Screws

Pack Contains:

200 of each of 3.5 x 25mm, 3.5 x 30mm, 3.5 x 40mm, 4.0 x 30mm, 4.0 x 40mm, 4.0 x 50mm, 5.0 x 50mm.

100 of each of 5.0 x 60mm, 5.0 x 70mm, 5.0 x 80mm, 5.0 x 100mm.

Made from plastic Two part construction. One goes under the head of the screw and the other clips over to hide the head. To fit 6, 8 and 10 gauge screws.

Plastic domed caps to fit 6 and 8 gauge screws. Click on action for speed of installation.

Secures faceplates to switches and sockets. M3.5 x 25mm Raised counter sunk head Slot head Fully threaded screw

Secures faceplates to switches and sockets. M3.5 x 50mm Raised counter sunk head Slot head Fully threaded screw

Made from plastic Two part construction. One goes under the head of the screw and the other clips over to hide the head. To fit 6, 8 and 10 gauge screws.

Secures faceplates to switches and sockets. M3.5 x 25mm Raised counter sunk head Slot head Fully threaded screw

Secures faceplates to switches and sockets. M3.5 x 50mm Raised counter sunk head Slot head Fully threaded screw

Made of plastic To be fitted over screws for decorative purposes.

Plastic domed caps to fit 6 and 8 gauge screws. Click on action for speed of installation.

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

Machine Screw.
Head: Pan head, phillips compatible drive.
Finish: Zinc Plated.
Pan head has a flat under head surface allowing the screw to lay flat.

"Machine Screw. Head: Pan head, phillips compatible drive. Finish: Zinc Plated. Pan head has a flat under head surface allowing the screw to lay flat."

"Specialist Single Thread Screw. Used in mainly decorative applications fixing mirrors, glass and panels."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"Self-Tapping Screw Pozi Compatible Pan Head. Head: Pozi compatible pan head. Finish: Zinc Plated. Pan Head has a flat under head surface which allows the screw to lay flat on sheet material, reducing deformation."

"A traditional woodscrew ideally suited for fixing wrought iron ironmongery. Used to fix hinges, door handles, latches and other ironmongery. An attractive choice for use with wrought iron and other black ironmongery thanks to black japanned finish. Black japanned finish also offers increased durability and reduced weathering."

"A traditional woodscrew ideally suited for fixing wrought iron ironmongery. Used to fix hinges, door handles, latches and other ironmongery. An attractive choice for use with wrought iron and other black ironmongery thanks to black japanned finish. Black japanned finish also offers increased durability and reduced weathering."

"A traditional woodscrew ideally suited for fixing wrought iron ironmongery. Used to fix hinges, door handles, latches and other ironmongery. An attractive choice for use with wrought iron and other black ironmongery thanks to black japanned finish. Black japanned finish also offers increased durability and reduced weathering."

"A traditional woodscrew ideally suited for fixing wrought iron ironmongery. Used to fix hinges, door handles, latches and other ironmongery. An attractive choice for use with wrought iron and other black ironmongery thanks to black japanned finish. Black japanned finish also offers increased durability and reduced weathering."

The ForgeFix Organiser Pro 1200 Multi-Purpose Wood Screw Kit contains a selection of the most popular sizes. Each wood screw has a zinc yellow passivated coating for increased corrosion resistance. They also have a deep head recess for a firmer positive drive, as well as fast and easy insertion.

Supplied in an organiser case with removable cups.

Contains:

75 x Multi-Purpose Wood Screws 3.5 x 20mm
75 x Multi-Purpose Wood Screws 3.5 x 25mm
75 x Multi-Purpose Wood Screws 3.5 x 40mm
75 x Multi-Purpose Wood Screws 3.5 x 50mm
75 x Multi-Purpose Wood Screws 4.0 x 20mm
75 x Multi-Purpose Wood Screws 4.0 x 25mm
150 x Multi-Purpose Wood Screws 4.0 x 30mm
150 x Multi-Purpose Wood Screws 4.0 x 40mm
100 x Multi-Purpose Wood Screws 4.0 x 50mm
100 x Multi-Purpose Wood Screws 4.0 x 70mm
50 x Multi-Purpose Wood Screws 5.0 x 50mm
50 x Multi-Purpose Wood Screws 5.0 x 70mm
50 x Multi-Purpose Wood Screws 5.0 x 80mm
50 x Multi-Purpose Wood Screws 5.0 x 90mm
50 x Multi-Purpose Wood Screws 5.0 x 100mm

Box Contains:

3.5 x 40mm x 200pcs (Approx)
4.0 x 30mm x 200pcs (Approx)
4.0 x 40mm x 200pcs (Approx)
4.0 x 50mm x 200pcs (Approx)
5.0 x 50mm x 200pcs (Approx)
5.0 x 60mm x 200pcs (Approx)
5.0 x 100mm x 200pcs (Approx)

PZ2 Screwdriver Bit x 2

Diameter - 3.5mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 3.5mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.0mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.0mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.5mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.0mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 5.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 5.0mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 5.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.5mm

Thread form - Full

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.5mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.5mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 4.5mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 6.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 6.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Diameter - 5.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

Reisser Cutter Full Thread Screws Tub 5.0 x 80mm - 400pc

Diameter - 5.0mm

Thread form - Part

Characteristics

• Yellow tropicalized finish.
• Deep pozi drive to reduce "cam-out".
• "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength.
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers.
• Needle point for immediate start.
• Single, wide, deep, lubricated thread for lower driving resistance and fast insertion.

Applications

• For all wood applications.
• For soft wood applications.
• For hard wood applications
• For board material applications.

