Sika (Everbuild)

A thin solvent-based liquid that removes wet paint quickly from brushes, rollers and pads.

It works on emulsion, spirit-based paints, varnish and is water washable.

Contains conditioner to prolong brush/roller life.

Cleans up with water
Contains conditioner to prolong brush life.
Works on most common paint types.
Not suitable for cellulose paints.

The EVERBUILD Brush Restorer is a thin solvent-based liquid which removes paint from gummed up and old hardened brushes, working on all paints, it is water washable. The 500ml product has a powerful fast-acting formula.
Before opening the container THOROUGHLY read the health and safety section.
Wear the equipment detailed then hold the container away from the face, always, when removing the cap. Store the product upright with the lid securely fastened.
Use the restorer in well-ventilated areas and protect all surrounding areas from accidental splashes.
Please do not smoke whilst using this product.

Pour the brush restorer into a metallic or glass jar, do not use plastic. Immerse your brushes and leave to soak for a minimum of 2 hours or preferably overnight.
When paint begins to soften agitate the brushes against the bottom of the jar to loosen paint fragments. Repeat if necessary, then wash brushes with clean water.

The Everbuild Coving adhesive is a high strength, solvent free, adhesive providing a quick grab for fixing polystyrene, plaster coving, and cornices to sound porous surfaces. The 290ml product will also act as a sealant for filling the gaps between individual lengths of coving.
This coving adhesive dries white and can be painted over when dry.
The solvent free and environmentally friendly formula has excellent adhesion/bond strength and adheres to most common coving surfaces, and has early grab properties, usable in both vertical and horizontal positions.
The high solids formulation gives it excellent gap filling properties, it will adhere to damp surfaces, can be cleaned up with water and containing no hazardous solvents,

Uses include:
Fixing and sealing polystyrene coving, ceiling centres tiles and other decorative polystyrene products to sound surfaces.
Fixing plaster coving.
Filling gaps between coving sections.

The Everbuild EVBGFSC5 dual purpose foam cleaner is used to remove wet / uncured foam from brick, PVCu, plaster etc. This EVBGFSC5 simply attaches to Everbuild gun foam applicator for purging through, also includes spray nozzle for use without applicator to remove wet foam from outside of the gun and from most building substrates.

Easy to use with some simple steps: Pull the trigger on the gun to release the solvent into the gun barrel and discharge the solvent into a suitable container for disposal. Only stop discharging the cleaner when the solution being ejected from the gun is completely clear. Leave the gun foam cleanse attached to the gun for 5 minutes to allow the solvent in the gun to work on the residues inside. Pull the trigger once again until only clear solvent emerges. Leave for a further 5 minutes and repeat this process 2 or 3 times until the gun is completely clear.

The Everbuild Fill & Skim 5 litre Tub is a revolutionary ready-mixed plaster substitute, formulated using lightweight polymer spheres to produce an easy-to-spread, smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish and is normally only associated with a time served plasterer.
This white-coloured Fill & Skim dries to a hard, but flexible finish, suitable for wall or ceiling application.
It will fill holes down to 25mm in one application and is the ideal choice for covering textured paint surfaces, and for restoring old pitted/uneven plastered walls/ceilings in just one quick application.
Fill & Skim is the ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g., over recessed cable trunking and around holes in walls where piping/sockets have been installed.
Once dry, Fill & Skim will not shrink, sag, or crack and is ready to paint or paper over 24 hours after application. The product finishes smooth and requires little or no sanding, and can be used for internal repairs over plaster, wood, brick, stone, and rendering.

Everbuild 404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It is effective on most surfaces and also leaves a residual surface to help prevent further infestation.

Features:

- Internal and external use.
- Fast acting.
- Leaves a residual surface to prevent future infestation.
- Powerful formula. Registered with HSE under Control of Pesticides Regulations; 1986 (HSE 7183).
- Kills mould caused by damp on internal and external floors and walls.
- Kills mould growth on roofs prior to coating with bituminous coatings.
- Removes algae from patios/drives.