Power Tools & Accessories

This Faithfull Adjustable Pin Key for angle grinders is for use with locknuts when fitting or removing abrasive discs. It is a fully adjustable pin wrench from 15 to 52mm with a pin diameter of 4mm. The stepped spanner handle can be used to undo nuts from 10 to 19mm.
The FAIPINKEY is an ideal replacement pin wrench for most angle grinders, bench grinders, mitre saws and circular saws.

Specifications:

Capacity: 15-52mm.
Pin Diameter: 4mm.

The Black & Decker BDCDD12 Ultra Compact Drill Driver is ideal for use in hard to reach, confined areas. Provides precise control for drilling into wood, metal, plastic and all screwdriving tasks. With fingertip variable speed control for all drilling and screwdriving applications.

It has an anti-slip soft-grip for additional comfort and an LED work light to illuminate dark working areas. Uses a spring loaded battery system for quick and simple battery change whilst also providing a secure fit. The Lithium Ion battery holds over 80% of its charge over 90 days whilst idle. No need to charge unit before each use.

Ideal for all drilling tasks in wood up to 25mm and Metal up to 10mm. Also for building flat pack furniture, hanging pictures, shelves, curtain rails and blinds.

Supplied with 1 x 10.8V 1.5Ah Li-ion Battery and 1 x 8 Hour Charger.

Specification

Chuck: 10mm, 2 Sleeve.
No Load Speed: 0-550/min.
Max Torque: 12.5/26Nm, 11 Settings.
Capacity: Wood 25mm, Steel 10mm.
Sound pressure (LpA): 63 dB(A).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 18mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 22mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 25mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 28mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

Specifications:
Diameter: 32mm.
Working length: 50mm (2in).
Overall length: 100mm (4in).

The Faithfull Carbon Steel Rosehead 60° included angle countersink. For countersinking screw holes in wood for the flush fitting of screw heads.


Can be used in both hand and power drills.

Type: Rosehead
Size: 13mm (1/2in)

Shank diameter: 6mm (1/4in)
Shank length: 40mm (1.5/8in)

The Olympia Tools® Circular Saw is fitted with a powerful 1,200W motor and an adjustable steel base for cutting bevels up to 45°. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue.

Supplied with: 1 x TCT Saw Blade 160 x 20mm, 1 x Parallel Cutting Guide, 1 x Hex Key and 1 x Pin Spanner.

Specifications:

Input Power: 1,200W.
No Load Speed: 4,800/min.
Max. Cutting Depth: @90° 52mm, @45° 37mm.
Blade: 160 x 20mm Bore.
Bevel Capacity: 0-45°.

The Black & Decker KS501 Compact Jigsaw has an ergonomic, low vibration design for comfort. The integrated dust blower keeps the line of cut clear and free from debris. Fitted with a lock-on switch for increased comfort during prolonged cutting and positive bevel detents at 0 and 45°.

Suitable for general wood cutting, curved cuts and basic 45° bevelled cuts. Also for light sheet metal, metal pipe cutting, light decorative, hobby and DIY tasks.

It is supplied with 1 x Wood Cutting Blade.

Specification

Input Power: 400W
Strokes at No Load: 3,000/min.
Stroke Length: 19mm
Bevel Cut: 0-45°
Sound pressure (LpA): 89 dB(A)
Capacity: Steel 5mm, Aluminium 10mm, Wood 65mm

This Coreplus 3 Piece Blade Set supplied in a handy storage tin. The CorePlus General-Purpose Diamond Blade utilises hybrid turbo technology (HTT), interspersed turbo segments provide the optimum balance between long life and fluid speed.

It has a precision-engineered, high-grade steel tensioned core for a blade which spins true. A high concentration of premium-grade diamond per segment and a bonded cutting edge help to prevent the diamond from getting glazed over in use. Manufactured to EN 13236 quality standard.

Specifications:

Diameter: 115mm.
Bore: 22.23mm.
Segment Height: 15mm.
Segment Width: 2.8mm

"Variable pitched bi-metal holesaw for multi-use. Features a smooth and fast cutting action. Aggressive penetration and swarf clearance."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Hardened steel hammer masonry drill bits for general purpose applications. SDS+ shank. Super flute spiral aids consistent drilling speed and efficient debris removal. Tungsten carbide tipped for longer life. Hardened steel body for extra strength and reduced breakage. Suitable for masonry, concrete and stone."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High speed steel drill bits for general purpose applications. Manufactured to DIN338 standards. 118° standard tip angle. Right hand cutting at 30°, Type N. Black finish. Suitable for drilling sheet metal, hard & soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"High speed steel drill bits for general purpose applications. Manufactured to DIN338 standards. 118° standard tip angle. Right hand cutting at 30°, Type N. Black finish. Suitable for drilling sheet metal, hard & soft wood and PVC."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"Hardened steel hammer masonry drill bits for general purpose applications. SDS+ shank. Super flute spiral aids consistent drilling speed and efficient debris removal. Tungsten carbide tipped for longer life. Hardened steel body for extra strength and reduced breakage. Suitable for masonry, concrete and stone."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Precision engineered, high speed ground steel countersink bits. Manufactured to DIN335C standards. Vibration free working. Suitable for use on metal/mild metal, non ferrous metals, aluminium, sheet metal, veneered wood, laminated chipboard and PVC."

"A right angle 25mm driver and magnetic bit holder to help loosen and tighten screws or fixings in the most inaccessible places. Helps you achieve the seemingly impossible. Suitable for all 1/4"" hexagon insert bits. Zinc alloy housing for high torque applications. 1/4"" Hex shank for quick release. Max 2000 min ⁻¹/rpm. Suitable for drills 10.8V - 18V."

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"25mm quality driver bits ideal for general purpose applications. 1/4"" Hexagon drive 25mm bits. Tough - absorbing. Ideal for difficult and general screw driving applications. Zinc phosphate coated."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."