Fixings & Mastic

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

• 20° collation angle
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

• 20° collation angle
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

• Straight collation
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials

Ideal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.

• Straight collation
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

• 34° collation angle
• Diamond point for maximum penetration
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times
• Suitable for indoor applications
• Conforms to Eurocode 5 and Service Class 1
• Ring shank type

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

• 34° collation angle
• Diamond point for maximum penetration
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times
• Suitable for indoor applications
• Conforms to Eurocode 5 and Service Class 1
• Ring shank type

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

• 34° collation angle
• Diamond point for maximum penetration
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times
• Suitable for indoor applications
• Conforms to Eurocode 5 and Service Class 1
• Ring shank type

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

• 34° collation angle
• Diamond point for maximum penetration
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times
• Suitable for indoor applications
• Conforms to Eurocode 5 and Service Class 1
• Ring shank type

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

• 34° collation angle
• Diamond point for maximum penetration
• Clipped head to increase the number of nails per strip and therefore reduce tool loading times
• Suitable for indoor applications
• Conforms to Eurocode 5 and Service Class 1
• Plain shank type

Everbuild PVA Bond is a medium viscosity, polyvinyl alcohol stabilised, externally plasticised, vinyl acetate homopolymer. Contains no harmful phthalates.
It has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive.

BENEFITS

- Greatly improved adhesion to a wide range of substrates including dense concrete, glass, steel, tiles etc.
- Mixes may be applied in much thinner sections to salt permeation
- Reduces surface dusting of concrete
- Improved flexibility of sand cement products
- Reduced water:cement ratio for equivalent workability
- Improved frost resistance
- Reduces surface porosity of mortar/plaster

AREAS FOR USE
- As with general purpose adhesive for wood, cork, paper, textiles etc
- As an admixture for mortar/screeds/renders
- As a bonding agent for screeds/renders to difficult substrates
- As a primer/sealer in tiling applications
- As an internal filler when mixed with wood shavings, plaster etc.

The Everbuild 502 Series All Purpose Weatherproof Wood Adhesive is a high-quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength , impact-resistant bond that is usually stronger than the wood itself.

Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use.

Conforms to international standard EN 204 (D3) and BS 14256 for creep resistance.

The Everbuild 502 Series All Purpose Weatherproof Wood Adhesive is a high-quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength , impact-resistant bond that is usually stronger than the wood itself.

Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use.

Conforms to international standard EN 204 (D3) and BS 14256 for creep resistance.

The Everbuild 502 Series All Purpose Weatherproof Wood Adhesive is a high-quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength , impact-resistant bond that is usually stronger than the wood itself.

Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use.

Conforms to international standard EN 204 (D3) and BS 14256 for creep resistance.

Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole.

Screw Head Size:
Yellow: 3-4.5mm
Red: 3.5-5mm
Brown: 4-6mm
Blue: 4.5-6mm
Grey: 5-8mm

Typical Applications:

- Shelving and cabinets
- Suspended ceilings
- Switch boxes
- Trunking and cable trays
- Water heaters and radiators

These Rawlplug® UNO® Plugs have the following specification:

Colour: Blue
Size: 8 x 32mm
Pack Size: 80

Suitable for a wide range of building jobs, Bostik PVA is a highly effective primer, bonding agent, dustproofer and adhesive. Use as a primer to improve adhesion to porous or difficult surfaces prior to plastering, or as a sealer to reduce dusting of concrete and plaster surfaces. Bostik PVA is suitable for interior use in dry service conditions and will bond most building materials, provided one of the surfaces has a degree of porosity e.g. timber, plywood, block board, chipboard, fibreboard, expanded polystyrene, polyurethane foam, insulating board, brick, concrete, stone, and slate.

Made from plastic Two part construction. One goes under the head of the screw and the other clips over to hide the head. To fit 6, 8 and 10 gauge screws.

Plastic domed caps to fit 6 and 8 gauge screws. Click on action for speed of installation.