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Comes complete with screws.
3 point tip for quick insertion.
Come with zinc plated pan headed cross recess 4.5 x 30mm screws.

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 50
Min Embedment Depth mm: 50
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 100
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 60
Min Embedment Depth mm: 50
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 110
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 80
Min Embedment Depth mm: 50
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 130
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 100
Min Embedment Depth mm: 50
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 150
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 5
Min Embedment Depth mm: 35
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 40
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 35
Min Embedment Depth mm: 35
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 70
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

**Sold Individually**

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Designed to replace traditional masonry fixings.
TX30 TX Drive recess to reduce driver wear & prevent camming-out.
Serrated V-threads to achieve optimum insertion into all masonry types.
Zinc plated and yellow passivated for increased corrosion resistance .
High-Low thread on first 30mm to aid insertion and reduce torque.
Ideal for fitting windows and door frames.

TECHNICAL DATA:
Corrosion Rating: 1 - Clean, dry; low humidity environments
Drill Hole Dia. mm: 6
Driver Bit Size: TX30
Fixture Hole Diameter mm: 8
Included Items: TX30 S2 Bit (Qty 1)
Max Fixture Thickness mm: 40
Min Embedment Depth mm: 50
Point Type: Sharp
Recess Type: TX Drive
Salt Spray Resistance BS EN 9227 Hrs: 192
Size Dia. x L mm: 7.5 x 90
Substrates: Wood, Concrete, Brick, Block, Stone
Thread Dia. mm: 7.5
Thread Type: High-Low Start with V Flutes

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
8mm hex head countersunk with a fixed washer.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 6.7
Length mm: 100
Thread Length mm: 52
Size mm: 6.7 x 100
Fixed Washer Dia. mm: 12
Pack Quantity Unit: Pieces
Head Dia. mm: 16.08
Socket Size mm: 8
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Shank Type: Helix
Thread Type: 50° Single Deep
Point Type: Single Slash

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
8mm hex head countersunk with a fixed washer.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 6.7
Length mm: 150
Thread Length mm: 52
Size mm: 6.7 x 150
Fixed Washer Dia. mm: 12
Pack Quantity Unit: Pieces
Head Dia. mm: 16.08
Socket Size mm: 8
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Shank Type: Helix
Thread Type: 50° Single Deep
Point Type: Single Slash

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
8mm hex head countersunk with a fixed washer.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 6.7
Length mm: 200
Thread Length mm: 52
Size mm: 6.7 x 200
Fixed Washer Dia. mm: 12
Pack Quantity Unit: Pieces
Head Dia. mm: 16.08
Socket Size mm: 8
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Shank Type: Helix
Thread Type: 50° Single Deep
Point Type: Single Slash

A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Strengthened head to prevent shearing when installed with an impact tool.
Ribs under the head for improved countersinking.
Helix shank for removing debris and to improve clamping.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 4.5
Driver Bit Type: TX Drive
Length mm: 65
Thread Length mm: 42
Size mm: 4.5 x 65
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 7.98
Gauge: 9
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX20 S2 Bit (Qty 1)
Shank Type: Helix
Length inch: 2
Driver Bit Size: TX20
Thread Type: 40° Single Deep
Point Type: Twin-Cut
Size imp.: 9 x 2

A premium decking screw using the C2 twin-cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Strengthened head to prevent shearing when installed with an impact tool.
Ribs under the head for improved countersinking.
Helix shank for removing debris and to improve clamping.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 4.5
Driver Bit Type: TX Drive
Length mm: 75
Thread Length mm: 50
Size mm: 4.5 x 75
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 7.98
Gauge: 9
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX20 S2 Bit (Qty 1)
Shank Type: Helix
Length inch: 2
Driver Bit Size: TX20
Thread Type: 40° Single Deep
Point Type: Twin-Cut
Size imp.: 9 x 2

Designed for use in man-made boards such as MDF and Chipboard. The C2 twin-cut tip gives rapid pickup and reduces the likelihood of splitting, whilst the steep head design finishing teeth and self-countersinking ribs ensure a flush finish. Specifically designed dual action head - finishing teeth and self-countersinking ribs ensures a flush finish.
Plain shank for pulling the two substrates together without manual clamping.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting

TECHNICAL DATA:
Thread Dia. mm: 4.2
Length mm: 55
Thread Length mm: 30
Size mm: 4.2 x 55
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 8.2
Substrates: Hardwood, Softwood, Chipboard, MDF
Gauge: 8
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Included Items: TX20 Impact Bit (Qty 1)
Shank Type: Plain
Length inch: 2
Driver Bit Size: TX20
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 16
Thread Length mm: 11
Size mm: 3.5 x 16
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Sharp

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 20
Thread Length mm: 15
Size mm: 3.5 x 20
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut
Size imp.: 6 x

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 25
Thread Length mm: 20
Size mm: 3.5 x 25
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 30
Thread Length mm: 25
Size mm: 3.5 x 30
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 40
Thread Length mm: 35
Size mm: 3.5 x 40
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.
Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw.
Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage.
Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.
Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance.
Patented twin cut technology for rapid "pick-up" and reduces timber splitting.
All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

TECHNICAL DATA:
Thread Dia. mm: 3.5
Length mm: 50
Thread Length mm: 45
Size mm: 3.5 x 50
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 6.6
Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal
Gauge: 6
Lubrication: Gleitmo
Salt Spray Resistance BS EN 9227 Hrs: 600
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas
Length inch: 2
Driver Bit Size: PZ2
Thread Type: 40° Single
Point Type: Twin-Cut