Sika (Everbuild)

Everbuild 201 Mortar Admix is an air entraining plasticiser that replaces lime in the mix. Provides an easy to work, 'butter like' consistency to the mortar. It also prevents shrinkage, cracking and crazing during setting. For use in brick laying and plastering mortars. Helps to improve frost resistance and long term resistance to freeze-thaw cycles when set. Tested to BSEN934-Part 3. Areas of Use: - Load bearing brickwork - Block laying - External/Internal rendering - Pointing/repointing brickwork

The Everbuild SBR Bond is a latex based, water-resistant bonding agent and admixture for use in areas subject to humidity, dampness and continuous water contact. Improves water resistance of cement mixtures by forming a reinforcing polymer that increases long-term durability and flexibility of the mix on renderings and floor screeds. Polymer Emulsions of this type have been used extensively over the last 20 years by the building industry as an admixture for cement and concrete applications, including repair and renovation, surfacing of floors and bonding generally. It contains anti-foam to control the density of cementitious mixes and is also freeze thaw stable, with improved frost resistance. It offers greatly improved adhesion to a wide range of substrates including dense concrete, steel, tiles etc.

Everbuild 703 Fix & Grout Tile Adhesive is a premium grade adhesive, which has been formulated to be used as both an adhesive and grout. The product contains a fungicide to prevent mould growth and dries to a brilliant white finish. Tested to EN 12004 type D2T. BENEFITS: - Excellent water resistance - Extremely high bond strength - over double the B. S. minimum requirement in wet shear (7 days drying, 7 days water immersion followed for slight thermal movement - Dries brilliant white - Contains a fungicide - prevents mould growth - Ready mixed formula - no mixing, no mess. Apply straight from the tub - Easier to apply than most competitive adhesives - Extended open time AREAS FOR USE: - Kitchen/Bathroom walls - Shower areas - Communal and power showers - Work tops subject to water contact

Everbuild 710 Febflor Flexiplus Latex is a self-smoothing and self-levelling floor compound with added latex powder for improved flexibility. Used to level out internal uneven floors where there may be a small level of movement. Ideal for use on asphalt and tar based surfaces.

Everbuild 711 TileSet Flexiplus Tile Adhesive is a quick setting floor and wall tile mortar with added latex powder for improved flexibility. Can be used on prepared wooden floors, interior and exterior use where same day fixing and grouting is required. Tested to EN12004 Class C2FTE S1 SURFACES/ PREPARATION Concrete/Screeds/Renders/unskimmed plasterboard/blockwork- Allow fresh concrete etc to dry for at least 4 weeks before tiling. Ensure floors are free from rising damp. Prime surfaces with EVERBUILD PVA BOND diluted 4 parts water to 1 part PVA Bond and allow to dry. Timber Floors - Suitable for interior timber floors only. Ensure adequate ventilation beneath floors. Cover wooden floors with moisture resistant exterior grade (marine) plywood, which must be at least 12mm thick. Secure with screws, not nails, at 300mm centres. Prime with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allow to dry. Softwood tongue and groove boarding- Boards must be screwed (not nailed) down to joists at 300mm centres and surfaces sealed with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allowed to dry. Existing tiling. Ensure tiles are securely bonded to wall or floor. Roughen surface of glazed tiles with sander. Apply a bonding coat of neat EVERBUILD PVA BOND. Apply mixed adhesive whilst bonding coat is still tacky.