Secures faceplates to switches and sockets. M3.5 x 25mm Raised counter sunk head Slot head Fully threaded screw

Secures faceplates to switches and sockets. M3.5 x 50mm Raised counter sunk head Slot head Fully threaded screw

Made from plastic Two part construction. One goes under the head of the screw and the other clips over to hide the head. To fit 6, 8 and 10 gauge screws.

Extremely tough pins Can be used by themselves or with picture hooks. Suitable for use in normal and plasterboard walls or wooden beams.

Secures faceplates to switches and sockets. M3.5 x 25mm Raised counter sunk head Slot head Fully threaded screw

Secures faceplates to switches and sockets. M3.5 x 50mm Raised counter sunk head Slot head Fully threaded screw

Suitable for standard number 1, 2 or 3 picture hooks. Not suitable for use in hard wall surfaces

Made of plastic To be fitted over screws for decorative purposes.

Plastic domed caps to fit 6 and 8 gauge screws. Click on action for speed of installation.

The Everbuild Coving adhesive is a high strength, solvent free, adhesive providing a quick grab for fixing polystyrene, plaster coving, and cornices to sound porous surfaces. The 290ml product will also act as a sealant for filling the gaps between individual lengths of coving.
This coving adhesive dries white and can be painted over when dry.
The solvent free and environmentally friendly formula has excellent adhesion/bond strength and adheres to most common coving surfaces, and has early grab properties, usable in both vertical and horizontal positions.
The high solids formulation gives it excellent gap filling properties, it will adhere to damp surfaces, can be cleaned up with water and containing no hazardous solvents,

Uses include:
Fixing and sealing polystyrene coving, ceiling centres tiles and other decorative polystyrene products to sound surfaces.
Fixing plaster coving.
Filling gaps between coving sections.

The Everbuild EVBGFSC5 dual purpose foam cleaner is used to remove wet / uncured foam from brick, PVCu, plaster etc. This EVBGFSC5 simply attaches to Everbuild gun foam applicator for purging through, also includes spray nozzle for use without applicator to remove wet foam from outside of the gun and from most building substrates.

Easy to use with some simple steps: Pull the trigger on the gun to release the solvent into the gun barrel and discharge the solvent into a suitable container for disposal. Only stop discharging the cleaner when the solution being ejected from the gun is completely clear. Leave the gun foam cleanse attached to the gun for 5 minutes to allow the solvent in the gun to work on the residues inside. Pull the trigger once again until only clear solvent emerges. Leave for a further 5 minutes and repeat this process 2 or 3 times until the gun is completely clear.

"EVO-STIK Adhesive Cleaner is a fast and effective remover of solvented adhesive, whether its wet or dry.It is also ideal for cleaning substrates prior to bonding, in particular rubber, metals and other impervious surfaces. Removes solvented adhesives quickly and effectively. Also removes grease, wax and similar stains. Ideal for use prior to bonding. Suitable for most impervious surfaces."

"EVO-STIK GRIPFILL™ is the nation's no.1 multi-purpose, gap-filling adhesive. It has superior final bond strength and can be used on uneven surfaces. It will bond most building materials and can be used for interior and exterior applications. The nation's no.1 gap-filling adhesive! Superior final bond strength. Will bond most building materials. Can be used on uneven surfaces. Suitable for interior and exterior use."

"EVO-STIK Impact Adhesive is a high strength, multipurpose adhesive that bonds instantly on contact.With no need for clamping or support, this fast drying adhesive has the power to bond most types of materials, and will even fix non-porous surfaces together e.g. metal to metal. High strength adhesive that bonds on contact. No need for clamping or support. Multi-purpose - the ideal adhesive for emergency repairs. Bonds most materials, including metals."

"EVO-STIK Impact Adhesive is a high strength, multipurpose adhesive that bonds instantly on contact.With no need for clamping or support, this fast drying adhesive has the power to bond most types of materials, and will even fix non-porous surfaces together e.g. metal to metal. High strength adhesive that bonds on contact. No need for clamping or support. Multi-purpose - the ideal adhesive for emergency repairs. Bonds most materials, including metals."

