpm with 1.2 joules.
Capacity: Concrete 12mm.
Charging Time: 30 Minutes.

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places.

The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use.

Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key.

Specifications:

Input Power: 200W.
No Load Speed: 30,000-42,000/min.
Oscillating Angle: 3°.
Sandpaper Size: 93 x 93 x 93mm.

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 3 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 4 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 5 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 6 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 8 mm
Length 75 mm

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T101D) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T111C) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull T144D Wood Jigsaw Blades provide fast straight cuts. Ideal for hardwood, softwood and laminated boards.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull T101DP Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics..

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T119BO) Wood Jigsaw Blades are specially designed for curved cutting and ideal for epoxy, hardwood, softwood, laminated boards, insulated and heat insulation materials and plastics.

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T101B) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following:

1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving.

Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/34,000/bpm.
Torque: 27/70Nm, 15 Settings.
Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in).
No Load Speed: 0-1,000/0-2,800/0-3,250/min.
Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.
Max. Torque: 26/80/205Nm.
Weight: 1.56kg.

1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools.

No Load Speed: 0-20,000/min.
Length: 310mm.
Weight: 1.06kg.

1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

Modes: Rotary, SDS Hammer, Chisel Only.
No Load Speed: 0-1,100/min.
Impact Rate: 0-4,600/bpm with 2.1 joules
Capacity: Wood 26mm, Metal 13mm, Masonry 24mm
Weight: 3.1kg

1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle
Weight: 1.75kg

1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

No Load Speed: 5,500/min.
Max. Cutting Depth: @90º 64mm
Blade: 184 x 16mm Bore
Bevel Capacity: 57°

1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Strokes No Load: 0-3,200/min.
Stroke Length: 26mm
Bevel Capacity: 0-45°
Capacity: Wood 135mm, Metal 10mm
Weight: 2.1kg

Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK™ VI Deep Toolboxes (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Carrier Base (171229)

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

Specifications:

No Load Speed: 5,500/min.
Max Cutting Depth @90º: 64mm.
Blade: 184mm, 16mm Bore.
Bevel Capacity: 57°.

The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall.

The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

Specifications:

No Load Speed: 9,000/min.
Disc Diameter: 125mm, M14 Spindle.

The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools.

The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work.

Specifications:

No Load Speed: 0-20,000/min.
Length: 310mm.

DEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit.

Supplied WITHOUT batteries or a charger.

The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts.

Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Bare Unit, No Battery or Charger Supplied.

Specifications:

Strokes at No Load: 0-3,200/min.
Stroke Length: 26mm.
Bevel Capacity: 0-45°.
Capacity: Metal 10mm, Wood 135mm.

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting.

Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.