Sika (Everbuild)

Everbuild 703 Fix & Grout Tile Adhesive is a premium grade adhesive, which has been formulated to be used as both an adhesive and grout. The product contains a fungicide to prevent mould growth and dries to a brilliant white finish.
Tested to EN 12004 type D2T.

BENEFITS:
- Excellent water resistance
- Extremely high bond strength - over double the B. S. minimum requirement in wet shear (7 days drying, 7 days water immersion followed for slight thermal movement
- Dries brilliant white
- Contains a fungicide - prevents mould growth
- Ready mixed formula - no mixing, no mess. Apply straight from the tub
- Easier to apply than most competitive adhesives
- Extended open time

AREAS FOR USE:
- Kitchen/Bathroom walls
- Shower areas
- Communal and power showers
- Work tops subject to water contact

This 709 Floor Flex Plus is a premium rubber based Latex additive for use with a self level floor compound and powder tile adhesives to both strengthen the mix and provide a limited degree of movement capability in the sub floor.
The Flex Plus is ideal for use when covering sound timber floors, and the 5-litre container is sufficient to mix a 20-kilo bag of self level floor compound or adhesive.

Everbuild 710 Febflor Flexiplus Latex is a self-smoothing and self-levelling floor compound with added latex powder for improved flexibility. Used to level out internal uneven floors where there may be a small level of movement. Ideal for use on asphalt and tar based surfaces.

Everbuild 711 TileSet Flexiplus Tile Adhesive is a quick setting floor and wall tile mortar with added latex powder for improved flexibility. Can be used on prepared wooden floors, interior and exterior use where same day fixing and grouting is required.

Tested to EN12004 Class C2FTE S1

SURFACES/ PREPARATION

Concrete/Screeds/Renders/unskimmed plasterboard/blockwork- Allow fresh concrete etc to dry for at least 4 weeks before tiling. Ensure floors are free from rising damp. Prime surfaces with EVERBUILD PVA BOND diluted 4 parts water to 1 part PVA Bond and allow to dry.

Timber Floors - Suitable for interior timber floors only. Ensure adequate ventilation beneath floors. Cover wooden floors with moisture resistant exterior grade (marine) plywood, which must be at least 12mm thick. Secure with screws, not nails, at 300mm centres. Prime with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allow to dry.

Softwood tongue and groove boarding- Boards must be screwed (not nailed) down to joists at 300mm centres and surfaces sealed with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allowed to dry.

Existing tiling. Ensure tiles are securely bonded to wall or floor. Roughen surface of glazed tiles with sander. Apply a bonding coat of neat EVERBUILD PVA BOND. Apply mixed adhesive whilst bonding coat is still tacky.

The Everbuild Aluminium Tape is made from heat and light reflective Aluminium Foil. It is heat resistant to 180°C and flame retardant to Class O. It has excellent moisture resistance, and is ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat.

Everbuild Black Jack® 903 Bitumen Trowel Mastic is a black, heavily filled, bituminous compound with added fibres for reinforcement, that is applied by trowel. It is used primarily for patching holes in roofs and bituminous coatings. The product forms a surface skin, but the mass below remains soft to allow for moderate movement.