"EVO-STIK Impact Adhesive is a high strength, multipurpose adhesive that bonds instantly on contact.With no need for clamping or support, this fast drying adhesive has the power to bond most types of materials, and will even fix non-porous surfaces together e.g. metal to metal. High strength adhesive that bonds on contact. No need for clamping or support. Multi-purpose - the ideal adhesive for emergency repairs. Bonds most materials, including metals."

"EVO-STIK Impact Adhesive is a high strength, multipurpose adhesive that bonds instantly on contact.With no need for clamping or support, this fast drying adhesive has the power to bond most types of materials, and will even fix non-porous surfaces together e.g. metal to metal. High strength adhesive that bonds on contact. No need for clamping or support. Multi-purpose - the ideal adhesive for emergency repairs. Bonds most materials, including metals."

EVO-STIK Multi Purpose Linseed Oil Putty is a putty for the external face glazing of wood and metal door and window frames. The putty is suitable for use on uneven frames and is over paintable. It has been specially formulated to give improved drying on non-porous surfaces. Perfect for face glazing of wood and metal window frames. Ideal for uneven frames.

"EVO-STIK Sticks Like Sh*t Adhesive is a superior bond strength, all weather grab adhesive that can be used on most building materials. It will even stick to wet surfaces!It will resist extreme temperatures and movement and can be used in both interior and exterior applications. Superior bond strength. Will bond most materials, even sticks to wet surfaces. Resists extreme temperatures and movement. Suitable for interior and exterior use."

"EVO-STIK Sticks Like Sh*t Adhesive is a superior bond strength, all weather grab adhesive that can be used on most building materials. It will even stick to wet surfaces!It will resist extreme temperatures and movement and can be used in both interior and exterior applications. Superior bond strength. Will bond most materials, even sticks to wet surfaces. Resists extreme temperatures and movement. Suitable for interior and exterior use."

34° collation angle<br>
Diamond point for maximum penetration<br>
Clipped head to increase the number of nails per strip and therefore reduce tool loading times<br>
Suitable for indoor and covered outdoor applications<br>
Conforms to Eurocode 5 and Service Class 2<br>
Ring shank type<BR>
Substrates: Timber Structure<BR>
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas<BR>
Nails Per Strip: 44<BR>
Collation Angle: 34°<BR>
Point Type: Diamond<BR>
Fuel Cell Quantity: 3<BR>
Fuel Cell Volume ml: 80<BR>
Service Class: 2<BR>
Shank Type: Ring<BR>
CE Standard Web: BS EN 14592:2008<BR>
Shank Dia. mm: 2.8<BR>
Eurocode: 5<BR>
Thread Length mm: 37.1<BR>
Type: Trade Pack<BR>
First Fix

34° collation angle<br>
Diamond point for maximum penetration<br>
Clipped head to increase the number of nails per strip and therefore reduce tool loading times<br>
Suitable for indoor and covered outdoor applications<br>
Conforms to Eurocode 5 and Service Class 2<br>
Ring shank type<BR>
Substrates: Timber Structure<BR>
Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas<BR>
Nails Per Strip: 44<BR>
Collation Angle: 34°<BR>
Point Type: Diamond<BR>
Fuel Cell Quantity: 3<BR>
Fuel Cell Volume ml: 80<BR>
Service Class: 2<BR>
Shank Type: Ring<BR>
CE Standard Web: BS EN 14592:2008<BR>
Shank Dia. mm: 3.1<BR>
Eurocode: 5<BR>
Thread Length mm: 43.9<BR>
Type: Trade Pack<BR>
First Fix

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

Machine Screw.
Head: Pan head, phillips compatible drive.
Finish: Zinc Plated.
Pan head has a flat under head surface allowing the screw to lay flat.

"Machine Screw. Head: Pan head, phillips compatible drive. Finish: Zinc Plated. Pan head has a flat under head surface allowing the screw to lay flat."

"Specialist Single Thread Screw. Used in mainly decorative applications fixing mirrors, glass and panels."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."

"Highly versatile and immensely popular single thread screws. Head: Countersunk pozidrive compatible recessed. Finish: Zinc Plated."